Geology Reports⌕ Search

Geology topics

D. M. Rubin

Publications and source records attributed to D. M. Rubin.

At least 19 recordsLinked to original sources
USGS2022

Orbital and in-situ investigation of periodic bedrock ridges in Glen Torridon, Gale Crater, Mars

Wind has been the dominant agent of landscape modification on Mars for the past ~3 billion years. Among the diversity of features formed by aeolian abrasion on the surface of Mars are periodic bedrock ridges (PBRs), a relatively recently recognized class of erosional bedforms on Mars for which Earth analogues are rare. Gale crater, the field site for NASA’s Mars Science Laboratory Curiosity rover since it landed there in 2012, contains a diverse and extensive record of aeolian deposition and erosion. This study focuses on a series of periodic, linear bedrock ridges that occur within the Fe/Mg-smectite clay-bearing Glen Torridon region of Aeolis Mons (informally Mount Sharp). During Curiosity’s exploration of the Glen Torridon region between sols ~2300-3080, the rover drove through this field of ridges, providing the first opportunity for the in situ observation of these enigmatic erosional features. This study characterizes the Glen Torridon ridges using orbiter and rover data to determine their morphology, spatial distribution, compositional and material properties, and association with other aeolian features in the area. Based on these observations, the Glen Torridon ridges are interpreted to be consistent with an origin as wind-eroded periodic bedrock ridges carved during the most recent exhumation of Mount Sharp into the present-day mound. Although there is evidence for multidirectional winds in the Glen Torridon region based on the orientation of modern ripples, megaripples, TARs and other bedrock indicators, the consistent orientation of the Glen Torridon ridges, coupled with morphologic asymmetries within the ridges, support formation and elongation of the Glen Torridon PBRs forms parallel to a net regional northerly wind direction in and around Gale crater.

Journal of Geophysical Research E: Planets↗
USGS2016

Large wind ripples on Mars: A record of atmospheric evolution

Wind blowing over sand on Earth produces decimeter-wavelength ripples and hundred-meter– to kilometer-wavelength dunes: bedforms of two distinct size modes. Observations from the Mars Science Laboratory Curiosity rover and the Mars Reconnaissance Orbiter reveal that Mars hosts a third stable wind-driven bedform, with meter-scale wavelengths. These bedforms are spatially uniform in size and typically have asymmetric profiles with angle-of-repose lee slopes and sinuous crest lines, making them unlike terrestrial wind ripples. Rather, these structures resemble fluid-drag ripples, which on Earth include water-worked current ripples, but on Mars instead form by wind because of the higher kinematic viscosity of the low-density atmosphere. A reevaluation of the wind-deposited strata in the Burns formation (about 3.7 billion years old or younger) identifies potential wind-drag ripple stratification formed under a thin atmosphere.

Science↗
USGS2015

Deposition, exhumation, and paleoclimate of an ancient lake deposit, Gale crater, Mars

The landforms of northern Gale crater on Mars expose thick sequences of sedimentary rocks. Based on images obtained by the Curiosity rover, we interpret these outcrops as evidence for past fluvial, deltaic, and lacustrine environments. Degradation of the crater wall and rim probably supplied these sediments, which advanced inward from the wall, infilling both the crater and an internal lake basin to a thickness of at least 75 meters. This intracrater lake system probably existed intermittently for thousands to millions of years, implying a relatively wet climate that supplied moisture to the crater rim and transported sediment via streams into the lake basin. The deposits in Gale crater were then exhumed, probably by wind-driven erosion, creating Aeolis Mons (Mount Sharp).

Science↗
USGS2011

Giant sand waves at the mouth of San Francisco Bay

A field of giant sand waves, among the largest in the world, recently was mapped in high resolution for the first time during a multibeam survey in 2004 and 2005 through the strait of the Golden Gate at the mouth of San Francisco Bay in California (Figure la). This massive bed form field covers an area of approximately four square kilometers in water depths ranging from 30 to 106 meters, featuring more than 40 distinct sand waves with crests aligned approximately perpendicular to the dominant tidally generated cross-shore currents, with wavelengths and heights that measure up to 220 meters and 10 meters, respectively. Sand wave crests can be traced continuously for up to two kilometers across the mouth of this energetic tidal inlet, where depth-averaged tidal currents through the strait below the Golden Gate Bridge exceed 2.5 meters per second during peak ebb flows. Repeated surveys demonstrated that the sand waves are active and dynamic features that move in response to tidally generated currents. The complex temporal and spatial variations in wave and tidal current interactions in this region result in an astoundingly diverse array of bed form morphologies, scales, and orientations. Bed forms of approximately half the scale of those reported in this article previously were mapped inside San Francisco Bay during a multibeam survey in 1997 [Chin et al., 1997].

California↗
USGS2010

A universal approximation to grain size from images of non-cohesive sediment

The two-dimensional spectral decomposition of an image of sediment provides a direct statistical estimate, grid-by-number style, of the mean of all intermediate axes of all single particles within the image. We develop and test this new method which, unlike existing techniques, requires neither image processing algorithms for detection and measurement of individual grains, nor calibration. The only information required of the operator is the spatial resolution of the image. The method is tested with images of bed sediment from nine different sedimentary environments (five beaches, three rivers, and one continental shelf), across the range 0.1 mm to 150 mm, taken in air and underwater. Each population was photographed using a different camera and lighting conditions. We term it a “universal approximation” because it has produced accurate estimates for all populations we have tested it with, without calibration. We use three approaches (theory, computational experiments, and physical experiments) to both understand and explore the sensitivities and limits of this new method. Based on 443 samples, the root-mean-squared (RMS) error between size estimates from the new method and known mean grain size (obtained from point counts on the image) was found to be ±≈16%, with a 95% probability of estimates within ±31% of the true mean grain size (measured in a linear scale). The RMS error reduces to ≈11%, with a 95% probability of estimates within ±20% of the true mean grain size if point counts from a few images are used to correct bias for a specific population of sediment images. It thus appears it is transferable between sedimentary populations with different grain size, but factors such as particle shape and packing may introduce bias which may need to be calibrated for. For the first time, an attempt has been made to mathematically relate the spatial distribution of pixel intensity within the image of sediment to the grain size.

Journal of Geophysical Research F: Earth Surface↗
USGS2009

Cobble cam: Grain-size measurements of sand to boulder from digital photographs and autocorrelation analyses

A new application of the autocorrelation grain size analysis technique for mixed to coarse sediment settings has been investigated. Photographs of sand- to boulder-sized sediment along the Elwha River delta beach were taken from approximately 1??2 m above the ground surface, and detailed grain size measurements were made from 32 of these sites for calibration and validation. Digital photographs were found to provide accurate estimates of the long and intermediate axes of the surface sediment (r 2 > 0??98), but poor estimates of the short axes (r 2 = 0??68), suggesting that these short axes were naturally oriented in the vertical dimension. The autocorrelation method was successfully applied resulting in total irreducible error of 14% over a range of mean grain sizes of 1 to 200 mm. Compared with reported edge and object-detection results, it is noted that the autocorrelation method presented here has lower error and can be applied to a much broader range of mean grain sizes without altering the physical set-up of the camera (~200-fold versus ~6-fold). The approach is considerably less sensitive to lighting conditions than object-detection methods, although autocorrelation estimates do improve when measures are taken to shade sediments from direct sunlight. The effects of wet and dry conditions are also evaluated and discussed. The technique provides an estimate of grain size sorting from the easily calculated autocorrelation standard error, which is correlated with the graphical standard deviation at an r 2 of 0??69. The technique is transferable to other sites when calibrated with linear corrections based on photo-based measurements, as shown by excellent grain-size analysis results (r 2 = 0??97, irreducible error = 16%) from samples from the mixed grain size beaches of Kachemak Bay, Alaska. Thus, a method has been developed to measure mean grain size and sorting properties of coarse sediments. ?? 2009 John Wiley & Sons, Ltd.

Earth Surface Processes and Landforms↗
USGS2009

Sulfate-rich eolian and wet interdune deposits, erebus crater, meridiani Planum, Mars

This study investigates three bedrock exposures at Erebus crater, an ?? 300 m diameter crater approximately 4 km south of Endurance crater on Mars. These outcrops, called Olympia, Payson, and Yavapai, provide additional evidence in support of the dune-interdune model proposed for the formation of the deposits at the Opportunity landing site in Meridiani Planum. There is evidence for greater involvement of liquid water in the Olympia outcrop exposures than was observed in Eagle or Endurance craters. The Olympia outcrop likely formed in a wet interdune and sand sheet environment. The facies observed within the Payson outcrop, which is likely stratigraphically above the Olympia outcrop, indicate that it was deposited in a damp-wet interdune, sand sheet, and eolian dune environment. The Yavapai outcrop, which likely stratigraphically overlies the Payson outcrop, indicates that it was deposited in primarily a sand sheet environment and also potentially in an eolian dune environment. These three outcrop exposures may indicate an overall drying-upward trend spanning the stratigraphic section from its base at the Olympia outcrop to its top at the Yavapai outcrop. This contrasts with the wetting-upward trend seen in Endurance and Eagle craters. Thus, the series of outcrops seen at Meridiani by Opportunity may constitute a full climatic cycle, evolving from dry to wet to dry conditions. ?? 2009, SEPM (Society for Sedimentary Geology).

Journal of Sedimentary Research↗
USGS2008

A second look at western Sinai seif dunes and their lateral migration

Tsoar et al. [Tsoar, H., Blumberg, D.G., Stoler, Y., 2004. Elongation and migration of sand dunes. Geomorphology 57, 293-302.] reported that seif dunes in the western Sinai Desert did not migrate laterally between 1973 and 1999. If the planform sinuosities of the dunes are removed by filtering, spatial averaging, or linear regression, however, it is evident that the dunes did, in fact, migrate laterally roughly 13??m during this 26-year period. The measured migration distance is 1-2 orders of magnitude greater than the rms co-registration error Tsoar et al. determined for the first and last air photos that were used to map the dunes. The western Sinai dunes provide another example demonstrating that linear dunes can migrate laterally, and they illustrate some of the difficulties in documenting systematic lateral motion. Lateral migration of a dune can be important geologically or geomorphologically, even where migration is too slow to detect from repeated topographic surveys. This article explains the wind conditions for the lateral migration of seif dunes in western Sinai and the possible wind occurrences that would not lead to such a migration.

Geomorphology↗
USGS2008

Application of sedimentary-structure interpretation to geoarchaeological investigations in the Colorado River Corridor, Grand Canyon, Arizona, USA

We present a detailed geoarchaeological study of landscape processes that affected prehistoric formation and modern preservation of archaeological sites in three areas of the Colorado River corridor in Grand Canyon, Arizona, USA. The methods used in this case study can be applied to any locality containing unaltered, non-pedogenic sediments and, thus, are particularly relevant to geoarchaeology in arid regions. Resolving the interaction of fluvial, aeolian, and local runoff processes in an arid-land river corridor is important because the archaeological record in arid lands tends to be concentrated along river corridors. This study uses sedimentary structures and particle-size distributions to interpret landscape processes; these methods are commonplace in sedimentology but prove also to be valuable, though less utilized, in geoarchaeology and geomorphology. In this bedrock canyon, the proportion of fluvial sediment generally decreases with distance away from the river as aeolian, slope-wash, colluvial, and debris-flow sediments become more dominant. We describe a new facies consisting of 'flood couplets' that include a lower, fine-grained fluvial component and an upper, coarser, unit that reflects subaerial reworking at the land surface between flood events. Grain-size distributions of strata that lack original sedimentary structures are useful within this river corridor to distinguish aeolian deposits from finer-grained fluvial deposits that pre-date the influence of the upstream Glen Canyon Dam on the Colorado River. Identification of past geomorphic settings is critical for understanding the history and preservation of archaeologically significant areas, and for determining the sensitivity of archaeological sites to dam operations. Most archaeological sites in the areas studied were formed on fluvial deposits, with aeolian deposition acting as an important preservation agent during the past millennium. Therefore, the absence of sediment-rich floods in this regulated river, which formerly deposited large fluvial sandbars from which aeolian sediment was derived, has substantially altered processes by which the prehistoric, inhabited landscape formed, and has also reduced the preservation potential of many significant cultural sites.

Geomorphology↗
USGS2008

Is there enough sand? Evaluating the fate of Grand Canyon sandbars

Large dams have the potential to dramatically alter the flow regime, geomorphology, and aquatic ecosystem of downstream river reaches. Development of flow release regimes in order to meet multiple objectives is a challenge facing dam operators, resource managers, and scientists. Herein, we review previous work and present new analyses related to the effects of Glen Canyon Dam on the downstream reach of the Colorado River in Marble and Grand Canyons. The dam traps the entire incoming sediment load in Lake Powell and modulates the hydrologic regime by, for example, eliminating spring snowmelt floods, resulting in changes in the geomorphology of the river downstream. The primary geomorphic impact has been the erosion of sandbars along the banks of the river. Recognition of this impact has led to many scientific studies and a variety of experimental operations of Glen Canyon Dam with the goal of rebuilding the eroding sandbars. These efforts have thus far been generally unsuccessful and the question remains as to whether or not the dam can be operated such that sandbars can be rebuilt and maintained over extended periods with the existing sediment supply. We attempt to answer this question by evaluating a dam operation that may be considered a "best-case scenario" for rebuilding and maintaining eroded sandbars. Our analysis suggests that this best-case scenario may indeed have viability for rebuilding sandbars, and that the initial rate at which sandbars could be rebuilt is comparable to the rate at which sandbars have been eroded since dam construction. The question remains open as to the viability of operations that deviate from the best-case scenario that we have defined.

Grand Canyon↗
USGS2007

Suspended-sediment rating curve response to urbanization and wildfire, Santa Ana River, California

[1] River suspended-sediment concentrations provide insights to the erosion and transport of materials from a landscape, and changes in concentrations with time may result from landscape processes or human disturbance. Here we show that suspended-sediment concentrations in the Santa Ana River, California, decreased 20-fold with respect to discharge during a 34-year period (1968−2001). These decreases cannot be attributed to changes in sampling technique or timing, nor to event or seasonal hysteresis. Annual peak and total discharge, however, reveal sixfold increases over the 34-year record, which largely explain the decreases in sediment concentration by a nonlinear dilution process. The hydrological changes were related to the widespread urbanization of the watershed, which resulted in increases in storm water discharge without detectable alteration of sediment discharge, thus reducing suspended-sediment concentrations. Periodic upland wildfire significantly increased water discharge, sediment discharge, and suspended-sediment concentrations and thus further altered the rating curve with time. Our results suggest that previous inventories of southern California sediment flux, which assume time-constant rating curves and extend these curves beyond the sampling history, may have substantially overestimated loads during the most recent decades.

California↗
USGS2007

Coupled changes in sand grain size and sand transport driven by changes in the upstream supply of sand in the Colorado River: relative importance of changes in bed-sand grain size and bed-sand area

Sand transport in the Colorado River in Marble and Grand canyons was naturally limited by the upstream supply of sand. Prior to the 1963 closure of Glen Canyon Dam, the river exhibited the following four effects of sand supply limitation: (1) hysteresis in sediment concentration, (2) hysteresis in sediment grain size coupled to the hysteresis in sediment concentration, (3) production of inversely graded flood deposits, and (4) development or modification of a lag between the time of a flood peak and the time of either maximum or minimum (depending on reach geometry) bed elevation. Construction and operation of the dam has enhanced the degree to which the first two of these four effects are evident, and has not affected the degree to which the last two effects of sand supply limitation are evident in the Colorado River in Marble and Grand canyons. The first three of the effects involve coupled changes in suspended-sand concentration and grain size that are controlled by changes in the upstream supply of sand. During tributary floods, sand on the bed of the Colorado River fines; this causes the suspended sand to fine and the suspended-sand concentration to increase, even when the discharge of water remains constant. Subsequently, the bed is winnowed of finer sand, the suspended sand coarsens, and the suspended-sand concentration decreases independently of discharge. Also associated with these changes in sand supply are changes in the fraction of the bed that is covered by sand. Thus, suspended-sand concentration in the Colorado River is likely regulated by both changes in the bed-sand grain size and changes in the bed-sand area. A physically based flow and suspended-sediment transport model is developed, tested, and applied to data from the Colorado River to evaluate the relative importance of changes in the bed-sand grain size and changes in the bed-sand area in regulating suspended-sand concentration. Although the model was developed using approximations for steady, uniform flow, and other simplifications that are not met in the Colorado River, the results nevertheless support the idea that changes in bed-sand grain size are much more important than changes in bed-sand area in regulating the concentration of suspended sand.

Arizona↗
USGS2007

Field test comparison of an autocorrelation technique for determining grain size using a digital 'beachball' camera versus traditional methods

This extensive field test of an autocorrelation technique for determining grain size from digital images was conducted using a digital bed-sediment camera, or 'beachball' camera. Using 205 sediment samples and >1200 images from a variety of beaches on the west coast of the US, grain size ranging from sand to granules was measured from field samples using both the autocorrelation technique developed by Rubin [Rubin, D.M., 2004. A simple autocorrelation algorithm for determining grain size from digital images of sediment. Journal of Sedimentary Research, 74(1): 160-165.] and traditional methods (i.e. settling tube analysis, sieving, and point counts). To test the accuracy of the digital-image grain size algorithm, we compared results with manual point counts of an extensive image data set in the Santa Barbara littoral cell. Grain sizes calculated using the autocorrelation algorithm were highly correlated with the point counts of the same images (r2 = 0.93; n = 79) and had an error of only 1%. Comparisons of calculated grain sizes and grain sizes measured from grab samples demonstrated that the autocorrelation technique works well on high-energy dissipative beaches with well-sorted sediment such as in the Pacific Northwest (r2 ??? 0.92; n = 115). On less dissipative, more poorly sorted beaches such as Ocean Beach in San Francisco, results were not as good (r2 ??? 0.70; n = 67; within 3% accuracy). Because the algorithm works well compared with point counts of the same image, the poorer correlation with grab samples must be a result of actual spatial and vertical variability of sediment in the field; closer agreement between grain size in the images and grain size of grab samples can be achieved by increasing the sampling volume of the images (taking more images, distributed over a volume comparable to that of a grab sample). In all field tests the autocorrelation method was able to predict the mean and median grain size with ???96% accuracy, which is more than adequate for the majority of sedimentological applications, especially considering that the autocorrelation technique is estimated to be at least 100 times faster than traditional methods.

Sedimentary Geology↗
USGS2006

Reconstructing depositional processes and history from reservoir stratigraphy: Englebright Lake, Yuba River, northern California

Reservoirs provide the opportunity to link watershed history with its stratigraphic record. We analyze sediment cores from a northern California reservoir in the context of hydrologic history, watershed management, and depositional processes. Observations of recent depositional patterns, sediment‐transport calculations, and 137 Cs geochronology support a conceptual model in which the reservoir delta progrades during floods of short duration (days) and is modified during prolonged (weeks to months) drawdowns that rework topset beds and transport sand from topsets to foresets. Sediment coarser than 0.25–0.5 mm deposits in foresets and topsets, and finer material falls out of suspension as bottomset beds. Simple hydraulic calculations indicate that fine sand (0.063–0.5 mm) is transported into the distal bottomset area only during floods. The overall stratigraphy suggests that two phases of delta building occurred in the reservoir. The first, from dam construction in 1940 to 1970, was heavily influenced by annual, prolonged >20 m drawdowns of the water level. The second, built on top of the first, reflects sedimentation from 1970 to 2002 when the influence of drawdowns was less. Sedimentation rates in the central part of the reservoir have declined ∼25% since 1970, likely reflecting a combination of fewer large floods, changes in watershed management, and winnowing of stored hydraulic mining sediment.

Journal of Geophysical Research F: Earth Surface↗
USGS2006

Lateral migration of linear dunes in the Strzelecki Desert, Australia

Preferential accumulation of sand on east-facing flanks indicates that the dunes migrated eastward several metres during the Holocene. Moreover, the west-facing flanks of some dunes have experienced a minimum of tens of metres of erosion. This asymmetric erosion and deposition were caused by dune obliquity and lateral migration that may have begun as early as the Pleistocene. Dunes in the Strzelecki Desert and in the adjacent Simpson Desert display a variety of grossly different internal structures. -from Author

Earth Surface Processes and Landforms↗
USGS2006

Bedform climbing in theory and nature

Where bedforms migrate during deposition, they move upward (climb) with respect to the generalized sediment surface. Sediment deposited on each lee slope and not eroded during the passage of a following trough is left behind as a cross-stratified bed. Because sediment is thus transferred from bedforms to underlying strata, bedforms must decrease in cross-sectional area or in number, or both, unless sediment lost from bedforms during deposition is replaced with sediment transported from outside the depositional area. Where sediment is transported solely by downcurrent migration of two-dimensional bedforms, the mean thickness of cross-stratified beds is equal to the decrease in bedform cross-sectional area divided by the migration distance over which that size decrease occurs; where bedforms migrate more than one spacing while depositing cross-strata, bed thickness is only a fraction of bedform height. Equations that describe this depositional process explain the downcurrent decrease in size of tidal sand waves in St Andrew Bay, Florida, and the downwind decrease in size of transverse aeolian dunes on the Oregon coast. Using the same concepts, dunes that deposited the Navajo, De Chelly, and Entrada Sandstones are calculated to have had mean heights between several tens and several hundreds of metres.

Sedimentology↗
USGS2005

Regulation of sand transport in the Colorado River by changes in the surface grain size of eddy sandbars over multi-year timescales

In settings where the transport of sand is partially or fully supply limited, changes in the upstream supply of sand are coupled to changes in the grain size of sand on the bed. In this manner, the transport of sand under the supply-limited case is 'grain-size regulated'. Since the closure of Glen Canyon Dam in 1963, the downstream reach of the Colorado River in Marble and Grand Canyons has exhibited evidence of sand-supply limitation. Sand transport in the river is now approximately equally regulated by changes in the discharge of water and changes in the grain sizes of sand on the channel bed and eddy sandbars. Previous work has shown that changes in the grain size of sand on the bed of the channel (driven by changes in the upstream supply of sand owing to both tributary floods and high dam releases) are important in regulating sand transport over timescales of days to months. In this study, suspended-sand data are analysed in conjunction with bed grain-size data to determine whether changes in the grain size of sand on the bed of the channel or changes in the grain size of sand on the surface of eddy sandbars have been more important in regulating sand transport in the post-dam Colorado River over longer, multi-year timescales. The results of this study show that this combined theory- and field-based approach can be used to deduce which environments in a complicated setting are the most important environments for regulating sediment transport. In the case of the regulated Colorado River in Marble and Upper Grand Canyons, suspended-sand transport has been regulated mostly by changes in the surface grain size of eddy sandbars. ?? 2005 International Association of Sedimentologists.

Sedimentology↗