Geology topics

David Fee

Publications and source records attributed to David Fee.

51 records · Page 3Linked to original sources

USGS2019

Infrasound from giant bubbles during explosive submarine eruptions

Shallow submarine volcanoes pose unique scientific and monitoring challenges. The interaction between water and magma can create violent explosions just below the surface, but the inaccessibility of submerged volcanoes means they are typically not instrumented. This both increases the risk to marine and aviation traffic and leaves the underlying eruption physics poorly understood. Here we use low-frequency sound in the atmosphere (infrasound) to examine the source mechanics of shallow submarine explosions from Bogoslof volcano, Alaska. We show that the infrasound originates from the oscillation and rupture of magmatic gas bubbles that initially formed from submerged vents, but that grew and burst above sea level. We model the low-frequency signals as overpressurized gas bubbles that grow near the water–air interface, which require bubble radii of 50–220 m. Bubbles of this size and larger have been described in explosive subaqueous eruptions for more than a century, but we present a unique geophysical record of this phenomenon. We propose that the dominant role of seawater during the effusion of gas-rich magma into shallow water is to repeatedly produce a gas-tight seal near the vent. This resealing mechanism leads to sequences of violent explosions and the release of large, bubble-forming volumes of gas—activity we describe as hydrovulcanian.

Alaska↗

USGS2019

AVO-G2S: A modified, open-source Ground-to-Space atmospheric specification for infrasound modeling

To facilitate infrasound propagation studies, we present AVO-G2S, an open-source, Ground-to-Space model which provides temperature and wind specifications from the surface to an altitude of 225 km. This model provides a means of smoothly characterizing atmospheric conditions using multiple numerical weather prediction forecast and reanalysis products, along with upper-atmospheric empirical models. Regional atmospheric reconstructions only require a limited domain and can utilize high-resolution numerical weather prediction forecasts typically provided on a projected grid. The use of a projected grid allows for faster spectral transform libraries to be employed. The AVO-G2S software can also provide global reconstructions that rely on global numerical weather prediction products and spherical harmonic decompositions. AVO-G2S is inspired by a global Ground-to-Space model developed by the Naval Research Laboratory, and relies on their empirical descriptions of upper-atmospheric conditions. Alaska Volcano Observatory has implemented this model for near-real-time infrasound monitoring of volcanic eruptions and historical research projects.

Computers & Geosciences↗

USGS2019

Application of an updated atmospheric model to explore volcano infrasound propagation and detection in Alaska

Winds and temperature gradients greatly affect the long-range propagation of infrasound . The spatio-temporal variability of these parameters must therefore be accurately characterized to correctly interpret recorded infrasound at long distances, specifically to differentiate between source and propagation effects. Here we present the first results of an open source reanalysis model, termed Alaska Volcano Observatory Ground-to-Space (AVO-G2S), constructed to accurately characterize the atmosphere and model long-range infrasound propagation from volcanic eruptions in Alaska. We select a number of case studies to examine recent eruptions of Alaskan volcanoes whose ash emissions posed a threat to air traffic, including the two most recent eruptions of Pavlof Volcano and two typical explosions from Cleveland Volcano. Strong tropospheric ducting and low noise at the station during the 21 July 2015 explosion of Cleveland Volcano led to an automated detection of the explosion at an infrasound array 992 km away, whereas low signal-to-noise ratio for the 6 November 2014 Cleveland Volcano explosion helps explain the non-detection in real-time of a predicted strong stratospheric arrival. For the November 2014 Pavlof eruption, discrepancies between local seismic data and a distal infrasound array 460 km away cannot be solely explained by changes in atmospheric conditions, though some features of the complex propagation predictions follow the trends in long-range infrasound signals. The most recent eruption of Pavlof Volcano in March 2016 shows minimal changes in propagation conditions throughout the eruption and therefore indicates that the signals detected at long-range primarily reflect source processes. These results show how detailed examination of the acoustic propagation conditions provides insight into detection capability and eruption dynamics. Future work will implement AVO-G2S and high-resolution long-range infrasound propagation modeling in real-time for Alaskan volcanoes of interest.

Alaska↗

USGS2018

Short-term forecasting and detection of explosions during the 2016–2017 eruption of Bogoslof volcano, Alaska

We describe a multidisciplinary approach to forecast, rapidly detect, and characterize explosive events during the 2016–2017 eruption of Bogoslof volcano, a back-arc shallow submarine volcano in Alaska’s Aleutian arc. The eruptive sequence began in December 2016 and included about 70 discrete explosive events. Because the volcano has no local monitoring stations, we used distant stations on the nearest volcanoes, Okmok (54 km) and Makushin (72 km), combined with regional infrasound sensors and lightning detection from the Worldwide Lightning Location Network (WWLLN). Pre-eruptive seismicity was detected for 12 events during the first half of the eruption; for all other events co-eruptive signals allowed for detection only. Monitoring of activity used a combination of scheduled checks combined with automated alarms. Alarms triggered on real-time data included real-time seismic amplitude measurement (RSAM); infrasound from several arrays, the closest being on Okmok; and lightning strokes detected from WWLLN within a 20-km radius of the volcano. During periods of unrest, a multidisciplinary response team of four people fulfilled specific roles to evaluate geophysical and remote-sensing data, run event-specific ash-cloud dispersion models, ensure interagency coordination, and develop and distribute of formalized warning products. Using this approach, for events that produced ash clouds ≥7.5 km above sea level, Alaska Volcano Observatory (AVO) called emergency response partners 15 min, and issued written notices 30 min, after event onset (mean times). Factors that affect timeliness of written warnings include event size and number of data streams available; bigger events and more data both decrease uncertainty and allow for faster warnings. In remote areas where airborne ash is the primary hazard, the approach used at Bogoslof is an effective strategy for hazard mitigation.

Alaska↗

USGS2018

Infrasound signal detection and back azimuth estimation using ground-coupled airwaves on a seismo-acoustic sensor pair

We present a new infrasonic signal detection and back azimuth determination technique that requires just one microphone and one three-component seismometer. Ground-coupled airwaves (GCAs) occur when an incident atmospheric acoustic wave impinges on the ground surface and is partially transmitted as a seismic wave. GCAs are commonly detected hundreds of kilometers away on seismic networks and are observed to have retrograde particle motion. Horizontally propagating acoustic waves and GCAs have previously been observed on collocated infrasound and seismic sensor pairs as coherent with a 90° phase difference. If the sensors are spatially separated, an additional propagation-induced phase shift is present. The additional phase shift depends on the direction from which the acoustic wave arrives, as each back azimuth has a different apparent distance between the sensors. We use the additional phase shift, the coherence, and the characteristic particle motion on the three-component seismometer to determine GCA arrivals and their unique back azimuth. We test this technique with synthetic seismo-acoustic data generated by a coupled Earth-atmosphere 3-D finite difference code, as well as three seismo-acoustic data sets from Mount St. Helens, Mount Cleveland, and Mount Pagan volcanoes. Results from our technique compare favorably with traditional infrasound array processing and provide robust GCA detection and back azimuth determination. Assuming adequate station spacing and sampling, our technique provides a new and robust method to detect infrasonic signals and determine their back azimuth, and may be of practical benefit where resources are limited and large sensor networks or arrays are not feasible.

JGR Solid Earth↗

USGS2018

Local, regional, and remote seismo-acoustic observations of the April 2015 VEI 4 eruption of Calbuco volcano, Chile

The two major explosive phases of the 22-23 April 2015 eruption of Calbuco volcano, Chile produced powerful seismicity and infrasound. The eruption was recorded on seismo-acoustic stations out to 1,540 km and on 5 stations (IS02, IS08, IS09, IS27, and IS49) of the International Monitoring System (IMS) infrasound network at distances from 1,525 to 5,122 km. The remote IMS infrasound stations provide an accurate explosion chronology consistent with the regional and local seismo-acoustic data, and with previous studies of lightning and plume observations. We use the IMS network to detect and locate the eruption signals using a brute-force, grid search, cross-bearings approach. After incorporating azimuth deviation corrections from stratospheric cross-winds using 3D ray-tracing, the estimated source location is 172 km from true. This case study highlights the significant capability of the IMS infrasound network to provide automated detection, characterization, and timing estimates of global explosive volcanic activity. Augmenting the IMS with regional seismo-acoustic networks will dramatically enhance volcanic signal detection, reduce latency, and improve discrimination capability.

Calbuco volcano↗

USGS2018

Volcanic thunder from explosive eruptions at Bogoslof volcano, Alaska

Lightning often occurs during ash-producing eruptive activity, and its detection is now being used in volcano monitoring for rapid alerts. We report on infrasonic and sonic recordings of the related, but previously undocumented, phenomenon of volcanic thunder. We observe volcanic thunder during the waning stages of two explosive eruptions at Bogoslof volcano, Alaska, on a microphone array located 60 km away. Thunder signals arrive from a different direction than coeruptive infrasound generated at the vent following an eruption on 10 June 2017, consistent with locations from lightning networks. For the 8 March 2017 eruption, arrival times and amplitudes of high-frequency thunder signals correlate well with the timing and strength of lightning detections. In both cases, the thunder is associated with lightning that continues after significant eruptive activity has ended. Infrasonic and sonic observations of volcanic thunder offer a new avenue for studying electrification processes in volcanic plumes.

Alaska↗

USGS2017

Volcanic tremor and plume height hysteresis from Pavlof Volcano, Alaska

The March 2016 eruption of Pavlof Volcano, Alaska produced ash plumes that canceled over 100 flights in North America. The eruption produced strong tremor recorded by seismic and remote low-frequency acoustic (infrasound) stations, including the EarthScope Transportable Array. The relationship between the tremor amplitudes and plume height changes considerably between the waxing and waning portions of the eruption. Similar hysteresis has been observed between seismic river noise and discharge during storms, suggesting flow and erosional processes in both rivers and volcanoes can produce irreversible structural changes detectable in geophysical data. We propose that the time-varying relationship at Pavlof arose from changes in the tremor source related to volcanic vent erosion. This relationship may improve estimates of volcanic emissions and characterization of eruption size and intensity.

Alaska↗

USGS2016

Seismic envelope-based detection and location of ground-coupled airwaves from volcanoes in Alaska

Volcanic explosions and other infrasonic sources frequently produce acoustic waves that are recorded by seismometers. Here we explore multiple techniques to detect, locate, and characterize ground‐coupled airwaves (GCA) on volcano seismic networks in Alaska. GCA waveforms are typically incoherent between stations, thus we use envelope‐based techniques in our analyses. For distant sources and planar waves, we use f ‐ k beamforming to estimate back azimuth and trace velocity parameters. For spherical waves originating within the network, we use two related time difference of arrival (TDOA) methods to detect and localize the source. We investigate a modified envelope function to enhance the signal‐to‐noise ratio and emphasize both high energies and energy contrasts within a spectrogram. We apply these methods to recent eruptions from Cleveland, Veniaminof, and Pavlof Volcanoes, Alaska. Array processing of GCA from Cleveland Volcano on 4 May 2013 produces robust detection and wave characterization. Our modified envelopes substantially improve the short‐term average/long‐term average ratios, enhancing explosion detection. We detect GCA within both the Veniaminof and Pavlof networks from the 2007 and 2013–2014 activity, indicating repeated volcanic explosions. Event clustering and forward modeling suggests that high‐resolution localization is possible for GCA on typical volcano seismic networks. These results indicate that GCA can be used to help detect, locate, characterize, and monitor volcanic eruptions, particularly in difficult‐to‐monitor regions. We have implemented these GCA detection algorithms into our operational volcano‐monitoring algorithms at the Alaska Volcano Observatory.

Alaska↗

USGS2014

The 2013 eruption of Pavlof Volcano, Alaska: a spatter eruption at an ice- and snow-clad volcano

The 2013 eruption of Pavlof Volcano, Alaska began on 13 May and ended 49 days later on 1 July. The eruption was characterized by persistent lava fountaining from a vent just north of the summit, intermittent strombolian explosions, and ash, gas, and aerosol plumes that reached as high as 8 km above sea level and on several occasions extended as much as 500 km downwind of the volcano. During the first several days of the eruption, accumulations of spatter near the vent periodically collapsed to form small pyroclastic avalanches that eroded and melted snow and ice to form lahars on the lower north flank of the volcano. Continued lava fountaining led to the production of agglutinate lava flows that extended to the base of the volcano, about 3–4 km beyond the vent. The generation of fountain-fed lava flows was a dominant process during the 2013 eruption; however, episodic collapse of spatter accumulations and formation of hot spatter-rich granular avalanches was a more efficient process for melting snow and ice and initiating lahars. The lahars and ash plumes generated during the eruption did not pose any serious hazards for the area. However, numerous local airline flights were cancelled or rerouted, and trace amounts of ash fall occurred at all of the local communities surrounding the volcano, including Cold Bay, Nelson Lagoon, Sand Point, and King Cove.

Alaska↗

USGS2014

Distinguishing high surf from volcanic long-period earthquakes

Repeating long-period (LP) earthquakes are observed at active volcanoes worldwide and are typically attributed to unsteady pressure fluctuations associated with fluid migration through the volcanic plumbing system. Nonvolcanic sources of LP signals include ice movement and glacial outburst floods, and the waveform characteristics and frequency content of these events often make them difficult to distinguish from volcanic LP events. We analyze seismic and infrasound data from an LP swarm recorded at Pagan volcano on 12–14 October 2013 and compare the results to ocean wave data from a nearby buoy. We demonstrate that although the events show strong similarity to volcanic LP signals, the events are not volcanic but due to intense surf generated by a passing typhoon. Seismo-acoustic methods allow for rapid distinction of volcanic LP signals from those generated by large surf and other sources, a critical task for volcano monitoring.

Pagan Volcano↗

USGS2013

Evaluation of Redoubt Volcano's sulfur dioxide emissions by the Ozone Monitoring Instrument

The 2009 eruption of Redoubt Volcano, Alaska, provided a rare opportunity to compare satellite measurements of sulfur dioxide (SO 2 ) by the Ozone Monitoring Instrument (OMI) with airborne SO 2 measurements by the Alaska Volcano Observatory (AVO). Herein we: (1) compare OMI and airborne SO 2 column density values for Redoubt's tropospheric plume, (2) calculate daily SO 2 masses from Mount Redoubt for the first three months of the eruption, (3) develop simple methods to convert daily measured SO 2 masses into emission rates to allow satellite data to be directly integrated with the airborne SO 2 emissions dataset, (4) calculate cumulative SO 2 emissions from the eruption, and (5) evaluate OMI as a monitoring tool for high-latitude degassing volcanoes. A linear correlation (R 2 ~ 0.75) is observed between OMI and airborne SO 2 column densities. OMI daily SO 2 masses for the sample period ranged from ~ 60.1 kt on 24 March to below detection limit, with an average daily SO 2 mass of ~ 6.7 kt. The highest SO 2 emissions were observed during the initial part of the explosive phase and the emissions exhibited an overall decreasing trend with time. OMI SO 2 emission rates were derived using three methods and compared to airborne measurements. This comparison yields a linear correlation (R 2 ~ 0.82) with OMI-derived emission rates consistently lower than airborne measurements. The comparison results suggest that OMI's detection limit for high latitude, springtime conditions varies from ~ 2000 to 4000 t/d. Cumulative SO 2 masses calculated from daily OMI data for the sample period are estimated to range from 542 to 615 kt, with approximately half of this SO 2 produced during the explosive phase of the eruption. These cumulative masses are similar in magnitude to those estimated for the 1989–90 Redoubt eruption. Strong correlations between daily OMI SO 2 mass and both tephra mass and acoustic energy during the explosive phase of the eruption suggest that OMI data may be used to infer relative eruption size and explosivity. Further, when used in conjunction with complementary datasets, OMI daily SO 2 masses may be used to help distinguish explosive from effusive activity and identify changes in lava extrusion rates. The results of this study suggest that OMI is a useful volcano monitoring tool to complement airborne measurements, capture explosive SO 2 emissions, and provide high temporal resolution SO 2 emissions data that can be used with interdisciplinary datasets to illuminate volcanic processes.

Alaska↗

USGS2012

Detecting hidden volcanic explosions from Mt. Cleveland Volcano, Alaska with infrasound and ground-couples airwaves

In Alaska, where many active volcanoes exist without ground-based instrumentation, the use of techniques suitable for distant monitoring is pivotal. In this study we report regional-scale seismic and infrasound observations of volcanic activity at Mt. Cleveland between December 2011 and August 2012. During this period, twenty explosions were detected by infrasound sensors as far away as 1827 km from the active vent, and ground-coupled acoustic waves were recorded at seismic stations across the Aleutian Arc. Several events resulting from the explosive disruption of small lava domes within the summit crater were confirmed by analysis of satellite remote sensing data. However, many explosions eluded initial, automated, analyses of satellite data due to poor weather conditions. Infrasound and seismic monitoring provided effective means for detecting these hidden events. We present results from the implementation of automatic infrasound and seismo-acoustic eruption detection algorithms, and review the challenges of real-time volcano monitoring operations in remote regions. We also model acoustic propagation in the Northern Pacific, showing how tropospheric ducting effects allow infrasound to travel long distances across the Aleutian Arc. The successful results of our investigation provide motivation for expanded efforts in infrasound monitoring across the Aleutians and contributes to our knowledge of the number and style of vulcanian eruptions at Mt. Cleveland.

Alaska↗

USGS2011

Shallow degassing events as a trigger for very-long-period seismicity at Kilauea Volcano, Hawaii

The first eruptive activity at Kīlauea Volcano’s summit in 25 years began in March 2008 with the opening of a 35-m-wide vent in Halema‘uma‘u crater. The new activity has produced prominent very-long-period (VLP) signals corresponding with two new behaviors: episodic tremor bursts and small explosive events, both of which represent degassing events from the top of the lava column. Previous work has shown that VLP seismicity has long been present at Kīlauea’s summit, and is sourced approximately 1 km below Halema‘uma‘u. By integrating video observations, infrasound and seismic data, we show that the onset of the large VLP signals occurs within several seconds of the onset of the degassing events. This timing indicates that the VLP is caused by forces—sourced at or very near the lava free surface due to degassing—transmitted down the magma column and coupling to the surrounding rock at 1 km depth.

Hawaii↗

USGS2010

Infrasonic harmonic tremor and degassing bursts from Halema'uma'u Crater, Kilauea Volcano, Hawaii

The formation, evolution, collapse, and subsequent resurrection of a vent within Halema'uma'u Crater, Kilauea Volcano, produced energetic and varied degassing signals recorded by a nearby infrasound array between 2008 and early 2009. After 25 years of quiescence, a vent-clearing explosive burst on 19 March 2008 produced a clear, complex acoustic signal. Near-continuous harmonic infrasonic tremor followed this burst until 4 December 2008, when a period of decreased degassing occurred. The tremor spectra suggest volume oscillation and reverberation of a shallow gas-filled cavity beneath the vent. The dominant tremor peak can be sustained through Helmholtz oscillations of the cavity, while the secondary tremor peak and overtones are interpreted assuming acoustic resonance. The dominant tremor frequency matches the oscillation frequency of the gas emanating from the vent observed by video. Tremor spectra and power are also correlated with cavity geometry and dynamics, with the cavity depth estimated at ~219 m and volume ~3 x 10 6 m 3 in November 2008. Over 21 varied degassing bursts were observed with extended burst durations and frequency content consistent with a transient release of gas exciting the cavity into resonance. Correlation of infrasound with seismicity suggests an open system connecting the atmosphere to the seismic excitation process at depth. Numerous degassing bursts produced very long period (0.03-0.1 Hz) infrasound, the first recorded at Kilauea, indicative of long-duration atmospheric accelerations. Kilauea infrasound appears controlled by the exsolution of gas from the magma, and the interaction of this gas with the conduits and cavities confining it.

Hawai'i↗