Geology Reports⌕ Search

Geology topics

Diane E. Moore

Publications and source records attributed to Diane E. Moore.

70 records · Page 4Linked to original sources
USGS1991

Comparative geometry of the San Andreas Fault, California, and laboratory fault zones

Textural examination of fault gouge deformed in triaxial friction experiments has revealed differences in the orientations of secondary shear sets between the stably sliding and stick-slip samples. In order to determine whether such differences can be identified in natural faults, maps of recently active breaks along the San Andreas fault from Point Arena to Cajon Pass, California, were examined to compare the types and orientations of secondary structures mapped in the creeping and locked sections. The fault zone was divided into 52 geometrically defined segments of uniform strike, which were then grouped into 7 sections: 4 straight and 2 curved sections, and Cholame Valley. One of the straight sections is the creeping section between San Juan Bautista and Cholame in central California; the rest of the sections are locked. Many of the gross geometric characteristics of the individual segments, such as length, width, and stepover size, reflect their position in either a straight or a curved section. In contrast, with respect to the orientations of the recent breaks within the segments, the single creeping section differs from all of the locked sections, both straight and curved, as follows: (1) the traces of recent breaks with a more west-ward orientation than the local strike of the fault zone (P traces) dominate over those with a more northward orientation (R traces) in the creeping section, whereas the opposite relationship holds in the locked sections, and (2) the more northward-oriented (R) traces make larger angles to the local strike of the fault zone in the locked sections than in the creeping section. The latter result is consistent with the orientations of R shears in our various laboratory samples. The former result was unexpected, because of the predominance of R shears in most laboratory samples, but a small number of samples are analogous to the creeping section in terms of their P-shear abundances, R-shear orientations, and sliding behavior. The causes of these distinguishing characteristics are not yet understood.

California↗
USGS1990

Textural development of clayey and quartzofeldspathic fault gouges relative to their sliding behavior

Many of the secondary fault structures developed during triaxial friction experiments have been generally correlated with the structures of natural fault zones. Therefore, any physical differences that can be found between laboratory samples that slide stably and those that show stick-slip motion may help to identify the cause of earthquakes. We have examined petrographically the run products of many triaxial friction experiments using clayey and quartzofeldspathic gouges, which comprise the principal types of natural fault gouge material. The examined samples were tested under a wide range of temperature, confining and fluid pressure, and velocity conditions. The clayey and quartzofeldspathic gouges show some textural differences, owing to their different mineral contents and grain sizes and shapes. In the clayey gouges, for example, a clay mineral fabric and kink band sets are commonly developed, whereas in the quartzofeldspathic gouges fracturing and crushing of the predominately quartz and feldspar grains are important processes. For both types of gouge, however, and whatever the pressure-temperature-velocity conditions of the experiments, the transition from stable sliding to stick-slip motion is correlated with: (i) a change from pervasive deformation of the gouge layer to localized slip in subsidiary shears; and (ii) an increase in the angle betweem the shears that crosscut the gouge layer (Riedel shears) and ones that form along the gouge-rock cylinder boundaries (boundary shears). This suggests that the localization of shear within a fault zone combined with relatively high Riedel-shear angles are somehow connected with earthquakes. Secondary fracture sets similar to Riedel shears have been identified at various scales in major strike-slip faults such as the San Andreas of the western United States (Wallace, 1973) and the Luhuo and Fuyun earthquake faults of China (Deng and Zhang, 1984; Deng et al. , 1986). The San Andreas also contains locked and creeping sections that correspond to the stick-slip and stably sliding experimental samples, respectively. We plan to study the physical structure of the San Andreas fault, to see if the experimentally observed differences related to sliding behavior can also be distinguished in the field.

Physics and Chemistry of the Earth↗
USGS1989

Sliding behavior and deformation textures of heated illite gouge

The run products of a series of triaxial friction experiments on an illite-rich gouge have been examined petrographically to study the relationship between textural development and sliding mode. The samples show a complete range of textures, from ones in which the entire gouge layer is deformed to ones in which the deformation is concentrated along narrow subsidiary shears and the rest of the gouge layer is massive. The samples with a pervasively developed deformation fabric slide stably, whereas the samples containing shear bands show stick-slip motion if the intersection angles between boundary-parallel and cross-cutting (Riedel) shears are also relatively high. These textural differences suggest that localization of shear combined with higher-angle Riedel shears are somehow involved in stick-slip motion. The orientation of Riedel-type shears in natural fault zones may also have potential as a paleoseismological tool.

Journal of Structural Geology↗
USGS1989

New evidence for polyphase metamorphism of glaucophane schist and eclogite exotic blocks in the Franciscan Complex, California and Oregon

The early metamorphic history of high-grade exotic blocks in the Franciscan Complex may be more complicated than previously supposed. The different assemblages of high-grade glaucophane schists, eclogite, amphibolite and hornblende schist are commonly considered to have formed at the same time from essentially unmetamorphosed oceanic crust. However, new textural and mineralogical data presented here suggest that high-grade glaucophane schist and eclogite have replaced an earlier epidote-amphibolite facies assemblage that is identical to the primary assemblages in many of the hornblende-rich blocks. At least some of the hornblende-rich blocks may therefore be well-preserved remnants of the earlier metamorphism. Comparison of the mineral assemblages and element partititioning in the mixed-assemblage blocks suggests that the glaucophane schist and eclogite metamorphism took place at slightly lower temperatures but at the same or higher pressures than the earlier, hornblende-forming stage. -Authors

Journal of Metamorphic Geology↗
USGS1986

The effects of sliding velocity on the frictional and physical properties of heated fault gouge

The frictional properties of a crushed granite gouge and of gouges rich in montmorillonite, illite, and serpentine minerals have been investigated at temperatures as high as 600??C, confining pressures as high as 2.5 kbar, a pore pressure of 30 bar, and sliding velocities of 4.8 and 4.8??10-2 ??m/sec. The gouges showed nearly identical strength behaviors at the two sliding velocities; all four gouges, however, showed a greater tendency to stick-slip movement and somewhat higher stress drops in the experiments at 4.8??10-2 ??m/sec. Varying the sliding velocity also had an effect on the mineral assemblages and deformation textures developed in the heated gouges. The principal mineralogical difference was that at 400??C and 1 kbar confining pressure a serpentine breakdown reaction occurred in the experiments at 4.8??10-2 ??m/sec but not in those at 4.8 ??m/sec. The textures developed in the gouge layers were in part functions of the gouge type and the temperature, but changes in the sliding velocity affected, among other features, the degree of mineral deformation and the orientation of some fractures. ?? 1986 Birkha??user Verlag.

Pure and Applied Geophysics PAGEOPH↗
USGS1985

PERMEABILITY CHANGES IN CRYSTALLINE ROCKS DUE TO TEMPERATURE: EFFECTS OF MINERAL ASSEMBLAGE.

The change in permeability with time of granite, quartzite, anorthosite and gabbro was measured while these rocks were subjected to a temperature gradient. Permeability reductions of up to two orders of magnitude were observed, with the greatest reactions occurring in the quartzite. These changes are thought to be caused by dissolution of minerals at high temperatures, and redeposition of the dissolved material at lower temperatures. Quartz appears to be an important mineral in this self-sealing process. If very low permeability is desired around a nuclear waste repository in crystalline rocks, then a quartz-rich rock may be the most appropriate host.

Conference Paper↗
USGS1984

Metamorphic history of a high-grade blueschist exotic block from the Franciscan complex, California

A high-grade blueschist tectonic block from the Franciscan Complex of the northeast Diablo Range shows evidence of three episodes of retrograde blueschist facies metamorphism ± deformation developed under progressively declining P-T conditions. The first retrograde metamorphism involved formation of an outer rind of actinolite + chlorite + rutile ± phengite, and the growth of coarse-grained chlorite + pumpellyite within the block. During the second event the rind and outer edge of the blueschist were folded, sheared and fractured, and primary glaucophane within the blueschist was replaced by albite, medium-grained chlorite, and glaucophane-crossite. The third retrograde metamorphism was marked by the pseudomorphic replacement of rind actinolite by aragonite and quartz. Aragonite also crystallized extensively within th block, accompanied by lawsonite, chlorite, jadeitic pyroxene, and crossite; this last mineral assemblage is identical to that of the surrounding Franciscan metasedimentary rocks. Features characteristic of the first and second retrograde metamorphic events are readily observed in other high-grade tectonic blocks of the Franciscan Complex and the correlative Otter Point Formation of Oregon. In contrast, evidence of a third retrograde metamorphism, matching that of presently associated Franciscan and Otter Point rocks, has been found in some but not all blocks examined so far. The high P/T conditions of prograde metamorphism and the available metamorphic age determinations suggest that the tectonic blocks originally formed in a pre-Franciscan subduction zone setting. Fragments of blueschist and eclogite from this metamorphic terrain were tectonically incorporated in a serpentinite diapir, and they developed alteration rinds through interaction with the enclosing ultramafic rock. The available data suggest that the examined exotic block and at least some others were transferred to the Franciscan as detritus from a body of serpentinite that reached the earth's surface. Such blocks were then resubducted and metamorphosed along with their presently associated sedimentary sequences.

Journal of Petrology↗
USGS1983

Chemical reactions accompanying fluid flow through granite held in a temperature gradient

Distilled water was passed at a low rate down a temperature gradient through cylinders of Barre and Westerly Granite. Temperatures ranged from 80–100°C at the outer edges of the cylinders to 250–300°C in central, drilled holes which housed the heating coils. The measured permeabilities of the granite cylinders decreased by as much as two orders of magnitude in experiments of 1–3 weeks' duration. The amount of permeability decrease varied directly with temperature and inversely with the rate of fluid flow. The compositions of the fluids discharged from the granites were functions of temperature and flow rate as well as mineral composition, with dissolved silica concentrations showing trends different from those of the other analyzed species. Fluids from experiments run at higher temperatures but at much lower initial rates of fluid flow had higher concentrations of most ions but substantially lower dissolved silica contents. In contrast, an increase in temperature at similar rates of fluid flow resulted in higher silica concentrations. In the experiments, the distilled water acquired enough dissolved materials at high temperatures to become supersaturated with respect to several minerals at the low-temperature edges of the cylinders. Some of this material, particularly silica, was deposited along grain boundaries and microfractures, causing the observed permeability decreases. The very low rates of fluid flow in some high-temperature experiments significantly increased the rates of SiO 2 precipitation and reduced dissolved silica concentrations relative to other species in the discharged fluids.

Geochimica et Cosmochimica Acta↗
USGS1981

Chemical modifications accompanying blueschist facies metamorphism of Franciscan conglomerates, Diablo Range, California

As part of an investigation of blueschist-facies mineral parageneses in pebbles and matrix of some Franciscan metaconglomerates of the Diablo Range, California, textural and major-element chemical analyses were conducted on a number of igneous pebbles that comprise a range of rock types from granite and dacite to gabbro and basalt. Compositions of the igneous pebbles differ significantly from common igneous rocks, particularly with respect to Ca, K, Na, Si and H2O. The SiO2 and H2O contents are characteristically high and the K2O contents low. The CaO and Na2O contents may be relatively enriched or reduced in different pebbles. The igneous pebbles show little evidence of alteration prior to their incorporation into the Franciscan conglomerates, and the chemical modifications are considered to have been produced during metamorphism of the conglomerates to (lawsonite + albite + aragonite ?? jadeite)-bearing assemblages. The observed variations in the pebbles are shown to be functions of: (1) bulk chemistry; (2) the igneous mineral assemblage; (3) the stable metamorphic mineral assemblage; and (4) the composition of pore fluids in the conglomerates. The relative proportions of Mg and Fe in most of the pebbles apparently have been unaffected by the metamorphism, and these parameters, along with other textural and chemical factors, were used to determine the petrogenetic affinities of the igneous pebbles. The plutonic and most of the volcanic pebbles correspond to calc-alkaline rock series, whereas a few volcanic pebbles show apparent Fe-enrichment characteristic of tholeiitic rocks. A continental margin arc-batholith complex would be the best source for these igneous detrital assemblages. Conglomerates in local areas differ in igneous lithologies from conglomerates in other areas and probably differ somewhat in age, perhaps reflecting varying degrees of unroofing of such a complex during deposition of Franciscan sediments. ?? 1981.

Chemical Geology↗