Geology ReportsSearch

Geology topics

David Soong

Publications and source records attributed to David Soong.

5 recordsLinked to original sources

FluOil—A tool for estimating the transport and deposition of oil-particle aggregates in rivers

The FluOil tool was developed to help with planning and early response for oil spills in rivers where subsurface oil-sediment interactions result in the formation of oil-particle aggregates (OPA). The turbulence and variable velocity associated with water flowing within a natural stream channel creates the conditions needed for an oil slick to break up into small droplets and mix in the water column, collide with sediment or organic detritus, and form OPA. This process is similar to what occurs due to wave action along a shoreline. The FluOil tool estimates how fast OPA travel downstream in rivers as well as when and where they may deposit. The FluOil tool relies on pre-existing channel hydraulic data along with user-specified OPA characteristics of size, settling velocity and critical shear stress to compute OPA transport. It is important to know where OPA are transported and accumulated for understanding potential impacts on drinking water intakes, burial of sensitive habitat beds, potential toxicity to benthic organisms, and prolonged sheening from resuspension and breakup. OPA tend to accumulate with fine-grained (silt and clay) sediment deposits (“mud” or “muck”) in backwater areas, oxbows, side channels, pools, and other slow-moving reaches of rivers during low flows. Deposited OPA can be resuspended during high flows, driving continued environmental impact concerns that may extend beyond typical oil spill response timelines.

Fact Sheet

Reproducing age variability in grass carp egg samples from the lower Sandusky River, Ohio, USA, using an egg-drift model

Invasive grass carp (Ctenopharyngodon idella) are currently reproducing in several tributaries to Lake Erie and threatening the Great Lakes ecosystem and fisheries. Grass carp are pelagic river spawners whose fertilized eggs drift downstream from the spawning site, developing as they drift. Variability in spawning time and location together with nonuniform velocities in natural rivers leads to egg age variability in field samples at downstream sampling sites. In this study, the Fluvial Egg Drift Simulator (FluEgg) model was used to simulate the transport of grass carp eggs collected in 12 samples at 9 sites in the lower Sandusky River (Ohio, USA) on July 12, 2017, to replicate the observed variability in egg-age distributions present in field samples. The variability in egg ages in virtual samples compare well to field samples. The most plausible explanations for differences between virtual and field samples are the existence of multiple spawning locations, including a spawning area approximately 8 kilometers upstream from the river mouth, and idealized flow fields derived from a one-dimensional hydraulic model. Despite multiple sources of uncertainty and the deficiency in prescribing detailed spawning activities in the simulations, the results validate the utility of FluEgg together with ichthyoplankton data to identify plausible spawning areas and interpret age variability in field samples. A comprehensive discussion of model limitations and ichthyoplankton sample interpretation provides guidance for those using drift models to inform management actions for control of invasive carp in North America and to protect and restore carp populations in their native range in Asia.

Ohio

Effect of uncertainty of discharge data on uncertainty of discharge simulation for the Lake Michigan Diversion, northeastern Illinois and northwestern Indiana

Simulation models of watershed hydrology (also referred to as “rainfall-runoff models”) are calibrated to the best available streamflow data, which are typically published discharge time series at the outlet of the watershed. Even after calibration, the model generally cannot replicate the published discharges because of simplifications of the physical system embedded in the model structure and uncertainties of the input data and of the estimated model parameters, which, although optimized for the given calibration data, remain uncertain. The input data errors are caused by uncertainties in the forcing data, such as precipitation and other climatological data, and in the published discharges used for calibration. In the numerical algorithms used for calibration, the published discharges are often assumed to be without error, but they are themselves uncertain, typically having been computed using ratings, which are models fitted to uncertain discharge measurements. In this study, uncertainty of published daily discharge data and how the discharge uncertainty is transmitted to the parameter values of the Hydrological Simulation Program–FORTRAN (HSPF) rainfall-runoff model and to the simulated discharge at both calibration and prediction locations were investigated for the Lake Michigan diversion in northeastern Illinois and northwestern Indiana. The HSPF model used in this study is used by the U.S. Army Corps of Engineers as part of quantifying the diversion of water from Lake Michigan by the State of Illinois. In this study, the model is calibrated jointly at two watersheds in the study area; the resulting model is considered the base model in this study. Seven other gaged watersheds in the study area are used for testing predictive simulations. A Bayesian rating curve estimation (BaRatin) approach, the BaRatin stage-period-discharge (SPD) method, was used to estimate the uncertainty of the published discharge from the calibration watersheds. To characterize the effect of the discharge uncertainty on parameter values, the HSPF model parameters were recalibrated to 17 nonrandomly selected pairs of discharge series from the BaRatin SPD analysis. To provide an indicator of the effect of parameter uncertainty to compare to the effect of discharge uncertainty, 1,000 parameter sets also were randomly generated from the estimated parameter covariance matrix of the base model. The recalibrated and random parameter sets were then used in HSPF simulations of discharge at the two calibration watersheds and at the seven prediction watersheds. Selected discharge summary statistics—the period-of-study (POS, water years 1997 to 2015) mean discharge, selected flow-duration curve (FDC) quantiles, and water year mean discharges—are used to characterize the variability between simulated and published discharge. A normalized variability index ( V N ) is used as a measure of the uncertainty of flow statistics arising from the uncertainty of the sources considered in this study. When this index is at least 1, the variability of the simulations is large enough to explain the median error between simulated and published values, although offsetting errors from other sources are also likely. When the index is appreciably less than 1, the variability of the simulations is clearly insufficient to explain the median error between simulated and published values. At the two calibration watersheds and for results of the two simulation sets considered together, the V N values ranged from 0.2 to 0.8 for POS mean discharge, from 0.3 to 0.6 in the median for a set of FDC quantiles, and from 0.1 to 0.2 in the median for water year mean discharges. These values indicate that substantial uncertainty remains unexplained. Even though two watersheds were used in calibration, that calibration was highly constrained because it was applied to the watersheds simultaneously and was subject to parameter regularization that constrained the adjustment of the parameters from their initial values. These constraints were applied to avoid overfitting to the calibration watersheds and thus to increase the likelihood that the resulting parameters would give accurate results at watersheds not used in the calibration, but they created a parameter transfer error in the calibration watershed results shown by the balancing of errors between the two watersheds. Additional remaining error sources include model structural error and meteorological forcing error to the degree that the calibration was unable to adjust the parameters to account for these errors. At the prediction watersheds, the corresponding V N values were almost always substantially lower than those values at the calibration watersheds. This result is expected because the prediction watersheds have additional uncertainty, including parameter transfer error. The work described in this report provides preliminary estimates of a limited range of sources of error in predicted discharge uncertainty. Future work would be beneficial to obtain a better statistical characterization of the effect of the uncertainty of calibration discharge series and to address additional sources of uncertainty, such as from precipitation input data used in calibration and prediction and from structural (model) errors.

Illinois, Indiana

FluOil: A novel tool for modeling the transport of oil-particle aggregates in inland waterways

Spilled oil in inland waterways can aggregate with mineral and organic particles to form oil-particle aggregates (OPAs). OPAs can be transported in suspension or deposited to the bed. Modeling the fate and transport of OPAs can provide useful information for making mitigation decisions. A novel open-source tool, FluOil, is developed to predict where OPAs may deposit and when they arrive in affected river/lake reaches by implementing the random walk particle tracking algorithm to represent the advection, diffusion, deposition, and resuspension of OPAs. The usability of FluOil is demonstrated with the 2010 Kalamazoo River oil spill case study. An unsteady hydrodynamic model simulates the river hydraulics and provides hydraulic data for use in FluOil. Settling velocity and critical shear stress for resuspension are the most important OPA properties concerning the transport and deposition of OPAs. Settling velocity determines the vertical distribution of OPAs and, thus, the travel speed, whereas critical shear stress determines where and when OPAs are deposited and resuspended.

Michigan

Using reverse-time egg transport analysis for predicting Asian Carp spawning grounds in the Illinois River

Identifying spawning grounds of Asian carp is important for determining the reproductive front of invasive populations. Ichthyoplankton monitoring along the Illinois Waterway (IWW) has provided information on abundances of Asian carp eggs in the IWW's navigation pools. Post-fertilization times derived from egg development stages and water temperatures can be used to estimate spawning times of Asian carp eggs, but estimating how far these eggs have drifted requires information on river hydraulics. A Fluvial Egg Drift Simulator (FluEgg) program was designed to predict the drift of Asian carp eggs in the riverine environment with egg growth considered. This paper presents a reverse-time particle tracking (RTPT) algorithm for back-casting the spawning location of eggs from their collection site. The RTPT algorithm was implemented as a module in FluEgg. The new version of FluEgg was coupled with an unsteady hydrodynamic model of the IWW to predict the spawning locations for 530 eggs that were collected in June 2015. The results indicate that tailwater sections below the Locks and Dams (L&Ds) in each navigation pool appear to be preferred spawning locations for Silver Carp. From the data analyzed, the most upstream spawning location for the June 2015 spawning period was in the upper Marseilles navigation pool, downstream of the Dresden Island L&D. The RTPT algorithm can efficiently estimate spawning locations for multiple egg samples.

Illinois