Geology topics

Claire Bouligand

Publications and source records attributed to Claire Bouligand.

6 recordsLinked to original sources

USGS2024

Preliminary ground and airborne-based geophysical mapping and modelling of an active hydrothermal system at Mammoth Lakes, California

Mammoth Lakes, California hosts a productive hydrothermal system within the seismically active south moat of Long Valley Caldera. Surficial evidence of the shallow hydrothermal system includes discrete zones of tree-kill dispersed between Shady Rest Park and the Casa Diablo Geothermal Power Plant (40 MW), as well as east of the power plant. The tree-kill areas are associated with elevated diffuse CO₂ emissions, heated ground, hydrothermal alteration, diffuse soil H₂S emissions, and gas vents. Previous mapping delineates prominent north and northwest trending structures within the south moat along the southwestern edge of the resurgent dome that may accommodate gas and fluid flow at the Shady Rest Park and Basalt Canyon Tree Kill Areas (SRTKA and BCTKA, respectively). Both tree-kill areas are also located along contacts between resurgent rhyolite, mafic lavas, and surficial deposits which may provide additional pathways for gas and fluid migration in the shallow subsurface. Characterizing structure and lithology using geophysical anomalies is critical to determining primary structural controls on the hydrothermal system and the extent of subsurface alteration at these sites. We conducted ground and airborne-based potential field geophysical surveys to map gravity and magnetic anomalies. These anomalies are then used to model subsurface geology, structure, and hydrothermal alteration. Here we present our preliminary geophysical mapping and modelling results at both tree-kill locations. Gravity and magnetic data suggest complex structural intersections are coincident with heated ground and gas emissions at the SRTKA and BCTKA. Hydrothermal systems are often observed or interpreted to exploit fault intersections which can serve as highly permeable pathways for hydrothermal fluid and gas discharge, enabling economic geothermal energy production. Geophysical mapping and modelling are an effective means of investigating such structural complexity at Mammoth Lakes due to the presence of unidentified and concealed structures.

California↗

USGS2023

Development of small uncrewed aerial systems for multi-instrument geophysical data acquisition in active geothermal systems

Small Uncrewed Aerial Systems (sUAS) serve as critical platforms for geophysical data collection at an intermediate scale between lower resolution, regional datasets collected via crewed aerial surveys, and high resolution, but spatially sparse sampling of ground-based data collection methods. Advances in sensor design and sUAS capabilities have led to rapid advances in the amount and type of geophysical data that can be acquired using sUAS-based survey designs (Gavazzi et al., 2019). Here we showcase the utility of a single sUAS (the Matrice 600 Pro and accompanying sensor package) that collects magnetic, thermal infra-red (TIR) and gas (CO2, SO2, H2S, water vapor) data for use in geothermal resource exploration and monitoring, with case studies in eastern California and Iceland. The work highlights the flexibility of modern sUAS systems for single-team acquisition of multiple independent but coupled geophysical data which allow for a multidisciplinary approach to geothermal systems research. We summarize the workflows involved in collecting each dataset as well as several common issues encountered both during data collection and data processing.

Conference Paper↗

USGS2021

Magnetic surveys with unmanned aerial systems: Software for assessing and comparing the accuracy of different sensor systems, suspension designs and compensation methods

A typical problem for magnetic surveys with small Unmanned Aerial Systems (sUAS) is the heading error caused by undesired magnetic signals that originate from the aircraft. This can be addressed by suspending the magnetometers on sufficiently long tethers. However, tethered payloads require skilled pilots and are difficult to fly safely. Alternatively, the magnetometer can be fixed on the aircraft. In this case, aircraft magnetic signals are removed from the recordings with a process referred to as magnetic compensation, which requires parameters estimated from calibration flights flown in an area with magnetically low-gradients prior to the survey. We present open-source software fully written in Python to process data and compute compensations for two fundamentally different magnetometer systems (scalar and vector). We used the software to compare the precision of two commercially available systems by flying dense grid patterns over a 135 × 150 m area using different suspension configurations. The accuracy of the magnetic recordings is assessed using both standard deviations of the calibration pattern and tie-line cross-over differences from the survey. After compensation, the vector magnetometer provides the lowest heading error. However, the magnetic field intensity recovered with this system is relative and needs to be adjusted with absolute data if absolute intensity values are needed. Overall, the highest accuracy of all suspension configurations tested was obtained by fixing the magnetometer 0.5 m below the sUAS onto a self-built carbon-fiber frame, which also offered greater stability and allowed fully autonomous flights in a wide range of conditions.

Geochemistry, Geophysics, Geosystems (G-Cubed)↗

USGS2020

Geological and thermal control of the hydrothermal system in northern Yellowstone Lake: Inferences from high resolution magnetic surveys

A multiscale magnetic survey of the northern basin of Yellowstone Lake was undertaken in 2016 as part of the Hydrothermal Dynamics of Yellowstone Lake Project (HD‐YLAKE)—a broad research effort to characterize the cause‐and‐effect relationships between geologic and environmental processes and hydrothermal activity on the lake floor. The magnetic survey includes lake surface, regional aeromagnetic, and near‐bottom autonomous underwater vehicle (AUV) data. The study reveals a strong contrast between the northeastern lake basin, characterized by a regional magnetic low punctuated by stronger local magnetic lows, many of which host hydrothermal vent activity, and the northwestern lake basin with higher‐amplitude magnetic anomalies and no obvious hydrothermal activity or punctuated magnetic lows. The boundary between these two regions is marked by a steep gradient in heat flow and magnetic values, likely reflecting a significant structure within the currently active ~20‐km‐long Eagle Bay‐Lake Hotel fault zone that may be related to the ~2.08‐Ma Huckleberry Ridge caldera rim. Modeling suggests that the broad northeastern magnetic low reflects both a shallower Curie isotherm and widespread hydrothermal activity that has demagnetized the rock. Along the western lake shoreline are sinuous‐shaped, high‐amplitude magnetic anomaly highs, interpreted as lava flow fronts of upper units of the West Thumb rhyolite. The AUV magnetic survey shows decreased magnetization at the periphery of the active Deep Hole hydrothermal vent. We postulate that lower magnetization in the outer zone results from enhanced hydrothermal alteration of rhyolite by hydrothermal condensates while the vapor‐dominated center of the vent is less altered.

Wyoming↗

USGS2019

Heat and mass transport in a vapor-dominated hydrothermal area in Yellowstone National Park, USA: Inferences from magnetic, electrical, electromagnetic, subsurface temperature and diffuse CO2 flux measurements

Vapor‐dominated hydrothermal systems are characterized by localized and elevated heat and gas flux. In these systems, steam and gas ascend from a boiling water reservoir, steam condenses beneath a low‐permeability cap layer, and liquid water descends, driven by gravity (“heat pipe” model). We combine magnetic, electromagnetic, and geoelectrical methods and CO 2 flux and subsurface temperature measurements in the Solfatara Plateau Thermal Area in the Yellowstone Caldera to address several fundamental questions: (1) What are the structural and/or lithological controls on heat and mass transport in vapor‐dominated areas? (2) What is the geometry and size of convecting multiphase thermal plumes? (3) Are thermal plumes associated with subsurface rock alteration and demagnetization? Magnetic and electromagnetic data inversions suggest an asymmetric 50‐ to 100‐m thick basin of glacial deposits with the thickest part adjacent to the margin of a rhyolite flow. The 3‐D electrical conductivity model in the glacial basin reveals a narrow vertical conductor interpreted as a focused multiphase plume, which coincides at the ground surface with the heat and CO 2 flux maxima. The magnetic data suggest that destruction of magnetic minerals due to rock alteration associated with the hydrothermal plume occurs mainly near the ground surface. We propose a model where the buoyant multiphase plume forms in response to decompression, boiling, and phase separation of pressurized thermal groundwater that discharges from the brecciated base of a rhyolite flow into the basin of glacial deposits. Results from multiphase groundwater flow and heat transport numerical simulations corroborate the first‐order characteristics of this model.

Wyoming↗

USGS2009

Geophysical Studies in the Vicinity of the Warner Mountains and Surprise Valley, Northeast California, Northwest Nevada, and Southern Oregon

From May 2006 to August 2007, the U.S. Geological Survey (USGS) collected 793 gravity stations, about 102 line-kilometers of truck-towed and ground magnetometer data, and about 325 physical-property measurements in northeastern California, northwestern Nevada, and southern Oregon. Gravity, magnetic, and physical-property data were collected to study regional crustal structures and geology as an aid to understanding the geologic framework of the Surprise Valley geothermal area and, in general, geothermal systems throughout the Great Basin. The Warner Mountains and Surprise Valley mark the transition from the extended Basin and Range province to the unextended Modoc Plateau. This transition zone, in the northwestern corner of the Basin and Range, is relatively diffuse compared to other, more distinct boundaries, such as the Wasatch front in Utah and the eastern Sierran range front. In addition, this transition zone is the site of a geothermal system with potential for development, and previous studies have revealed a complex structural setting consisting of several obliquely oriented fault sets. As a result, this region has been the subject of several recent geological and geophysical investigations. The gravity and magnetic data presented here support and supplement those studies, and although the study area is composed predominantly of Tertiary volcanic rocks of the Modoc Plateau rocks, the physical properties of these and others rocks create a distinguishable pattern of gravity and magnetic anomalies that can be used to infer subsurface geologic structure.

Open-File Report↗