Geology Reports⌕ Search

Geology topics

Donna Eberhart-Phillips

Publications and source records attributed to Donna Eberhart-Phillips.

10 recordsLinked to original sources
USGS2021

A geology and geodesy based model of dynamic earthquake rupture on the Rodgers Creek‐Hayward‐Calaveras Fault System, California

The Hayward fault in California's San Francisco Bay area produces large earthquakes, with the last occurring in 1868. We examine how physics‐based dynamic rupture modeling can be used to numerically simulate large earthquakes on not only the Hayward fault, but also its connected companions to the north and south, the Rodgers Creek and Calaveras faults. Equipped with a wealth of images of this fault system, including those of its 3D geology and 3D geometry, in addition to inferences about its interseismic creep‐rate pattern and rock‐friction behavior, we use a finite‐element computer code to perform 3D dynamic earthquake rupture simulations. We find that the rock properties affect the locations and amount of slip produced in our simulated large earthquakes. Crucial factors that control rupture behavior in our modeling are the earthquake nucleation locations, the fault geometry, and the data that reveal where the fault system is creeping or locked. Our findings suggest that large Rodgers Creek‐Hayward‐Calaveras‐Northern Calaveras (RC‐H‐C‐NC) fault‐system earthquakes may result from dynamic rupture that starts in a locked part of the fault system, but is then stopped by the creeping parts, leading to high‐magnitude‐6 earthquakes; or, from dynamic rupture that starts in a locked part of the fault system, then cascades through some of the creeping parts, leading to magnitude‐7 earthquakes.

California↗
USGS2020

Upper plate heterogeneity along the Southern Hikurangi Margin, New Zealand

Controlled and natural source seismic data are used to build a 3-D P wave model for southern North Island, New Zealand, where the Pacific Plate subducts beneath the Australian Plate at a rate of ~41 mm/year. Our analysis reveals an abrupt along-strike transition in overthrusting plate structure within Cook Strait. Contrasts in properties (Vp, Vp/Vs, and Qs) likely reflects the degree of deformation in the Australian Plate, where the Alpine-Wairau and Awatere Faults mark the northern boundary of a terrane that has undergone >50° of clockwise vertical-axis rotation since the early Miocene. Heterogeneity of the crustal transition is likely associated with changes in frictional and elastic properties that may impact elastic stress accumulation and inhibit southward propagation of megathrust earthquakes. Low connectivity of faults in Cook Strait is consistent with the heterogeneity we observe and may promote complex earthquake triggering by lateral stress loading during earthquakes or slow slip events.

Geophysical Research Letters↗
USGS2014

Imaging P and S attenuation in the Sacramento-San Joaquin Delta region, northern California

We obtain 3-D Qp and Qs models for the Delta region of the Sacramento and San Joaquin Rivers, a large fluvial-agricultural portion of the Great Valley located between the Sierra Nevada batholith and the San Francisco Bay - Coast Ranges region of active faulting. Path attenuation t* values have been obtained for P and S data from 124 distributed earthquakes, with a longer variable window for S based on the energy integral. We use frequency dependence of 0.5 consistent with other studies, and weakly favored by the t* S data. A regional initial model was obtained by solving for Q as a function of velocity. In the final model, the Great Valley basin has low Q with very low Q (<50) for the shallowest portion of the Delta. There is an underlying strong Q contrast to the ophiolite basement which is thickest with highest Q under the Sacramento basin, and a change in structure is apparent across the Suisun Bay as a transition to thinner ophiolite. Moderately low Q is found in the upper crust west of the Delta region along the faults in the eastern North Bay Area, while, moderately high Q is found south of the Delta, implying potentially stronger ground motion for earthquake sources to the south. Very low Q values in the shallow crust along parts of the major fault zones may relate to sediment and abundant microfractures. In the lower crust below the San Andreas and Calaveras-Hayward-Rodgers Creek fault zones, the observed low Q is consistent with grain-size reduction in ductile shear zones and is lowest under the San Andreas which has large cumulative strain. Similarly moderately low Q in the ductile lower crust of the Bay Area block between the major fault zones implies a broad distributed shear zone.

California↗
USGS2012

Preliminary velocity and resistivity models of the Loma Prieta Earthquake region

A preliminary three-dimensional velocity model of the Loma Prieta epicentral region in the Santa Cruz Mountains of California has been derived using raypaths from aftershocks recorded by the U.S.G.S. seismic network. In addition, a magnetotelluric sounding profile was completed prior to the earthquake and a two-dimensional resistivity model computed. The velocity and resistivity models include a low-resistivity (3–10 ohm-m), low-velocity (3.3–5.8 km/s) wedge of material between the Zayante and San Andreas faults that extends to depths of over 8 km and is interpreted to be largely Tertiary marine sedimentary rocks. A high-resistivity (>1000 ohm-m), high-velocity (6.4–6.7 km/s) zone between the San Andreas and Sargent faults may represent largely mafic intrusive rocks.

California↗
USGS2012

The 1992 Landers earthquake sequence; seismological observations

The ( M W 6.1, 7.3, 6.2) 1992 Landers earthquakes began on April 23 with the M W 6.1 1992 Joshua Tree preshock and form the most substantial earthquake sequence to occur in California in the last 40 years. This sequence ruptured almost 100 km of both surficial and concealed faults and caused aftershocks over an area 100 km wide by 180 km long. The faulting was predominantly strike slip and three main events in the sequence had unilateral rupture to the north away from the San Andreas fault. The M W 6.1 Joshua Tree preshock at 33°N58′ and 116°W19′ on 0451 UT April 23 was preceded by a tightly clustered foreshock sequence ( M ≤4.6) beginning 2 hours before the mainshock and followed by a large aftershock sequence with more than 6000 aftershocks. The aftershocks extended along a northerly trend from about 10 km north of the San Andreas fault, northwest of Indio, to the east-striking Pinto Mountain fault. The M w 7.3 Landers mainshock occurred at 34°N13′ and 116°W26′ at 1158 UT, June 28, 1992, and was preceded for 12 hours by 25 small M ≤3 earthquakes at the mainshock epicenter. The distribution of more than 20,000 aftershocks, analyzed in this study, and short-period focal mechanisms illuminate a complex sequence of faulting. The aftershocks extend 60 km to the north of the mainshock epicenter along a system of at least five different surficial faults, and 40 km to the south, crossing the Pinto Mountain fault through the Joshua Tree aftershock zone towards the San Andreas fault near Indio. The rupture initiated in the depth range of 3–6 km, similar to previous M ∼5 earthquakes in the region, although the maximum depth of aftershocks is about 15 km. The mainshock focal mechanism showed right-lateral strike-slip faulting with a strike of N10°W on an almost vertical fault. The rupture formed an arclike zone well defined by both surficial faulting and aftershocks, with more westerly faulting to the north. This change in strike is accomplished by jumping across dilational jogs connecting surficial faults with strikes rotated progressively to the west. A 20-km-long linear cluster of aftershocks occurred 10–20 km north of Barstow, or 30–40 km north of the end of the mainshock rupture. The most prominent off-fault aftershock cluster occurred 30 km to the west of the Landers mainshock. The largest aftershock was within this cluster, the M w 6.2 Big Bear aftershock occurring at 34°N10′ and 116°W49′ at 1505 UT June 28. It exhibited left-lateral strike-slip faulting on a northeast striking and steeply dipping plane. The Big Bear aftershocks form a linear trend extending 20 km to the northeast with a scattered distribution to the north. The Landers mainshock occurred near the southernmost extent of the Eastern California Shear Zone, an 80-km-wide, more than 400-km-long zone of deformation. This zone extends into the Death Valley region and accommodates about 10 to 20% of the plate motion between the Pacific and North American plates. The Joshua Tree preshock, its aftershocks, and Landers aftershocks form a previously missing link that connects the Eastern California Shear Zone to the southern San Andreas fault.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Surface seismic and electrical methods to detect fluids related to faulting

In the absence of drilling, surface-based geophysical methods are necessary to observe fault zones and fault zone physical properties at seismogenic depths. These in situ physical properties can then be used to infer the presence and distribution of fluids along faults, although such observations are by nature indirect and become less exact with greater depth. Multiple observations of a range of such geophysical properties as compressional and shear seismic velocity ( V p and V s ), V p /V5 ratio (related to Poisson's ratio), resistivity and attenuation in and adjacent to fault zones offer the greatest hope of making inferences of the fault zone geometry, fluids in the fault zone, and fluid reservoirs in the surrounding crust. For simple geometries, fault zone guided waves can provide information on fault zone width and velocities for faults of the order of 200 m wide. To address the question of whether a narrow fault zone can be imaged well enough at depths of seismic rupture to infer the presence of anomalously high fluid/rock ratios, we present synthetic seismic tomography and magnetotelluric examples for an ideal case of a narrow fault zone with a simple geometry, large changes in material properties, and numerous earthquakes within the fault zone. A synthetic 0.5-km wide fault zone with 20% velocity reduction is well imaged using local earthquake tomography. When sequential velocity inversions are done, the true fault width is found, even to 9 km depth, although the calculated amplitude of the velocity reduction is lower than the actual amplitude. V p / V s is as well determined as V p . Magnetotelluric imaging of a synthetic fault zone shows that a conductive fault zone can be well imaged within the upper 10 km. Further, a narrow (1 km) very low resistivity (3 ohm m) fault core can be imaged within a broad (5 km) low resistivity (10 ohm m) fault zone, illustrating that regions of a fault containing large quantities of interconnected fluids within a broader, conductive fault zone should be detectable. Thus variations in fluid content and fluid pressure can be inferred from electrical and seismic methods but there will always be uncertainty in these inferences due to the trade-off with other factors, such as intrinsic variations in porosity, mineralogy, and pore geometry. The best approach is combined modeling of varied seismic and electrical data.

Journal of Geophysical Research Solid Earth↗
USGS1994

Homestead Valley, California, aftershocks (March 17-18, 1979) recorded on portable seismographs

On March 15, 1979, four moderate earthquakes (ML 4.9, 5.3, 4.5, 4.8) occurred in the Homestead Valley area of the Mojave Desert (Figure 1). At that time, they were noteworthy for a vigorous aftershock sequence and for off-fault epicentral locations that formed a cruciform pattern (Hutton, et al., 1980; Stein and Lisowski, 1983). More recently, there is renewed interest in the Homestead Valley sequence because of its proximity and possible relationship to the June 28, 1992 Landers earthquake (MW 7.3). The Homestead Valley earthquakes fall within the Landers aftershock zone, and many of the Homestead Valley epicenters align with the Landers surface rupture (Figure 2).

California↗