Geology Reports⌕ Search

Geology topics

David V. Smith

Publications and source records attributed to David V. Smith.

13 recordsLinked to original sources
USGS2016

Construction of a groundwater-flow model for the Big Sioux Aquifer using airborne electromagnetic methods, Sioux Falls, South Dakota

The city of Sioux Falls is the fastest growing community in South Dakota. In response to this continued growth and planning for future development, Sioux Falls requires a sustainable supply of municipal water. Planning and managing sustainable groundwater supplies requires a thorough understanding of local groundwater resources. The Big Sioux aquifer consists of glacial outwash sands and gravels and is hydraulically connected to the Big Sioux River, which provided about 90 percent of the city’s source-water production in 2015. Managing sustainable groundwater supplies also requires an understanding of groundwater availability. An effective mechanism to inform water management decisions is the development and utilization of a groundwater-flow model. A groundwater-flow model provides a quantitative framework for synthesizing field information and conceptualizing hydrogeologic processes. These groundwater-flow models can support decision making processes by mapping and characterizing the aquifer. Accordingly, the city of Sioux Falls partnered with the U.S. Geological Survey to construct a groundwater-flow model. Model inputs will include data from advanced geophysical techniques, specifically airborne electromagnetic methods.

South Dakota↗
USGS2016

Geologic and geophysical models for Osage County, Oklahoma, with implications for groundwater resources

This report summarizes a three-dimensional (3-D) geologic model that was constructed to provide a framework to investigate groundwater resources of the Osage Nation in northeastern Oklahoma. This report also presents an analysis of an airborne electromagnetic (AEM) survey that assessed the spatial variation of electrical resistivity to depths as great as 300 meters in the subsurface. The report and model provide support for a countywide assessment of groundwater resources, emphasizing the Upper Pennsylvanian rock units in the shallow subsurface of central and eastern Osage County having electrical resistivity properties that may indicate aquifers. Surface outcrops and subsurface stratigraphic picks on wire-line geophysical logs of Upper Pennsylvanian–Lower Permian sedimentary rock were used to construct a 3-D model of the geologic subsurface as an aid for evaluating groundwater resources in Osage County. Quaternary alluvium and terraces along major streams and the Arkansas River are included in the geologic framework model. Data from the AEM survey were subjected to quality-control procedures, truncated at depth of investigation (DOI), and then used to build a 3-D electrical resistivity model making use of secondary and tertiary interpolation profiles between primary data profiles. The AEM data highlight westward-inclined resistivity gradients that parallel the shallow dip of bedrock strata; bodies have resistivity >30 ohm-meters, and extend as much as 10 kilometers (km) down the dip of host geologic units. Volume analysis and internal imaging of an integrated 3-D geology and electrical resistivity model give a proxy for likely aquifer units with large relative volumes of high resistivity: Quaternary alluvium, Elgin Sandstone Lentil in the upper part of the Vamoosa Group, Tallant Formation, and parts of a combined Wann-Iola-Chanute Formation. Less voluminous, high-resistivity bodies correspond to intervals in the lower part of the Vamoosa Group in the east-central part of the county and probable limestone intervals in the upper part of the Vanoss Group in the northwest part of the county. Northwestern and eastern troughs of potable water previously defined for central Osage County generally correspond to down-dip projections of high-resistivity bodies associated with the Elgin Sandstone Lentil of the Vamoosa Group and Tallant Formation, respectively.

Oklahoma↗
USGS2014

Active tensor magnetic gradiometer system final report for Project MM–1514

An interactive computer simulation program, based on physical models of system sensors, platform geometry, Earth environment, and spheroidal magnetically-permeable targets, was developed to generate synthetic magnetic field data from a conceptual tensor magnetic gradiometer system equipped with an active primary field generator. The system sensors emulate the prototype tensor magnetic gradiometer system (TMGS) developed under a separate contract for unexploded ordnance (UXO) detection and classification. Time-series data from different simulation scenarios were analyzed to recover physical dimensions of the target source. Helbig-Euler simulations were run with rectangular and rod-like source bodies to determine whether such a system could separate the induced component of the magnetization from the remanent component for each target. This report concludes with an engineering assessment of a practical system design.

Open-File Report↗
USGS2011

Recovery and reprocessing of legacy geophysical data from the archives of the State Company of Geology and Mining (GEOSURV) of Iraq and Iraq Petroleum Company (IPC)

Aeromagnetic data belonging to the State Company of Geology and Mining of Iraq (GEOSURV) have been recovered from magnetic tapes and early paper maps. In 1974 a national airborne survey was flown by the French firm Compagnie General de Geophysique (CGG). Following the survey the magnetic data were stored on magnetic tapes within an air conditioned archive run by GEOSURV. In 1990, the power supply to the archive was cut resulting in the present‐day poor condition of the tapes. Frontier Processing Company and the U.S. Geological Survey (USGS) have been able to recover over 99 percent of the original digital data from the CGG tapes. Preliminary reprocessing of the data yielded a total magnetic field anomaly map that reveals fine structures not evident in available published maps. Successful restoration of these comprehensive, high quality digital datasets obviates the need to resurvey the entire country, thereby saving considerable time and money. These data were delivered to GEOSURV in a standard format for further analysis and interpretation. A parallel effort by GETECH concentrated on recovering the legacy gravity data from the original field data sheets archived by IPC (Iraq Petroleum Company). These data have been compiled with more recent GEOSURV sponsored surveys thus allowing for the first time a comprehensive digital and unified national gravity database to be constructed with full principal facts. Figure 1 shows the final aeromagnetic and gravity data coverage of Iraq. The only part of Iraq lacking gravity and aeromagnetic data coverage is the mountainous areas of the Kurdish region of northeastern Iraq. Joint interpretation of the magnetic and gravity data will help guide future geophysical investigations by GEOSURV, whose ultimate aim is to discover economical mineral and energy resources.

SEG Technical Program Expanded Abstracts↗
USGS2011

Helicopter electromagnetic and magnetic geophysical survey data, Hunton anticline, south-central Oklahoma

This report is a digital data release for multiple geophysical surveys conducted in the Hunton anticline area of south-central Oklahoma. The helicopter electromagnetic and magnetic surveys were flown on March 16–17, 2007, in four areas of the Hunton anticline in south-central Oklahoma. The objective of this project is to improve the understanding of the geohydrologic framework of the Arbuckle-Simpson aquifer. The electromagnetic sensor for the helicopter electromagnetic survey consisted of six different transmitter-receiver orientations that measured the earth's electrical response at six distinct frequencies from approximately 500 Hertz to approximately 115,000 Hertz. The electromagnetic measurements were converted to electrical resistivity values, which were gridded and plotted on georeferenced maps. The map from each frequency represents a different depth of investigation for each area. The range of subsurface investigation is comparable to the depth of shallow groundwater. The four areas selected for the helicopter electromagnetic study, blocks A–D, have different geologic and hydrologic settings. Geophysical and hydrologic information from U.S. Geological Survey studies are being used by modelers and resource managers to develop groundwater resource plans for the Arbuckle-Simpson aquifer.

Oklahoma↗
USGS2008

Distribution of Igneous Rocks in Medina and Uvalde Counties, Texas, as Inferred from Aeromagnetic Data

A high-resolution aeromagnetic survey was flown in 2001 over Medina and Uvalde Counties, Texas, as part of a multi-disciplinary investigation of the geohydrologic framework of the Edwards aquifer in south-central Texas. The objective of the survey was to assist in mapping structural features that influence aquifer recharge and ground-water flow. The survey revealed hundreds of magnetic anomalies associated with igneous rocks that had previously been unmapped. This report presents an interpretation of the outcrops and subcrops of igneous rocks, based upon procedures of matched-filtering and potential field modeling.

Scientific Investigations Report↗
USGS2008

Three-Dimensional Geologic Model of Complex Fault Structures in the Upper Seco Creek Area, Medina and Uvalde Counties, South-Central Texas

This multimedia report shows and describes digital three-dimensional faulted geologic surfaces and volumes of the lithologic units of the Edwards aquifer in the upper Seco Creek area of Medina and Uvalde Counties in south-central Texas. This geologic framework model was produced using (1) geologic maps and interpretations of depositional environments and paleogeography; (2) lithologic descriptions, interpretations, and geophysical logs from 31 drill holes; (3) rock core and detailed lithologic descriptions from one drill hole; (4) helicopter electromagnetic geophysical data; and (5) known major and minor faults in the study area. These faults were used because of their individual and collective effects on the continuity of the aquifer-forming units in the Edwards Group. Data and information were compared and validated with each other and reflect the complex relationships of structures in the Seco Creek area of the Balcones fault zone. This geologic framework model can be used as a tool to visually explore and study geologic structures within the Seco Creek area of the Balcones fault zone and to show the connectivity of hydrologic units of high and low permeability between and across faults. The software can be used to display other data and information, such as drill-hole data, on this geologic framework model in three-dimensional space.

Scientific Investigations Report↗
USGS2005

Calibrating a tensor magnetic gradiometer using spin data

Scalar magnetic data are often acquired to discern characteristics of geologic source materials and buried objects. It is evident that a great deal can be done with scalar data, but there are significant advantages to direct measurement of the magnetic gradient tensor in applications with nearby sources, such as unexploded ordnance (UXO). To explore these advantages, we adapted a prototype tensor magnetic gradiometer system (TMGS) and successfully implemented a data-reduction procedure. One of several critical reduction issues is the precise determination of a large group of calibration coefficients for the sensors and sensor array. To resolve these coefficients, we devised a spin calibration method, after similar methods of calibrating space-based magnetometers (Snare, 2001). The spin calibration procedure consists of three parts: (1) collecting data by slowly revolving the sensor array in the Earth?s magnetic field, (2) deriving a comprehensive set of coefficients from the spin data, and (3) applying the coefficients to the survey data. To show that the TMGS functions as a tensor gradiometer, we conducted an experimental survey that verified that the reduction procedure was effective (Bracken and Brown, in press). Therefore, because it was an integral part of the reduction, it can be concluded that the spin calibration was correctly formulated with acceptably small errors.

Scientific Investigations Report↗
USGS2003

Helicopter electromagnetic and magnetic survey data and maps, Seco Creek area, Medina and Uvalde counties, Texas

A helicopter electromagnetic and magnetic (HEM) survey was completed of a 209 square kilometer (81 square miles) area of the central Edwards aquifer. This open-file report is a release of the airborne geophysical data and a summary of the hydrologic application. The survey area was centered on the Valdina Farms sinkhole along the Seco Creek drainage in western Medina County, Texas. Flight lines were flown north south with three east west tie lines to aid in leveling the magnetic data. Additional lines were flown on each side of the Seco and Little Seco Creek drainages. A five kilometer (4 mile) extension of 15 lines was flown north of the main survey block centered on Seco Creek. This digital data release contains the flight line data, grids, and maps of the HEM survey data. The Edwards aquifer in this area consists of three hydrologic zones: catchment, recharge, and confined. The Glen Rose Formation is exposed in the catchment area. The recharge zone is situated in the Balcones fault zone where the Devils River Group of the Edwards aquifer has been exposed by normal faults. The magnetic data is not discussed in depth here, but does have high amplitude closed anomalies caused by shallow igneous intrusives. The Woodard Cave Fault that separates the recharge and catchment zones is in places associated with a weak linear magnetic low. The HEM data has been processed to produce apparent resistivities for each of the six EM coil pairs and frequencies. Maps of the apparent resistivity for the five horizontal coil pairs show that the catchment, recharge, and confined zones all have numerous linear features that are likely caused by structures, many of which have not been mapped. The distribution of high resistivity areas reflects the lithologic differences within the Trinity and Edwards aquifers.

Texas↗
USGS2000

Imaging and modeling new VETEM data

In previously reported work (Wright and others, 2000) we found that the very early time electromagnetic (VETEM) prototype system produced data from which high resolution images of a buried former foundry site at the Denver Federal Center were made. The soil covering the site is about 30 mS/m conductivity, and is thus relatively unfavorable for ground penetrating radar (GPR) imaging. We have surveyed portions of this site again with new electric field dipole antennas and a new receiver designed for these antennas. Comparisons of the images produced using the loop antennas to those produced using the electric field dipole antennas illustrate that for this application the loop antennas produced more useful images. The larger man-made structures can be seen more clearly because they are not masked by dispersion and/or smaller scale variations as with the electric field dipole antennas. The VETEM system now contains an array of antennas with appropriate transmitters and receivers and can be operated as a low frequency time domain GPR or as a high frequency time domain electromagnetic (EM) system with several possible antenna spacings and polarizations. We plan to examine additional configurations. Numerical modeling of the perpendicular loop antenna configuration has been done and depth estimates produced. We conclude that, as with other GPR and time domain EM systems, the best choice of operating parameters depends on the application and the environment, but the inherent flexibility of the VETEM system allows a wide range of options.

Conference Paper↗