Geology topics

David Mayer

Publications and source records attributed to David Mayer.

9 recordsLinked to original sources

USGS2024

Current status of the community sensor model standard for the generation of planetary digital terrain models

The creation of accurate elevation models (topography) from stereo images are critical for a large variety of geospatial activities, including the production of digital orthomosaics, change detection, landing site analysis, geologic mapping, rover traverse planning, and spectral analysis. The United Stated Geological Survey, Astrogeology Science Center, continues to transition the supported planetary sensor models to the Community Sensor Model (CSM) standard. This paper describes the current state of use for this photogrammetric standard, supported sensor model types, and qualitatively compares derived topography between SOCET SET and SOCET GXP ( ® BAE Systems) using HiRISE stereo images of Mars. Our transition to the CSM standard will ensure an uninterrupted capability to make these valuable products for Mars and many other extraterrestrial planets and moons.

Remote Sensing↗

USGS2022

Comparison of Digital Terrain Models from two photoclinometry methods

We evaluate the horizontal resolution and vertical precision for digital topographic models (DTMs) of the Moon derived from image radiance information, a process known as photoclinometry (PC) or shape-from-shading (SfS). We use the implementations in two available planetary image processing software systems, single image PC in the U.S. Geological Survey Integrated Software for Imagers and Spectrometers (ISIS) system, and multi-image SfS in the Ames Stereo Pipeline (ASP), and test results obtained with and without use of a starting solution from stereo, with single and multiple images, and for varying illumination conditions. To obtain the higher quality reference DTMs against which the products can be evaluated, we derived DTMs by stereoanalysis of Lunar Reconnaissance Orbiter Narrow-Angle Camera (LROC NAC) images at their native pixel spacing of ∼0.5 m, then produced a 16-m/post stereo DTM from images downsampled to 4 m/pixel and refined it with images at 16 m/pixel. When used with a single image, both algorithms improved resolution (by a factor of 1.4 for PC and 2.4 for SfS compared to stereo). An albedo map produced in ISIS by ratioing the image to a simulation based on the stereo DTM was well correlated with one output by SfS. The albedo correction was crucial for PC with ∼60° incidence but not at ∼80°. DTMs produced by PC and SfS without a starting stereo DTM had larger errors but good detail, and could be useful for many applications. In SfS, it was necessary to increase smoothing to get a usable DTM when the weighting on an a priori DTM was reduced. Multi-image SfS including modeling of spatially varying albedo reduced vertical errors by factors of 1.5 or more compared to single-image SfS.

International Archives of the Photogrammetry, Remo↗

USGS2021

How well do we know Europa’s topography? An evaluation of the variability in digital terrain models of Europa.

Jupiter’s moon Europa harbors one of the most likely environments for extant extraterrestrial life. Determining whether Europa is truly habitable requires understanding the structure and thickness of its ice shell, including the existence of perched water or brines. Stereo-derived topography from images acquired by NASA Galileo’s Solid State Imager (SSI) of Europa are often used as a constraint on ice shell structure and heat flow, but the uncertainty in such topography has, to date, not been rigorously assessed. To evaluate the current uncertainty in Europa’s topography we generated and compared digital terrain models (DTMs) of Europa from SSI images using both the open-source Ames Stereo Pipeline (ASP) software and the commercial SOCET SET ® software. After first describing the criteria for assessing stereo quality in detail, we qualitatively and quantitatively describe both the horizontal resolution and vertical precision of the DTMs. We find that the horizontal resolution of the SOCET SET ® DTMs is typically 8–11× the root mean square (RMS) pixel scale of the images, whereas the resolution of the ASP DTMs is 9–13× the maximum pixel scale of the images. We calculate the RMS difference between the ASP and SOCET SET ® DTMs as a proxy for the expected vertical precision (EP), which is a function of the matching accuracy and stereo geometry. We consistently find that the matching accuracy is ~0.5 pixels, which is larger than well-established “rules of thumb” that state that the matching accuracy is 0.2–0.3 pixels. The true EP is therefore ~1.7× larger than might otherwise be assumed. In most cases, DTM errors are approximately normally distributed, and errors that are several times the derived EP occur as expected. However, in two DTMs, larger errors (differences) occur and correlate with real topography. These differences primarily result from manual editing of the SOCET SET ® DTMs. The product of the DTM error and the resolution is typically 4–8 pixel 2 if calculated using the RMS image scale for SOCET SET ® DTMs and the maximum images scale for the ASP DTMs, which is consistent with recent work using martian data sets and suggests that the relationship applies more broadly. We evaluate how ASP parameters affect DTM quality and find that using a smaller subpixel refinement kernel results in DTMs with smaller (better) resolution but, in some cases, larger gaps, which are sometimes reduced by increasing the size of the correlation kernel. We conclude that users of ASP should always systematically evaluate the choice of parameters for a given dataset.

Remote Sensing↗

USGS2021

Evaluating stereo digital terrain model quality at Mars Rover Landing Sites with HRSC, CTX, and HiRISE Images

We have used high-resolution digital terrain models (DTMs) of two rover landing sites based on mosaicked images from the High-Resolution Imaging Science Experiment (HiRISE) camera as a reference to evaluate DTMs based on High-Resolution Stereo Camera (HRSC) and Context Camera (CTX) images. The Next-Generation Automatic Terrain Extraction (NGATE) matcher in the SOCET SET and GXP® commercial photogrammetric systems produces DTMs with good (small) horizontal resolution but large vertical error. Somewhat surprisingly, results for NGATE are terrain dependent, with poorer resolution and smaller errors on smoother surfaces. Multiple approaches to smoothing the NGATE DTMs give similar tradeoffs between resolution and error; a 5 × 5 lowpass filter is near optimal in terms of both combined resolution-error performance and local slope estimation. Smoothing with an area-based matcher, the standard processing for U.S. Geological Survey planetary DTMs, yields similar errors to the 5 × 5 filter at slightly worse resolution. DTMs from the HRSC team processing pipeline fall within this same trade space but are less sensitive to terrain roughness. DTMs produced with the Ames Stereo Pipeline also fall in this space at resolutions intermediate between NGATE and the team pipeline. Considered individually, resolution and error each varied by approximately a factor of 2. Matching errors were 0.2–0.5 pixels but most results fell in the 0.2–0.3 pixel range that has been stated as a rule of thumb in multiple prior studies. Horizontal resolutions of 10–20 image pixels were found, consistently greater than the 3–5 pixel spacing generally used for stereo DTM production. Resolution and precision were inversely correlated; their product varied by ≤20% (4–5 pixels squared). Refinement of the stereo DTM by photoclinometry can yield quantitative improvement in resolution (more than a factor of 2), provided that albedo variations over distances smaller than the stereo DTM resolution are not too severe. We offer specific guidance for both producers and users of planetary stereo DTMs, based on our results.

Remote Sensing↗

USGS2021

Further adventures in Mars DTM quality: Smoothing errors, sharpening details

We have used high-precision, high-resolution digital terrain models (DTMs) of the NASA Mars Science Laboratory (MSL) and Mars 2020 rover landing sites based on mosaicked images from the Mars Reconnaissance Orbiter High Resolution Imaging Science Experiment (MRO HiRISE) camera as a reference data set to evaluate DTMs based on Mars Express High Resolution Stereo Camera (MEX HRSC) images. The Next Generation Automatic Terrain Extraction (NGATE) matcher in the SOCET SET/GXP † commercial photogrammetric system produces DTMs with relatively good (small) horizontal resolution but high error, and results are terrain dependent, with poorer resolution and smaller errors on smoother surfaces. Multiple approaches to smoothing the NGATE DTMs give very similar tradeoffs between resolution and error. Smoothing the NGATE DTMs with a single pass of an area-based matcher, which has been the standard approach to generating planetary DTMs at the U.S. Geological Survey (USGS) to date is probably near-optimal in terms of both combined resolution-error performance and local slope estimation, but smoothing with a 5x5 lowpass filter performs as well or better. DTMs from the HRSC team processing pipeline fall within this same trade space but are less sensitive to terrain roughness. DTMs produced with the Ames Stereo Pipeline also fall in this space at resolutions intermediate between NGATE and the team pipeline. Although DTM resolution and error each vary by a factor of two, their product is much more consistent, varying by <20% across multiple image sets and matching algorithms. Refinement of the stereo DTM by photoclinometry can yield significant quantitative improvement in resolution and some improvement in error (improving their product by as much as a factor of two), provided that albedo variations over distances smaller than the stereo DTM resolution are not too severe.

Conference Paper↗

USGS2020

Evaluating stereo DTM quality at Jezero Crater, Mars with HRSC, CTX, and HiRISE images

We have used a high-precision, high-resolution digital terrain model (DTM) of the NASA Mars 2020 rover Perseverance landing site in Jezero crater based on mosaicked images from the Mars Reconnaissance Orbiter High Resolution Imaging Science Experiment (MRO HiRISE) camera as a reference dataset to evaluate DTMs based on Mars Express High Resolution Stereo Camera (MEX HRSC) and MRO Context camera (CTX) images. Results are consistent with our earlier HRSC-HiRISE comparisons at the Mars Science Laboratory (MSL) Curiosity landing site in Gale crater, confirming that those results were not compromised by the small area compared and potential problems with spatial registration. Specifically, height errors are on the order of half a pixel and correspond to an image matching error of 0.2–0.3 pixel but estimates of horizontal resolution are 10–20 pixels. Products from the HRSC team pipeline at DLR are smoother but more precise vertically than those produced by using the commercial stereo package SOCET SET®. The DLR products are also homogenous in quality, whereas the SOCET products are less smoothed and have higher errors in rougher terrain. Despite this weak variation, our results are consistent with a rule of thumb of 0.2–0.3 pixel matching precision based on many prior studies. Horizontal resolution is significantly coarser than the DTM ground sample distance (GSD), which is typically 3–5 pixels.

Conference Paper↗

USGS2020

A global shape model for Saturn's moon Enceladus from a dense photogrammetric control network

A planetary bodys global shape provides both insight into its geologic evolution, and a key element of any Planetary Spatial Data Infrastructure (PSDI). NASAs Cassini mission to Saturn acquired more than 600 moderate- to high-resolution images (< 500 m/pixel) of the small, geologically active moon Enceladus. The moons internal global ocean and intriguing geology mark it as a candidate for future exploration and motivates the development of a PSDI. Recently, Bland et al. (2018) provided two foundational elements of this PSDI: geodetic control and orthoimages. To provide the third foundational data set we generate a new shape model for Enceladus from Cassini images and a dense photogrammetric control network (nearly 1 million tie points) using the United States Geological Surveys Integrated Software for Imagers and Spectrometers (ISIS) and the Ames Stereo Pipeline (ASP). The new shape model is near-global in extent and gridded to 2.2 km/pixel, ~50 times better resolution than previous global models. Our calculated triaxial shape, rotation rate, and pole orientation for Enceladus is consistent with current IAU values to within the error; however, we determined a new prime meridian offset (Wo) of 7.063o. We calculate Enceladus long-wavelength topography by subtracting the best-fit triaxial ellipsoid from our shape model. The result is comparable to previous global models but can resolve topographic features as small as 5-7 km across in certain areas. To evaluate the spatially varying quality of the model we calculate the point density (variable from 5 to more than 50 per pixel), normalized median absolute deviation of the points within each pixel (typically less than 100 m), and the minimum expected vertical precision of each point (ranging from 2 km to 29 m).

Conference Paper↗

USGS2019

Formation of pedestalled, relict lakes on the McMurdo Ice Shelf, Antarctica

Surface debris covers much of the western portion of the McMurdo Ice Shelf and has a strong influence on the local surface albedo and energy balance. Differential ablation between debris-covered and debris-free areas creates an unusual heterogeneous surface of topographically low, high-ablation, and topographically raised (‘pedestalled’), low-ablation areas. Analysis of Landsat and MODIS satellite imagery from 1999 to 2018, alongside field observations from the 2016/2017 austral summer, shows that pedestalled relict lakes (‘pedestals’) form when an active surface meltwater lake that develops in the summer, freezes-over in winter, resulting in the lake-bottom debris being masked by a high-albedo, superimposed, ice surface. If this ice surface fails to melt during a subsequent melt season, it experiences reduced surface ablation relative to the surrounding debris-covered areas of the ice shelf. We propose that this differential ablation, and resultant hydrostatic and flexural readjustments of the ice shelf, causes the former supraglacial lake surface to become increasingly pedestalled above the lower topography of the surrounding ice shelf. Consequently, meltwater streams cannot flow onto these pedestalled features, and instead divert around them. We suggest that the development of pedestals has a significant influence on the surface-energy balance, hydrology and flexure of the ice shelf.

Journal of Glaciology↗

USGS2019

Persistence of intense, climate-driven runoff late in Mars history

Mars is dry today, but numerous precipitation-fed paleo-rivers are found across the planet’s surface. These rivers’ existence is a challenge to models of planetary climate evolution. We report results indicating that, for a given catchment area, rivers on Mars were wider than rivers on Earth today. We use the scale (width and wavelength) of Mars paleo-rivers as a proxy for past runoff production. Using multiple methods, we infer that intense runoff production of >(3–20) kg/m 2 per day persisted until <3 billion years (Ga) ago and probably <1 Ga ago, and was globally distributed. Therefore, the intense runoff production inferred from the results of the Mars Science Laboratory rover was not a short-lived or local anomaly. Rather, precipitation-fed runoff production was globally distributed, was intense, and persisted intermittently over >1 Ga. Our improved history of Mars’ river runoff places new constraints on the unknown mechanism that caused wet climates on Mars.

Science Advances↗