Geology topics

D. L. Runkle

Publications and source records attributed to D. L. Runkle.

11 recordsLinked to original sources

USGS1998

Hydrogeology, water quality, and geochemistry of the Rush Springs aquifer, western Oklahoma

The Rush Springs aquifer, in western Oklahoma, is equivalent to the Permian-age Rush Springs Formation. It is composed of very fine-grained to fine-grained sandstone that is massive to highly cross-bedded and is underlain by less-permeable Marlow Formation. Reported irrigation well yields exceed 1,000 gallons per minute; yields reported on 89 drillers' logs ranged from 11 to 850 gallons per minute. Transmissivities range from 670 to 1,870 feet squared per day. Specific yields for core samples range from 0.13 to 0.34. Estimates of hydraulic conductivities at one site ranged from 1.05 to 5.62 feet per day. The Rush Springs aquifer is recharged by infiltration of precipitation, ranging from 0.2 to more than 2 inches per year. Discharge is primarily to streams and rivers where the Rush Springs aquifer crops. Estimated total withdrawal was 54.7 million gallons per day in 1990. Over 42 million gallons per day, or 77.8 percent of water withdrawn, was used for irrigation of crops. Thirty-five of the 64 wells sampled produced nitrate concentration that equaled or exceeded drinking water standards. Sulfate concentration also exceeds the drinking water standards in some areas. Two major water types occur in the aquifer, a calcium-magnesium bicarbonate type and a calcium sulfate type. Dissolved solids concentrations in water samples from the aquifer ranged from 52 to 1,840 milligrams per liter. The chemical composition of ground water in the Rush Springs aquifer is the result of chemical reactions between the recharge waters and minerals in the overlying soils and rocks in the Rush Springs and Marlow Formations. Saturation indices of minerals were calculated for 64 water-quality analyses using the geochemical computer model WATEQF. Mass transfer rates were calculated using the mass-balance model NETPATH.

Water-Resources Investigations Report↗

USGS1997

Digital data sets that describe aquifer characteristics of the alluvial and terrace deposits along the Beaver-North Canadian River from the panhandle to Canton Lake in northwestern Oklahoma

ARC/INFO export and nonproprietary format files This diskette contains digitized aquifer boundaries and maps of of hydraulic conductivity, recharge, and ground-water level elevation contours for the alluvial and terrace deposits along the alluvial and terrace deposits along the Beaver-North Canadian River from the panhandle to Canton Lake in northwestern Oklahoma. Ground water in 830 square miles of the Quaternary-age alluvial and terrace aquifer is an important source of water for irrigation, industrial, municipal, stock, and domestic supplies. The aquifer consists of poorly sorted, fine to coarse, unconsolidated quartz sand with minor amounts of clay, silt, and basal gravel. The hydraulically connected alluvial and terrace deposits unconformably overlie the Tertiary-age Ogallala Formation and Permian-age formations. Most of the lines in the aquifer boundary and recharge data sets and some of the lines in the hydraulic conductivity data set were extracted from a published digital surficial geology data set based on a scale of 1:250,000. The ground-water elevation contours and some of the lines for the aquifer boundary, hydraulic conductivity, and recharge data sets were digitized from a ground-water modeling report about the aquifer published at a scale of 1:250,000. The hydraulic conductivity values and recharge rates also are from the ground-water modeling report. The data sets are provided in both nonproprietary and ARC/INFO export file formats. Ground-water flow models are numerical representations that simplify and aggregate natural systems. Models are not unique; different combinations of aquifer characteristics may produce similar results. Therefore, values of hydraulic conductivity and recharge used in the model and presented in this data set are not precise, but are within a reasonable range when compared to independently collected data.

Oklahoma↗

USGS1997

Digital data sets that describe aquifer characteristics of the Elk City Aquifer in western Oklahoma

ARC/INFO export and nonproprietary format files This diskette contains digitized aquifer boundaries and maps of hydraulic conductivity, recharge, and ground-water level elevation contours for the Elk City aquifer in western Oklahoma. The aquifer covers an area of approximately 193,000 acres and supplies ground water for irrigation, domestic, and industrial purposes in Beckham, Custer, Roger Mills, and Washita Counties along the divide between the Washita and Red River basins. The Elk City aquifer consists of the Elk City Sandstone and overlying terrace deposits, made up of clay, silt, sand and gravel, and dune sands in the eastern part and sand and gravel of the Ogallala Formation (or High Plains aquifer) in the western part of the aquifer. The Elk City aquifer is unconfined and composed of very friable sandstone, lightly cemented with clay, calcite, gypsum, or iron oxide. Most of the grains are fine-sized quartz but the grain size ranges from clay to cobble in the aquifer. The Doxey Shale underlies the Elk City aquifer and acts as a confining unit, restricting the downward movement of ground water. All of the data sets were digitized and created from information and maps in a ground-water modeling thesis and report of the Elk City aquifer. The maps digitized were published at a scale of 1:63,360. Ground-water flow models are numerical representations that simplify and aggregate natural systems. Models are not unique; different combinations of aquifer characteristics may produce similar results. Therefore, values of hydraulic conductivity and recharge used in the model and presented in this data set are not precise, but are within a reasonable range when compared to independently collected data.

Oklahoma↗

USGS1997

Digital data sets that describe aquifer characteristics of the Enid isolated terrace aquifer in northwestern Oklahoma

ARC/INFO export and nonproprietary format files The data sets in this report include digitized aquifer boundaries and maps of hydraulic conductivity, recharge, and ground-water level elevation contours for the Enid isolated terrace aquifer in northwestern Oklahoma. The Enid isolated terrace aquifer covers approximately 82 square miles and supplies water for irrigation, domestic, municipal, and industrial use for the City of Enid and western Garfield County. The Quaternary-age Enid isolated terrace aquifer is composed of terrace deposits that consist of discontinuous layers of clay, sandy clay, sand, and gravel. The aquifer is unconfined and is bounded by the underlying Permian-age Hennessey Group on the east and the Cedar Hills Sandstone Formation of the Permian-age El Reno Group on the west. The Cedar Hills Sandstone Formation fills a channel beneath the thickest section of the Enid isolated terrace aquifer in the midwestern part of the aquifer. All of the data sets were digitized and created from information and maps in a ground-water modeling thesis and report of the Enid isolated terrace aquifer. The maps digitized were published at a scale of 1:62,500. Ground-water flow models are numerical representations that simplify and aggregate natural systems. Models are not unique; different combinations of aquifer characteristics may produce similar results. Therefore, values of hydraulic conductivity and recharge used in the model and presented in this data set are not precise, but are within a reasonable range when compared to independently collected data.

Oklahoma↗

USGS1997

Digital data sets that describe aquifer characteristics of the High Plains aquifer in western Oklahoma

ARC/INFO export files This diskette contains digitized aquifer boundaries and maps of hydraulic conductivity, recharge, and ground-water level elevation contours for the High Plains aquifer in western Oklahoma. This area encompasses the panhandle counties of Cimarron, Texas, and Beaver, and the western counties of Harper, Ellis, Woodward, Dewey, and Roger Mills. The High Plains aquifer underlies approximately 7,000 square miles of Oklahoma and is used extensively for irrigation. The High Plains aquifer is a water-table aquifer and consists predominately of the Tertiary-age Ogallala Formation and overlying Quaternary-age alluvial and terrace deposits. In some areas the aquifer is absent and the underlying Triassic, Jurassic, or Cretaceous-age rocks are exposed at the surface. These rocks are hydraulically connected with the aquifer in some areas. The High Plains aquifer is composed of interbedded sand, siltstone, clay, gravel, thin limestones, and caliche. The proportion of various lithological materials changes rapidly from place to place, but poorly sorted sand and gravel predominate. The rocks are poorly to moderately well cemented by calcium carbonate. The aquifer boundaries, hydraulic conductivity, and recharge data sets were created by extracting geologic contact lines from published digital surficial geology maps based on a scale of 1:125,000 for the panhandle counties and 1:250,000 for the western counties. The water-level elevation contours and some boundary lines were digitized from maps in a published water-level elevation map for 1980 based on a scale of 1:250,000. The hydraulic conductivity and recharge values in this report were used as input to the ground-water flow model on the High Plains aquifer. Ground-water flow models are numerical representations that simplify and aggregate natural systems. Models are not unique; different combinations of aquifer characteristics may produce similar results. Therefore, values of hydraulic conductivity and recharge used in the model and presented in this data set are not precise, but are within a reasonable range when compared to independently collected data.

Oklahoma↗

USGS1997

Digital data sets that describe aquifer characteristics of the Tillman terrace and alluvial aquifer in southwestern Oklahoma

ARC/INFO export and nonproprietary format files This diskette contains digitized aquifer boundaries and maps of hydraulic conductivity, recharge, and ground-water level elevation contours for the Tillman terrace and alluvial aquifer in southwestern Oklahoma. The Tillman terrace aquifer encompasses the unconsolidated terrace deposits and alluvium associated with the North Fork of the Red River and the Red River in the western half of Tillman County. These sediments consist of discontinuous layers of clay, sandy clay, sand, and gravel. The aquifer extends over an area of 285 square miles and is used for irrigation and domestic purposes. Granite and the Hennessey Formation outcrop in northern parts of the aquifer where alluvial deposits are absent. These outcrops were included as part of the aquifer in a thesis that modeled the ground-water flow in the aquifer. Most of the aquifer boundaries and some of the lines in the hydraulic conductivity and recharge data sets were extracted from a published digital surficial geology data set based on a scale of 1:250,000. Most of the lines in the hydraulic conductivity, recharge, and 1969 water-level elevation contour data sets, and one line in the aquifer boundary data set were digitized from a paper map published at a scale of 1:249,695 in a thesis in which the ground-water flow in the aquifer was modeled. Ground-water flow models are numerical representations that simplify and aggregate natural systems. Models are not unique; different combinations of aquifer characteristics may produce similar results. Therefore, values of hydraulic conductivity and recharge used in the model and presented in this data set are not precise, but are within a reasonable range when compared to independently collected data.

Oklahoma↗

USGS1997

Digital data sets that describe aquifer characteristics of the Rush Springs Aquifer in western Oklahoma

This diskette contains digitized aquifer boundaries and maps of hydraulic conductivity, recharge, and ground-water level elevation contours for the Rush Spring aquifer in western Oklahoma. This area encompasses all or part of Blaine, Caddo, Canadian, Comanche, Custer, Dewey, Grady, Stephens, and Washita Counties. These digital data sets were developed by Mark F. Becker to use as input into a computer model that simulated ground-water flow in the Rush Springs aquifer (Mark F. Becker, U.S. Geological Survey, written commun., 1997). For the purposes of modeling the ground-water flow in the Rush Springs aquifer, Mark F. Becker (written commun., 1997) defined the Rush Springs aquifer to include the Rush Springs Formation, alluvial and terrace deposits along major streams, and parts of the Marlow Formations, particularly in the eastern part of the aquifer boundary area. The Permian-age Rush Springs Formation consists of highly cross-bedded sandstone with some interbedded dolomite and gypsum. The Rush Springs Formation is overlain by Quaternary-age alluvial and terrace deposits that consist of unconsolidated clay, silt, sand, and gravel. The Rush Springs Formation is underlain by the Permian-age Marlow Formation that consists of interbedded sandstones, siltstones, mudstones, gypsum-anhydrite, and dolomite beds (Mark F. Becker, written commun., 1997). The parts of the Marlow Formation that have high permeability and porosity are where the Marlow Formation is included as part of the Rush Springs aquifer. The Rush Springs aquifer underlies about 2,400 square miles of western Oklahoma and is an important source of water for irrigation, livestock, industrial, municipal, and domestic use. Irrigation wells are reported to have well yields greater than 1,000 gallons per minute (Mark F. Becker, written commun., 1997). Mark F. Becker created some of the aquifer boundaries, hydraulic conductivity, and recharge data sets by digitizing parts of previously published surficial geology maps. The hydraulic conductivity and recharge values are the input data to the ground-water flow model (Mark F. Becker, written commun., 1997). The water-level elevation data set was prepared at a scale of 1:250,000 by Mark F. Becker (written commun., 1997) from water levels measured in wells prior to the year 1950. Ground-water flow models are numerical representations that simplify and aggregate natural systems. Models are not unique; different combinations of aquifer characteristics may produce similar results. Therefore, values of hydraulic conductivity and recharge used in the model and presented in this data set are not precise, but are within a reasonable range when compared to independently collected data.

Oklahoma↗

USGS1997

Digital data sets that describe aquifer characteristics of the Central Oklahoma Aquifer in central Oklahoma

ARC/INFO export files The data sets in this report include digitized aquifer boundaries and maps of hydraulic conductivity, recharge, and ground-water level elevation contours for the Central Oklahoma aquifer in central Oklahoma. This area encompasses all or part of Cleveland, Lincoln, Logan, Oklahoma, Payne, and Pottawatomie Counties. The Central Oklahoma aquifer includes the alluvial and terrace deposits along major streams, the Garber Sandstone and Wellington Formations, and the Chase, Council Grove, and Admire Groups. The Quaternary-age alluvial and terrace deposits consist of unconsolidated clay, silt, sand, and gravel. The Permian-age Garber Sandstone and Wellington Formations consist of sandstone with interbedded siltstone and mudstone. The Permian-age Chase, Council Grove, and Admire Groups consist of sandstone, shale, and thin limestone. The Central Oklahoma aquifer underlies about 3,000 square miles of central Oklahoma where the aquifer is used extensively for municipal, industrial, commercial, and domestic water supplies. Most of the usable ground water within the aquifer is from the Garber Sandstone and Wellington Formations. Substantial quantities of usable ground water also are present in the Chase, Council Grove, and Admire Groups, and in alluvial and terrace deposits associated with the major streams. The aquifer boundaries, hydraulic conductivity and recharge values, and ground-water level elevation contours are from previously published reports.

Oklahoma↗

USGS1997

Hydrogeologic data for the Blaine aquifer and associated units in southwestern Oklahoma and northwestern Texas

This report is a compilation of hydrogeologic data collected for an areal ground-water investigation of the Blaine aquifer and associated units in southwestern Oklahoma and northwestern Texas. The study area includes parts of Greer, Harmon, and Jackson counties in Oklahoma and parts of Childress, Collingsworth, Hall, Hardeman, and Wilbarger counties in Texas. The Blaine aquifer consists of cavernous gypsum and dolomite beds. Water from the Blaine aquifer supports a local agriculture based mainly on irrigated cotton and wheat. The purpose of the study was to determine the availability, quantity, and quality of ground water from the Blaine aquifer and associated units. This report provides a reference for some of the data that was used as input into a computer ground-water flow model that simulates ground-water flow in the Blaine aquifer. The data in this report consists of: (1) Monthly or periodic water-level measurements in 134 wells; (2) daily mean water-level measurements for 11 wells equipped with water-level recorders; (3) daily total precipitation measurements from five precipitation gages; (4) low-flow stream-discharge measurements for 89 stream sites; (5) miscellaneous stream-discharge measurements at seven stream sites; (6) chemical analyses of surface water from 78 stream sites during low-flow periods; (7) chemical analyses of ground water from 41 wells; and (8) chemical analyses of runoff water collected at five sites.

Open-File Report↗

USGS1985

Permitted water use in Iowa, 1985

This report summarizes where, how much and for what purpose water is allocated for use in Iowa with permits issued by the Department of Water, Air and Waste Management. In Iowa, from a total permitted water use of 855,175.45 million gallons per year, about 58 percent is from surface-water sources and about 42 percent is from ground-water sources. Streams are 80.5 percent of the total surface-water use and wells make up 80.1 percent of the total ground-water use, with 65.4 percent of ground water coming from surficial aquifers. Power generation is the use category that is permitted the largest amount of total water use, 46.6 percent, with surface water being the source of 96.7 percent and 77.9 percent of the surface water is from streams. The public water suppliers' category is the next largest use type with 15.7 percent of the total permitted water. Ground water constitutes 74.4 percent of the public water supplier category with 51.7 percent from surficial aquifers. Surface water makes up 25.6 percent of this category with 83.0 percent of the surface water withdrawn from streams. Mining comprises 13.4 percent of the total water use and is the third largest water-use category. Ground water is the source of 63.3 percent of permitted mining water use with 94.3 percent of this from quarries and sand and gravel pits. Surface water is the source of 36.7 percent of the permitted mining water use with 97.6 percent from streams. Irrigation is the fourth largest permitted use type using 12.0 percent of the total water use. Eighty-eight percent of irrigation is from ground-water sources where surficial aquifers account for 94.7 percent. Streams are 81.1 percent of irrigational surface-water use. Self-supplied industrial users are permitted 10.6 percent of the total permitted water use with 85.5 percent of this from ground-water sources and 14.5 percent from surface-water sources. Of the self-supplied industrial ground-water use, 47.9 percent comes from surficial aquifers and of the self-supplied industrial surface-water use 86.1 percent is from streams. Self-supplied commercial use is allocated 1.5 percent of the total permitted water. Surface-water is the source of 37.7 percent of this and 62.3 percent is from ground-water sources. Agricultural (non-irrigation) use is 0.3 percent of the total permitted water with 73.3 percent from groundwater sources and 26.7 percent from surface-water sources. The areas that are allocated the most water permits are east-central Iowa and west-central Iowa.

Iowa↗

USGS1985

Hydrology of the alluvial, buried channel, basal Pleistocene and Dakota aquifers in west-central Iowa

A ground-water resources investigation in west-central Iowa indicates that water is available from alluvial, buried channel, basal Pleistocene, and Dakota aquifers. The west-central Iowa area includes Audubon, Carrol1, Crawford, Greene, Guthrie, Harrison, Monona, and Shelby Counties. Nine alluvial aquifers consisting of sand and gravel are in the valleys of the Little Sioux, Maple, Soldier, Boyer, West Nishnabotna, East Nishnabotna, South Raccoon, Middle Raccoon, and North Raccoon Rivers. These aquifers contain about 870,000 acre-feet of water that is potentially available to wells. Potential well yields generally are less than 50 gallons per minute. The water generally is very hard (greater than 180 milligrams per liter hardness as calcium carbonate), is a calcium bicarbonate type, and has an average dissolved-solids concentration of less than 600 milligrams per liter. Seven buried channel aquifers Anthon, Denison, Fremont, Hardin Creek, Adaza, Beaver, and Bagley consisting of sand and gravel, underlie about 594 square miles in west-central Iowa and contain about 65,000 acre-feet of water potentially available to wells. Potential well yields of as much as 1,000 gallons per minute are possible in a few of the deeper and thicker parts of some of the buried channel aquifers, but well yields of 10 to 100 gallons per minute are more common. Water generally is very hard, is a calcium bicarbonate type, and has an average dissolved-solids concentration of 400 to 800 milligrams per liter in the shallow buried channel aquifers in Carrol1, Greene, and Guthrie Counties. In the deep buried channel aquifer in Audubon, Crawford, Harrison, Monona, and Shelby counties, the water generally is very hard, is a sodium sulfate or calcium sulfate type, and has an average dissolved-solids concentrations of 3,000 milligrams per liter. The basal Pleistocene aquifer is at the base of the Pleistocene deposits on many bedrock ridges and consists of sand and gravel. Estimated well yields of as much as 500 gallons per minute can be obtained from the aquifer; however, 5 to 50 gallons per minute are more common. Water from the basal Pleistocene aquifer generally is very hard, is a calcium bicarbonate or calcium sulfate type, and has an average dissolved-solids concentration of 1,000 milligrams per liter. The Dakota aquifer consists of the saturated sandstone and gravel units in the Dakota Formation. Isolated erosional remnants of the Dakota Formation form the caps of many bedrock ridges. The Dakota Formation is thickest where the bedrock surface is relatively high and flat, forming an ancient, buried, surface-water divide between southwest and southeast trending buried drainages in Audubon, Carroll, and Guthrie Counties. Sandstone thickness of as much as 150 feet exists in Guthrie County, but an average thickness of 30 feet is more common. Water from wells less than 200 feet deep generally is a calcium bicarbonate type and has an average dissolved-solids concentration of 650 milligrams per liter. Water from wells more than 200 feet deep generally is a calcium sulfate or sodium bicarbonate type and has an average dissolved-solids concentrations of 2,200 milligrams per liter.

Iowa↗