Geology Reports⌕ Search

Geology topics

D. F. Naar

Publications and source records attributed to D. F. Naar.

6 recordsLinked to original sources

Multibeam observations of mine burial near Clearwater, FL, including comparisons to predictions of wave-induced burial

A Kongsberg Simrad EM 3000 multibeam sonar (Kongsberg Simrad, Kongsberg, Norway) was used to conduct a set of six repeat high-resolution bathymetric surveys west of Indian Rocks Beach (IRB), just to the south of Clearwater, FL, between January and March 2003, to observe in situ scour and burial of instrumented inert mines and mine-like cylinders. Three closely located study sites were chosen: two fine-sand sites, a shallow one located in ??? 13 m of water depth and a deep site located in ???14 m of water depth; and a coarse-sand site in ???13 m. Results from these surveys indicate that mines deployed in fine sand are nearly buried within two months of deployment (i.e., they sunk 74.5% or more below the ambient seafloor depth). Mines deployed in coarse sand showed a lesser amount of scour, burying until they present roughly the same hydrodynamic roughness as the surrounding rippled bedforms. These data were also used to test the validity of the Virginia Institute of Marine Science (VIMS, Gloucester Point, VA) 2-D burial model. The model worked well in areas of fine sand, sufficiently predicting burial over the course of the experiment. In the area of coarse sand, the model greatly overpredicted the amount of burial. This is believed to be due to the presence of rippled bedforms around the mines, which affect local bottom morphodynamics and are not accounted for in the model, an issue currently being addressed by the modelers. This paper focuses specifically on two instrumented mines: an acoustic mine located in fine sand and an optical instrumented mine located in coarse sand. ?? 2007 IEEE.

IEEE Journal of Oceanic Engineering↗

Strange bedfellows - A deep-water hermatypic coral reef superimposed on a drowned barrier island; Southern Pulley Ridge, SW Florida platform margin

The southeastern component of a subtle ridge feature extending over 200 km along the western ramped margin of the south Florida platform, known as Pulley Ridge, is composed largely of a non-reefal, coastal marine deposit. Modern biostromal reef growth caps southern Pulley Ridge (SPR), making it the deepest hermatypic reef known in American waters. Subsurface ridge strata are layered, lithified, and display a barrier island geomorphology. The deep-water reef community is dominated by platy scleractinian corals, leafy green algae, and coralline algae. Up to 60% live coral cover is observed in 60-75 m of water, although only 1-2% of surface light is available to the reef community. Vertical reef accumulation is thin and did not accompany initial ridge submergence during the most recent sea-level rise. The delayed onset of reef growth likely resulted from several factors influencing Gulf waters during early stages of the last deglaciation (???14 kyr B.P.) including; cold, low-salinity waters derived from discrete meltwater pulses, high-frequency sea-level fluctuations, and the absence of modern oceanic circulation patterns. Currently, reef growth is supported by the Loop Current, the prevailing western boundary current that impinges upon the southwest Florida platform, providing warm, clear, low-nutrient waters to SPR. The rare discovery of a preserved non-reefal lowstand shoreline capped by rich hermatypic deep-reef growth on a tectonically stable continental shelf is significant for both accurate identification of late Quaternary sea-level position and in better constraining controls on the depth limits of hermatypic reefs and their capacity for adaptation to extremely low light levels. ?? 2004 Elsevier B.V. All rights reserved.

Florida↗

GIS compilation of data collected from the Pulley Ridge Deep Coral Reef region

Pulley Ridge is a chain of drowned barrier islands that extends almost 200 km in 60-90 m water depths (Fig. 1). This drowned ridge is located on the Florida Platform in the southeastern Gulf of Mexico about 250 km west of Cape Sable, Florida (Jarrett and others, 2005). These islands formed during the early Holocene marine transgression approximately 12,000 - 14,000 years before present, and were then submerged by sea level rise and preserved near the outer edge of the Florida Platform. The southern portion of Pulley Ridge is the focus of this study. This area hosts zooxanthellate scleractinian corals, green, red and brown macro algae, and a mix of deep and typically shallow-water tropical fishes. This largely photosynthetic community is unique in that it thrives with less than 5% of the light typically associated with shallow-water reefs with similar fauna. Several factors help to account for the existence of this unique deep-water community. First, the underlying drowned barrier islands provide both elevated topography and lithified substrate for the establishment of the hardbottom community. Second, the region is commonly bathed by the Loop Current, which brings relatively clear and warm water to this area. Third, the ridge's position on the continental shelf places it within the thermocline which provides nutrients to the reef during upwelling (Halley and others, 2003). The USGS has made two proposals to resource managers for the designation of marine protected areas based on the geophysical and photographic data in this report. The proposals describe areas that may require some regulatory protection of marine life utilizing the sea floor (Fig. 1). The first proposal is that the area of greatest hermatypic coral cover (Fig. 1) is considered for future management actions and designated a Habitat Area of Particular Concern (HAPC) by the Gulf of Mexico Fishery Management Council. HAPCs are identified on the basis of habitat level considerations: The importance of the ecological function provided by the habitat. The extent to which the habitat is sensitive to human-induced environmental degradation. Whether and to what extent development activities are or will be stressing the habitat. The rarity of the habitat type. The second proposed area is for Coral Essential Fish Habitat (CEFH, Fig. 1). CEFHs are defined as "those waters and substrate necessary to corals for spawning, breeding, feeding, or growth to maturity." The following definitions are provided for clarification: waters is defined as "aquatic areas and their associated physical, chemical, and biological properties that are used by corals" substrate means "sediment, hard bottom, structures underlying the waters, and associated biological communities" necessary means "the habitat required to support a sustainable population and the managed species' contribution to a healthy ecosystem" spawning,breeding, feeding, or growth to maturity covers the full life cycle of a species. The CEFH shown in Figure 1 is the greatest coral cover in the region as determined by the bottom photo and video transects acquired during this study. This report presents the geophysical and photographic data that were collected to describe the surficial and shallow subsurface geologic framework of the area where these deep-water corals are known to occur. The data types include multibeam bathymetry, sidescan-sonar imagery, images of high-resolution seismic-reflection profiles, and bottom photographs. In addition, the tracklines for the seismic data, locations of bottom photographs and camera drifts, and tracklines along which submersible and remotely operated vehicle (ROV) observations were made are contained in the GIS files accompanying this report. Unfortunately, video footage from the camera drifts, submersible, and ROV cruises is not available on this DVD due to the quantity of data. The bottom photograph data set has been previously published (Cross and others, 2004), however it is included in this publication in an effort to integrate the varying data sets in one location. This integration is accomplished through the GIS data included on this DVD.

Florida↗

Sediment-starved sand ridges on a mixed carbonate/siliciclastic inner shelf off west-central Florida

High-resolution side-scan mosaics, sediment analyses, and physical process data have revealed that the mixed carbonate/siliciclastic, inner shelf of west-central Florida supports a highly complex field of active sand ridges mantled by a hierarchy of bedforms. The sand ridges, mostly oriented obliquely to the shoreline trend, extend from 2 km to over 25 km offshore. They show many similarities to their well-known counterparts situated along the US Atlantic margin in that both increase in relief with increasing water depth, both are oriented obliquely to the coast, and both respond to modern shelf dynamics. There are significant differences in that the sand ridges on the west-central Florida shelf are smaller in all dimensions, have a relatively high carbonate content, and are separated by exposed rock surfaces. They are also shoreface-detached and are sediment-starved, thus stunting their development. Morphological details are highly distinctive and apparent in side-scan imagery due to the high acoustic contrast. The seafloor is active and not a relict system as indicated by: (1) relatively young AMS 14C dates (< 1600 yr BP) from forams in the shallow subsurface (1.6 meters below seafloor), (2) apparent shifts in sharply distinctive grayscale boundaries seen in time-series side-scan mosaics, (3) maintenance of these sharp acoustic boundaries and development of small bedforms in an area of constant and extensive bioturbation, (4) sediment textural asymmetry indicative of selective transport across bedform topography, (5) morphological asymmetry of sand ridges and 2D dunes, and (6) current-meter data indicating that the critical threshold velocity for sediment transport is frequently exceeded. Although larger sand ridges are found along other portions of the west-central Florida inner shelf, these smaller sand ridges are best developed seaward of a major coastal headland, suggesting some genetic relationship. The headland may focus and accelerate the N-S reversing currents. An elevated rock terrace extending from the headland supports these ridges in a shallower water environment than the surrounding shelf, allowing them to be more easily influenced by currents and surface gravity waves. Tidal currents, storm-generated flows, and seasonally developed flows are shore-parallel and oriented obliquely to the NW-SE trending ridges, indicating that they have developed as described by the Huthnance model. Although inner shelf sand ridges have been extensively examined elsewhere, this study is the first to describe them in a low-energy, sediment-starved, dominantly mixed siliciclastic/carbonate sedimentary environment situated on a former limestone platform. ?? 2003 Elsevier B.V. All rights reserved.

Florida↗

Statistical self-similarity of hotspot seamount volumes modeled as self-similar criticality

The processes responsible for hotspot seamount formation are complex, yet the cumulative frequency-volume distribution of hotspot seamounts in the Easter Island/Salas y Gomez Chain (ESC) is found to be well-described by an upper-truncated power law. We develop a model for hotspot seamount formation where uniform energy input produces events initiated on a self-similar distribution of critical cells. We call this model Self-Similar Criticality (SSC). By allowing the spatial distribution of magma migration to be self-similar, the SSC model recreates the observed ESC seamount volume distribution. The SSC model may have broad applicability to other natural systems.

Geophysical Research Letters↗

Morphology and distribution of seamounts surrounding Easter Island

We investigate the morphology and distribution of a seamount population on a section of seafloor influenced by both superfast seafloor spreading and hotspot volcanism. The population under investigation is part of a broad chain of seamounts extending eastward from the East Pacific Rise, near Easter Island. In order to define the morphological variability of the seamounts, basal shape, cross-sectional area, volume, flatness, and flank slope are plotted against height for 383 seamounts with heights greater than 200 m, based on bathymetry data collected by GLORI-B and SeaBeam 2000, during three cruises onboard the R/V Melville in the spring of 1993. Nearly complete swath mapping coverage of the seamounts is available for the analysis of size and shape distribution. We quantitatively describe the seamount population of this active region, in which seamounts cover ???27% of the seafloor, and account for ???4.2% of the total crustal volume. Over 50% of the total volume (61,000 km3) of seamounts used in this study is made up by the 14 largest seamounts, and the remaining volume is made up by the 369 smaller seamounts (>200 m in height). Our analysis indicates there are at least two seamount populations in the Easter Island-Salas y Gomez Island (25??-29??S, 113??-104??W) study area. One population of seamounts is composed of short seamounts (<1200 m in height) with variable flatness from pointy cones to flattened domes (flatness from 0.01 to 0.57) and predominantly steep flanks (slopes from 5?? to 32??). A second population is of massive (>1200 m), shield-like, pointy cones (flatness < 0.2) and gentle slopes (from 5?? to 15??). An exponential maximum likelihood distribution is fit to the binned raw frequency of height and gives a characteristic height of the seamount population of 308??12m and an expected number of seamounts per 1000 km2 of 2.7??0.15. Many seamounts that have different slope and flatness relationships with height are formed next to each other. We speculate that the larger volcanoes (>???1200 m) originate exclusively from a hotspot source, but only a portion of the smaller volcanoes (<???1200 m) are formed from a hotspot source. The remainder would be presumably formed by a normal mantle or mixed source.

Journal of Geophysical Research B: Solid Earth↗