Geology Reports⌕ Search

Geology topics

David W. Moore

Publications and source records attributed to David W. Moore.

At least 19 recordsLinked to original sources
USGS2022

Interlaboratory comparison of three sediment bioaccumulation tests

Standard bioaccumulation tests are commonly conducted using Macoma nasuta (clam), and Alitta virens (polychaete) for marine tests, and Lumbriculus variegatus (an oligochaete) for freshwater tests. Because the interlaboratory variability associated with these tests is unknown, four experienced laboratories conducted standard 28-day bioaccumulation tests with the above species using sediments contaminated with polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs). Chemical analysis of tissue samples was performed by a single laboratory. The intralaboratory variance among replicates was relatively low for PCB tissue concentrations, with coefficients of variation (CVs) ranging from 9% to 28% for all laboratories and species, with the exception of one laboratory reporting higher variability for L . variegatus (CV = 51%). Intralaboratory variance for PCB tissue concentrations was higher than interlaboratory variance for A. virens and L . variegatus , and the magnitude of difference (MOD) for laboratory means ranged from 1.4 to 2.0 across species. Intralaboratory variability was also low for lipid content, and lipid normalization of PCB and PAH body residues generally had little impact on variability. In addition to variability across bioassay laboratories, analytical variability was evaluated by different laboratories measuring the concentration of PCBs and total lipids in a subsample of tissue homogenate of sediment-exposed test organisms. Variability associated with tissue analysis was higher than bioassay laboratory variability only in tests with L . variegatus . Statistical differences between samples may be observed due to the low intralaboratory variability; however, the biological significance of these differences may be limited because the MOD is low. Considering the MOD when comparing bioaccumulation across treatments accounts for uncertainty related to inherent variability of the test in the interpretation of statistically significant results.

Massachusetts↗
USGS2018

Geologic map of the Pagosa Springs 7.5' quadrangle, Archuleta County, Colorado

The geologic map of the Pagosa Springs 7.5’ quadrangle in southwestern Colorado includes the town of Pagosa Springs that is partly known for its hot springs. The quadrangle is southwest of the San Juan volcanic mountains (Oligocene) and north of the San Juan Basin. All bedrock units exposed in the map area are Upper Cretaceous in age except a minor canyon outcrop of Jurassic rock. Early Holocene deposits are mainly alluvial gravels and outwash on terraces. Structure is simple: shale and sandstone beds dip at low angles east-to-northeast as a broad limb of the north-northwest striking Archuleta anticline. Three geologic cross sections controlled by drill holes are included and depict Mesozoic bedrock and faults down to and including shallow Precambrian basement rock. A brief geologic history of the region is described.

Colorado↗
USGS2009

Evansville Area Earthquake Hazards Mapping Project (EAEHMP)— Progress report, 2008

Maps of surficial geology, deterministic and probabilistic seismic hazard, and liquefaction potential index have been prepared by various members of the Evansville Area Earthquake Hazard Mapping Project for seven quadrangles in the Evansville, Indiana, and Henderson, Kentucky, metropolitan areas. The surficial geologic maps feature 23 types of surficial geologic deposits, artificial fill, and undifferentiated bedrock outcrop and include alluvial and lake deposits of the Ohio River valley. Probabilistic and deterministic seismic hazard and liquefaction hazard mapping is made possible by drawing on a wealth of information including surficial geologic maps, water well logs, and in-situ testing profiles using the cone penetration test, standard penetration test, down-hole shear wave velocity tests, and seismic refraction tests. These data were compiled and collected with contributions from the Indiana Geological Survey, Kentucky Geological Survey, Illinois State Geological Survey, United States Geological Survey, and Purdue University. Hazard map products are in progress and are expected to be completed by the end of 2009, with a public roll out in early 2010. Preliminary results suggest that there is a 2 percent probability that peak ground accelerations of about 0.3 g will be exceeded in much of the study area within 50 years, which is similar to the 2002 USGS National Seismic Hazard Maps for a firm rock site value. Accelerations as high as 0.4-0.5 g may be exceeded along the edge of the Ohio River basin. Most of the region outside of the river basin has a low liquefaction potential index (LPI), where the probability that LPI is greater than 5 (that is, there is a high potential for liquefaction) for a M7.7 New Madrid type event is only 20-30 percent. Within the river basin, most of the region has high LPI, where the probability that LPI is greater than 5 for a New Madrid type event is 80-100 percent.

Indiana, Kentucky↗
USGS2009

Surficial geologic map of the Evansville, Indiana, and Henderson, Kentucky, area

The geologic map of the Evansville, Indiana, and Henderson, Kentucky, area depicts and describes surficial deposits according to their origin and age. Unconsolidated alluvium and outwash fill the Ohio River bedrock valley and attain maximum thickness of 33-39 m under Diamond Island, Kentucky, and Griffith Slough, south of Newburgh, Indiana. The fill is chiefly unconsolidated, fine- to medium-grained, lithic quartz sand, interbedded with clay, clayey silt, silt, coarse sand, granules, and gravel. Generally, the valley fill fines upward from the buried bedrock surface: a lower part being gravelly sand to sandy gravel, a middle part mostly of sand, and a surficial veneer of silt and clay interspersed with sandy, natural levee deposits at river's edge. Beneath the unconsolidated fill are buried and discontinuous, lesser amounts of consolidated fill unconformably overlying the buried bedrock surface. Most of the glaciofluvial valley fill accumulated during the Wisconsin Episode (late Pleistocene). Other units depicted on the map include creek alluvium, slackwater lake (lacustrine) deposits, colluvium, dune sand, loess, and sparse bedrock outcrops. Creek alluvium underlies creek floodplains and consists of silt, clayey silt, and subordinate interbedded fine sand, granules, and pebbles. Lenses and beds of clay are present locally. Silty and clayey slackwater lake (lacustrine) deposits extensively underlie broad flats northeast of Evansville and around Henderson and are as thick as 28 m. Fossil wood collected from an auger hole in the lake and alluvial deposits of Little Creek, at depths of 10.6 m and 6.4 m, are dated 16,650+-50 and 11,120+-40 radiocarbon years, respectively. Fossil wood collected from lake sediment 16 m below the surface in lake sediment was dated 33,100+-590 radiocarbon years. Covering the hilly bedrock upland is loess (Qel), 3-7.5 m thick in Indiana and 9-15 m thick in Kentucky, deposited about 22,000-12,000 years before present. Most mapped surficial deposits in the quadrangle are probably no older than about 55,000 years. Lithologic logs, shear-wave velocities, and other cone penetrometer data are used to interpret depositional environments and geologic history of the surficial deposits. This map, which includes an area of slightly more than seven 7.5-minute quadrangles, serves several purposes. It is a tool for assessing seismic and flood hazards of a major urban area; aids urban planning; conveys geologic history; and locates aggregate resources. The map was produced concurrently with research by seismologists to determine places where the surficial deposits may tend to liquefy and (or) to amplify ground motions during strong earthquakes. Such hazardous responses to shaking are related to the characteristics of the geologic materials and topographic position, which the geologic map depicts. The geologic map is an element in the cooperative seismic hazard assessment program among the States of Indiana, Kentucky, and Illinois and the U.S. Geological Survey, funded by the National Earthquake Hazards Reduction Program and National Cooperative Geologic Mapping Program of the U.S. Geological Survey.

Indiana, Kentucky↗
USGS2007

Surficial Geologic Map of the West Franklin Quadrangle, Vanderburgh and Posey Counties, Indiana, and Henderson County, Kentucky

The valley of the Ohio River is filled with alluvium and outwash (unit Qal), which total 33-39 m thick under the land surface in the southeast part of the West Franklin quadrangle in Indiana, and 30.5-35 m thick under Diamond Island in the southwest corner of the quadrangle. The deposits are chiefly fine- to medium-grained, lithic quartzose sand, interbedded by lenses of clay, clayey silt, silt, coarse sand, granules, and gravel. Although grain size of the river alluvium varies widely, in general it fines upward-being gravelly sand to sandy gravel in the lower part, mainly sand in the middle part, and silty and clayey in the upper part (Holocene). The middle and lower parts probably accumulated during the Wisconsin Episode (late Pleistocene). The sandy middle part contains interbeds of clay, silt, and minor gravel. At the base is highly consolidated mud (silt and clay), sand, and gravel 2-10 m thick. This unit may be valley train that predates the Wisconsin Episode. Creek alluvium (unit Qa) is silt, clayey silt, and subordinate intercalated fine sand, granules, and pebbles; the coarser grains are generally concentrated in the basal 1-2 m of the deposit. Lenses and beds of clay are present locally. Fossil wood collected from an auger hole in the alluvial deposits of Little Creek, at depths of 10.6 m and 6.4 m, were dated 16,650?50 and 11,120?40 radiocarbon years, respectively. Probable lacustrine terrace silt and clay (Qlt), so-called slackwater-lake or backwater deposits, form deposits 12-22 m thick in the lowest reaches of tributary creeks to the Ohio River. The surfaces of the lacustrine deposits are terraces a few meters higher than the modern creek flood plains. Covering the bedrock upland is loess (Ql) 3-7.5 m thick, deposited about 18,000-12,000 years before present. Most surficial deposits in the quadrangle are probably no older than about 35,000 yrs. Lithologic logs, shear-wave velocities, and other cone penetrometer data are used to interpret depositional environments and geologic history of the alluvium and lacustrine deposits.

Scientific Investigations Map↗
USGS2007

Pliocene and Quaternary deposits in the northern part of the San Juan Basin in southwestern Colorado and northwestern New Mexico

Unconsolidated late Cenozoic deposits in the northern part of the San Juan Basin range in age from late Pliocene to Holocene. Most of the deposits are alluvial gravel composed of resistant quartzite, sandstone, and igneous, metamorphic, and volcanic rocks derived from the uplifted central core of the San Juan Mountains 20-50 miles (32-80 kilometers) north of the basin. Alluvial deposits are most voluminous in the Animas Valley, but deposits of gravel of the same general age are present in the La Plata, Florida, Los Pinos, and Piedra River valleys as well. Alluvial gravel forms tabular deposits, generally about 20 feet (6 meters) thick, that are exposed beneath a sequence of terraces at many levels above the rivers. Gravel layers 360 feet (110 meters) or less above the Animas River are glacial outwash. The gravel layers begin at the south toes of end moraines and extend discontinuously downvalley at least 10-20 miles (16-32 kilometers). Farther south, distinction between outwash and nonglacial alluvium is problematical. Alluvial gravel beneath higher terraces does not grade to end moraines. Glacial till forms a series of end moraines at the north edge of the town of Durango. The oldest moraines are farthest downvalley, are higher above the river, and have more mature surficial soils than do moraines farther north. The two youngest moraines, the Animas City moraines, are interpreted to be Pinedale in age. They have narrow, ridgelike crests and form nearly unbroken arcs across the valley floor. Small segments of still more weathered moraines, the Spring Creek moraines, are 170-230 feet (52-70 meters) above the river and are 660-990 feet (200-300 meters) farther downvalley. The oldest moraines, the Durango moraines, are on the north end of the unnamed mesa on which Fort Lewis College is located. The base is about 180 feet (55 meters) above the river. These oldest moraines may be of Bull Lake age. Alluvial fans, pediment gravel, and landslides are scattered at several levels in various valleys within the northern San Juan Basin. Except where the Lava Creek B volcanic ash (0.639 mega-annum) is interbedded in them, these crudely bedded accumulations of sandy or clayey material washed from side drainages and added little to our reconnaissance stratigraphic study. Scattered landslide deposits consist of unsorted, mixed soil and fragments of rock. Loess and local silty and clayey sheetwash alluvium 6-12 feet (2-4 meters) thick form a veneer on low terraces. On higher terraces, such as Red Mesa east of the La Plata River and Florida Mesa east of the Animas River, loess and sheetwash alluvium generally are about 20 feet (6 meters) thick but can be as thick as 40-50 feet (12-15 meters) in places on Florida Mesa. When using the Lava Creek B volcanic ash as a time datum, apparently the timing of late Cenozoic continental deposition in the region was broadly similar to that in the Denver Basin-Front Range region and some other glaciated mountain ranges in the Rocky Mountains. A more accurate dating of Quaternary alluviation must await a thorough dating of the deposits. Thick, extensive outwash gravel indicates enhanced deposition during glacial epochs.

Colorado, New Mexico↗
USGS2005

Preliminary integrated geologic map databases for the United States: Central states: Montana, Wyoming, Colorado, New Mexico, North Dakota, South Dakota, Nebraska, Kansas, Oklahoma, Texas, Iowa, Missouri, Arkansas, and Louisiana

The growth in the use of Geographic Information Systems (GIS) has highlighted the need for regional and national digital geologic maps attributed with age and lithology information. Such maps can be conveniently used to generate derivative maps for purposes including mineral-resource assessment, metallogenic studies, tectonic studies, and environmental research. This Open-File Report is a preliminary version of part of a series of integrated state geologic map databases that cover the entire United States. The only national-scale digital geologic maps that portray most or all of the United States for the conterminous U.S. are the digital version of the King and Beikman (1974a, b) map at a scale of 1:2,500,000, as digitized by Schruben and others (1994) and the digital version of the Geologic Map of North America (Reed and others, 2005a, b) compiled at a scale of 1:5,000,000 which is currently being prepared by the U.S. Geological Survey. The present series of maps is intended to provide the next step in increased detail. State geologic maps that range in scale from 1:100,000 to 1:1,000,000 are available for most of the country, and digital versions of these state maps are the basis of this product. In a few cases, new digital compilations were prepared (e.g. OH, SC, SD) or existing paper maps were digitized (e.g. KY, TX). For Alaska and Hawaii, new regional maps are being compiled and ultimately new state maps will be produced. The digital geologic maps are presented in standardized formats as ARC/INFO (.e00) export files and as ArcView shape (.shp) files. Accompanying these spatial databases are a set of five supplemental data tables that relate the map units to detailed lithologic and age information. The maps for the CONUS have been fitted to a common set of state boundaries based on the 1:100,000 topographic map series of the United States Geological Survey (USGS). When the individual state maps are merged, the combined attribute tables can be used directly with the merged maps to make derivative maps. No attempt has been made to reconcile differences in mapped geology across state lines. This is the first version of this product and it will be subsequently updated to include four additional states (North Dakota, South Dakota, Nebraska, and Iowa)

Arkansas, Colorado, Iowa, Kansas, Louisiana, Misso↗
USGS2005

Use of sediment quality guidelines

Are sediment quality guidelines (SQGs) adequately able to predict the presence or absence of chronic toxicity to sediment-dwelling organisms in field-collected sediments? Can SQGs predict effects resulting from the bioaccumulation of sediment-associated contaminants? Do SQGs define cause-and-effect relationships? Can they predict effects on organisms exposed in the field on the basis of amphipod mortality measured in the laboratory? These and other questions brought together 55 scientists from 8 countries for a Pellston Workshop convened by the Society of Environmental Toxicology and Chemistry (SETAC) in Fairmont, Montana, USA. In this book, these experts in ecology, ecotoxicology, engineering, environmental regulation, and risk assessment examine the scientific underpinnings of sediment quality guidelines and provide recommendations on the appropriate use of SQGs in the assessment and management of contaminated sediments.

Book↗
USGS2004

Surficial geologic map of the southeast Memphis Quadrangle, Shelby County, Tennessee

The depiction of geology on this map is designed to aid in urban planning and analysis of potential damage in the event of strong earthquake motion. The geologic map by itself does not analyze potential earthquake damage, but is designed to be used by seismologists who perform such analyses. Wind-deposited silt and clayey silt (loess) is the predominant surficial deposit. Loess entirely covers the upland (everyplace in the map area that is not a valley occupied by a stream) to depths of 4.5-16 m. The second most abundant deposit is silty alluvium, which is confined to the narrow floodplains and is 1-10 m thick. Sparse, unconsolidated, pebbly sand alluvium is 0.5-3 m thick and is confined to point bars and channel deposits in the narrow, incised channel of Nonconnah Creek. The nature of geologic materials to a degree determines the severity of damage to infrastructure sustained during a strong earthquake.

Scientific Investigations Map↗
USGS2004

Surficial geologic map of the southwest Memphis Quadrangle, Shelby County, Tennessee, and Crittenden County, Arkansas

This map is one of seven 1:24,000-scale (7.5-minute) quadrangle maps of the surficial geology of the Memphis, Tennessee, area--part of a series of urban hazard maps. Wind-deposited silt and clayey silt (loess) is the predominant surficial deposit in this quadrangle. The loess was deposited as dust during the last major continental glaciation of the region and it covers the upland to depths of 4.5-16 m. River alluvium (unit Qal), which is chiefly a sandy and gravelly sand deposit about 30 m thick, underlies the Mississippi River floodplain. This unit supports extensive artificial fill and infrastructure used for shipping storage and petroleum processing and storage. Based on paleoliquefaction structures (sand boils) documented in Mississippi River alluvium elsewhere, this unit probably has the potential to liquefy during strong earthquake shaking. No paleoliquefaction structures were observed within the Southwest Memphis quadrangle. Another deposit in the quadrangle is silty alluvium of the Nonconnah Creek floodplain, and is 1-10 m thick. Sparse, unconsolidated pebbly sand deposits are 0.5-3 m thick and make up point bars and channel deposits of Nonconnah Creek.

Scientific Investigations Map↗
USGS2003

A spatial database of bedding attitudes to accompany Geologic Map of Boulder-Fort Collins-Greeley area, Colorado

This digital map shows bedding attitude data displayed over the geographic extent of rock stratigraphic units (formations) as compiled by Colton in 1976 (U.S.Geological Survey Map I-855-G) under the Front Range Urban Corridor Geology Program. Colton used his own mapping and published geologic maps having varied map unit schemes to compile one map with a uniform classification of geologic units. The resulting published color paper map was intended for planning for use of land in the Front Range Urban Corridor. In 1997-1999, under the USGS Front Range Infrastructure Resources Project, Colton's map was digitized to provide data at 1:100,000 scale to address urban growth issues(see cross-reference). In general, the west part of the map shows a variety of Precambrian igneous and metamorphic rocks, major faults and brecciated zones along an eastern strip (5-20 km wide) of the Front Range. The eastern and central part of the map (Colorado Piedmont) depicts a mantle of Quaternary unconsolidated deposits and interspersed Cretaceous or Tertiary-Cretaceous sedimentary rock outcrops. The Quaternary mantle is comprised of eolian deposits (quartz sand and silt), alluvium (gravel, sand, and silt of variable composition), colluvium, and few landslides. At the mountain front, north-trending, dipping Paleozoic and Mesozoic sandstone and shale formations (and sparse limestone) form hogbacks, intervening valleys, and in range-front folds, anticlines, and fault blocks. Localized dikes and sills of Tertiary rhyodacite and basalt intrude rocks near the range front, mostly in the Boulder area.

Colorado↗
USGS2003

A spatial database of bedding attitudes to accompany Geologic map of the greater Denver area, Front Range Urban Corridor, Colorado

This digital map shows bedding attitude symbols display over the geographic extent of surficial deposits and rock stratigraphic units (formations) as compiled by Trimble and Machette 1973-1977 and published in 1979 (U.S. Geological Survey Map I-856-H) under the Front Range Urban Corridor Geology Program. Trimble and Machette compiled their geologic map from published geologic maps and unpublished geologic mapping having varied map unit schemes. A convenient feature of the compiled map is its uniform classification of geologic units that mostly matches those of companion maps to the north (USGS I-855-G) and to the south (USGS I-857-F). Published as a color paper map, the Trimble and Machette map was intended for land-use planning in the Front Range Urban Corridor. This map recently (1997-1999), was digitized under the USGS Front Range Infrastructure Resources Project (see cross-reference). In general, the mountainous areas in the west part of the map exhibit various igneous and metamorphic bedrock units of Precambrian age, major faults, and fault brecciation zones at the east margin (5-20 km wide) of the Front Range. The eastern and central parts of the map (Colorado Piedmont) depict a mantle of unconsolidated deposits of Quaternary age and interspersed outcroppings of Cretaceous or Tertiary-Cretaceous sedimentary bedrock. The Quaternary mantle is comprised of eolian deposits (quartz sand and silt), alluvium (gravel, sand, and silt of variable composition), colluvium, and few landslides. At the mountain front, north-trending, dipping Paleozoic and Mesozoic sandstone, shale, and limestone bedrock formations form hogbacks and intervening valleys.

Open-File Report↗