Geology topics

Christopher P. Weis

Publications and source records attributed to Christopher P. Weis.

9 recordsLinked to original sources

USGS2023

Bottled water contaminant exposures and potential human effects

Bottled water (BW) consumption in the United States and globally has increased amidst heightened concern about environmental contaminant exposures and health risks in drinking water supplies, despite a paucity of directly comparable, environmentally-relevant contaminant exposure data for BW. This study provides insight into exposures and cumulative risks to human health from inorganic/organic/microbial contaminants in BW. Methods BW from 30 total domestic US (23) and imported (7) sources, including purified tapwater (7) and spring water (23), were analyzed for 3 field parameters, 53 inorganics, 465 organics, 14 microbial metrics, and in vitro estrogen receptor (ER) bioactivity. Health-benchmark-weighted cumulative hazard indices and ratios of organic-contaminant in vitro exposure-activity cutoffs were assessed for detected regulated and unregulated inorganic and organic contaminants. Results 48 inorganics and 45 organics were detected in sampled BW. No enforceable chemical quality standards were exceeded, but several inorganic and organic contaminants with maximum contaminant level goal(s) (MCLG) of zero (no known safe level of exposure to vulnerable sub-populations) were detected. Among these, arsenic, lead, and uranium were detected in 67 %, 17 %, and 57 % of BW, respectively, almost exclusively in spring-sourced samples not treated by advanced filtration. Organic MCLG exceedances included frequent detections of disinfection byproducts (DBP) in tapwater-sourced BW and sporadic detections of DBP and volatile organic chemicals in BW sourced from tapwater and springs. Precautionary health-based screening levels were exceeded frequently and attributed primarily to DBP in tapwater-sourced BW and co-occurring inorganic and organic contaminants in spring-sourced BW. Conclusion The results indicate that simultaneous exposures to multiple drinking-water contaminants of potential human-health concern are common in BW. Improved understandings of human exposures based on more environmentally realistic and directly comparable point-of-use exposure characterizations, like this BW study, are essential to public health because drinking water is a biological necessity and, consequently, a high-vulnerability vector for human contaminant exposures.

Environment International↗

USGS2023

Exposures and potential health implications of contaminant mixtures in linked source water, finished drinking water, and tapwater from public-supply drinking water systems in Minneapolis/St. Paul area, USA

Continued improvements in drinking-water quality characterization and treatment/distribution infrastructure are required to address the expanding number of documented environmental contaminants. To better understand the variability in contaminant exposures from the drinking water resource (surface and groundwater), through the distribution process, to the point-of-use (tapwater), in 2019 a synoptic assessment of broad chemical exposures was conducted in system-specific source waters, finished drinking water and service-area tapwater from 10 drinking water treatment facilities in the greater Minneapolis/St. Paul area of Minnesota, United States. Source water, finished water (collected pre-distribution in the treatment facility), and tapwater samples were analyzed for 465 unique organic compounds, 34 inorganic constituents, and 3 field parameters as well as in vitro estrogen, androgen, and glucocorticoid bioactivities. Mixtures of organic and inorganic contaminants were prevalent in source water, finished water, and tapwater samples, indicating the continued need for broad assessments of mixed contaminant exposures to characterize potential drinking-water human health outcomes. Contaminant concentrations were similar among drinking water sources and no exceedances of Environmental Protection Agency maximum contaminant level(s) (MCL) were observed in any treated sample (finished water or tapwater) in this study. No treated sample contained estrogenic, androgenic, or glucocorticoid activity at concentrations that may cause adverse human health effects. However, there were multiple exceedances of non-enforceable MCL goal(s) (MCLG), and other health advisories combined with frequent exceedances of benchmark-based hazard indices in both finished water and tapwater samples. These results indicate that exposure to contaminant mixtures is a potential public health concern underscoring our continued efforts to assess contaminant mixture exposures at the drinking-water point of consumption using a broad analytical scope.

Minnesota↗

USGS2022

Tapwater exposures, effects potential, and residential risk management in Northern Plains Nations

In the United States (US), private-supply tapwater (TW) is rarely monitored. This data gap undermines individual/community risk-management decision-making, leading to an increased probability of unrecognized contaminant exposures in rural and remote locations that rely on private wells. We assessed point-of-use (POU) TW in three northern plains Tribal Nations, where ongoing TW arsenic (As) interventions include expansion of small community water systems and POU adsorptive-media treatment for Strong Heart Water Study participants. Samples from 34 private-well and 22 public-supply sites were analyzed for 476 organics, 34 inorganics, and 3 in vitro bioactivities. 63 organics and 30 inorganics were detected. Arsenic, uranium (U), and lead (Pb) were detected in 54%, 43%, and 20% of samples, respectively. Concentrations equivalent to public-supply maximum contaminant level(s) (MCL) were exceeded only in untreated private-well samples (As 47%, U 3%). Precautionary health-based screening levels were exceeded frequently, due to inorganics in private supplies and chlorine-based disinfection byproducts in public supplies. The results indicate that simultaneous exposures to co-occurring TW contaminants are common, warranting consideration of expanded source, point-of-entry, or POU treatment(s). This study illustrates the importance of increased monitoring of private-well TW, employing a broad, environmentally informative analytical scope, to reduce the risks of unrecognized contaminant exposures.

North Dakota, South Dakota↗

USGS2021

Public and private tapwater: Comparative analysis of contaminant exposure and potential risk, Cape Cod, Massachusetts, USA

Background Humans are primary drivers of environmental contamination worldwide, including in drinking-water resources. In the United States (US), federal and state agencies regulate and monitor public-supply drinking water while private-supply monitoring is rare; the current lack of directly comparable information on contaminant-mixture exposures and risks between private- and public-supplies undermines tapwater (TW) consumer decision-making. Methods We compared private- and public-supply residential point-of-use TW at Cape Cod, Massachusetts, where both supplies share the same groundwater source. TW from 10 private- and 10 public-supply homes was analyzed for 487 organic, 38 inorganic, 8 microbial indicators, and 3 in vitro bioactivities. Concentrations were compared to existing protective health-based benchmarks, and aggregated Hazard Indices (HI) of regulated and unregulated TW contaminants were calculated along with ratios of in vitro exposure-activity cutoffs. Results Seventy organic and 28 inorganic constituents were detected in TW. Median detections were comparable, but median cumulative concentrations were substantially higher in public supply due to 6 chlorine–disinfected samples characterized by disinfection byproducts and corresponding lower heterotrophic plate counts. Public-supply applicable maximum contaminant (nitrate) and treatment action (lead and copper) levels were exceeded in private-supply TW samples only. Exceedances of health-based HI screening levels of concern were common to both TW supplies. Discussion These Cape Cod results indicate comparable cumulative human-health concerns from contaminant exposures in private- and public-supply TW in a shared source-water setting. Importantly, although this study’s analytical coverage exceeds that currently feasible for water purveyors or homeowners, it nevertheless is a substantial underestimation of the full breadth of contaminant mixtures documented in the environment and potentially present in drinking water. Conclusion Regardless of the supply, increased public engagement in source-water protection and drinking-water treatment, including consumer point-of-use treatment, is warranted to reduce risks associated with long-term TW contaminant exposures, especially in vulnerable populations.

Massachusetts↗

USGS2021

Pilot-scale expanded assessment of inorganic and organic tapwater exposures and predicted effects in Puerto Rico, USA

A pilot-scale expanded target assessment of mixtures of inorganic and organic contaminants in point-of-consumption drinking water (tapwater, TW) was conducted in Puerto Rico (PR) to continue to inform TW exposures and corresponding estimations of cumulative human-health risks across the US. In August 2018, a spatial synoptic pilot assessment of than 524 organic, 37 inorganic, and select microbiological contaminant indicators was conducted in 14 locations (7 home; 7 commercial) across PR. A follow-up 3-day temporal assessment of TW variability was conducted in December 2018 at two of the synoptic locations (1 home, 1 commercial) and included daily pre- and post-flush samples. Concentrations of regulated and unregulated TW contaminants were used to calculate cumulative in vitro bioactivity ratios and Hazard Indices (HI) based on existing human-health benchmarks. Synoptic results confirmed that human exposures to inorganic and organic contaminant mixtures, which are rarely monitored together in drinking water at the point of consumption, occurred across PR and consisted of elevated concentrations of inorganic contaminants (e.g., lead, copper), disinfection byproducts (DBP), and to a lesser extent per/polyfluoroalkyl substances (PFAS) and phthalates. Exceedances of human-health benchmarks in every synoptic TW sample support further investigation of the potential cumulative risk to vulnerable populations in PR and emphasize the importance of continued broad characterization of drinking-water exposures at the tap with analytical capabilities that better represent the complexity of both inorganic and organic contaminant mixtures known to occur in ambient source waters. Such health-based monitoring data are essential to support public engagement in source water sustainability and treatment and to inform consumer point-of-use treatment decision making in PR and throughout the US.

Puerto Rico↗

USGS2020

Mixed organic and inorganic tapwater exposures and potential effects in greater Chicago area, USA

Safe drinking water at the point of use (tapwater, TW) is a public-health priority. TW exposures and potential human-health concerns of 540 organics and 35 inorganics were assessed in 45 Chicago area United States (US) homes in 2017. No US Environmental Protection Agency (EPA) enforceable Maximum Contaminant Level(s) (MCL) were exceeded in any residential or water treatment plant (WTP) pre-distribution TW sample. Ninety percent (90%) of organic analytes were not detected in treated TW, emphasizing the high quality of the Lake Michigan drinking-water source and the efficacy of the drinking-water treatment and monitoring. Sixteen (16) organics were detected in >25% of TW samples, with about 50 detected at least once. Low-level TW exposures to unregulated disinfection byproducts (DBP) of emerging concern, per/polyfluoroalkyl substances (PFAS), and three pesticides were ubiquitous. Common exceedances of non-enforceable EPA MCL Goal(s) (MCLG) of zero for arsenic [As], lead [Pb], uranium [U]), bromodichloromethane, and tribromomethane suggest potential human health concerns and emphasize the continuing need for improved understanding of cumulative effects of low-concentration mixtures on vulnerable sub-populations. Because DBP dominated TW organics, residential TW concentrations are potentially predictable with expanded pre-distribution DBP monitoring. However, several TW chemicals, notably Pb and several infrequently detected organic compounds, were not readily explained by pre distribution samples, illustrating the need for continued broad inorganic/organic TW characterization to support consumer assessment of acceptable risk and point-of-use treatment options.

Illinois↗

USGS2018

Reconnaissance of mixed organic and inorganic chemicals in private and public supply tapwaters at selected residential and workplace sites in the United States

Safe drinking water at the point-of-use (tapwater, TW) is a United States public health priority. Multiple lines of evidence were used to evaluate potential human health concerns of 482 organics and 19 inorganics in TW from 13 (7 public supply, 6 private well self-supply) home and 12 (public supply) workplace locations in 11 states. Only uranium (61.9 μg L –1 , private well) exceeded a National Primary Drinking Water Regulation maximum contaminant level (MCL: 30 μg L –1 ). Lead was detected in 23 samples (MCL goal: zero). Seventy-five organics were detected at least once, with median detections of 5 and 17 compounds in self-supply and public supply samples, respectively (corresponding maxima: 12 and 29). Disinfection byproducts predominated in public supply samples, comprising 21% of all detected and 6 of the 10 most frequently detected. Chemicals designed to be bioactive (26 pesticides, 10 pharmaceuticals) comprised 48% of detected organics. Site-specific cumulative exposure–activity ratios (∑ EAR ) were calculated for the 36 detected organics with ToxCast data. Because these detections are fractional indicators of a largely uncharacterized contaminant space, ∑ EAR in excess of 0.001 and 0.01 in 74 and 26% of public supply samples, respectively, provide an argument for prioritized assessment of cumulative effects to vulnerable populations from trace-level TW exposures.

Environmental Science & Technology↗

USGS2018

Concentrations of lead and other inorganic constituents in samples of raw intake and treated drinking water from the municipal water filtration plant and residential tapwater in Chicago, Illinois, and East Chicago, Indiana, July–December 2017

The U.S. Geological Survey (USGS) Environmental Health Mission Area (EHMA) is providing comprehensive science on sources, movement, and transformation of contaminants and pathogens in watershed and aquifer drinking-water supplies and in built water and wastewater infrastructure (referred to as the USGS Water and Wastewater Infrastructure project) in the Greater Chicago Area and elsewhere in the United States, to fill data gaps identified by stakeholders and collaborators in drinking water and public health. EHMA Water and Wastewater Infrastructure research specifically provides insight into natural factors in the environment as well as those water-infrastructure components and processes (such as source-water corrosivity, treatment, plumbing, and so forth) that might influence human exposure to chemical and microbial contaminants at the residential tap. This infrastructure-exposure research role is fulfilled uniquely by the USGS and not by the U.S. Environmental Protection Agency (EPA), other agencies, or municipalities that focus on regulatory and policy activities and related compliance. The USGS approach to assessing the possible links between human health and chemical contaminant and pathogen exposure in drinking water is conducted in collaboration with public health experts and includes comprehensive characterization of the presence/absence and concentrations of more than 500 organic and 27 inorganic chemical constituents at the point of use (tap). Laboratory results for lead and other inorganic contaminants in Chicago, Illinois, and East Chicago, Indiana, residential tapwater are being released to ensure the timely release of quality-assured data to participants in the study. Concentrations of lead and other inorganic constituents were assessed in drinking water at the point of use (kitchen tap or filter) in 45 residential locations and in two locations within each of the two Chicago water purification plants and the two East Chicago water filtration plants during July–December 2017. Three methods were used for analyzing lead. The most sensitive method had a reporting limit of 0.020 micrograms per liter (µg/L). When using the most sensitive analytical method, lead was detected in 39 of 45 residential tapwater samples, with concentrations ranging from less than 0.020 µg/L to 5.31 µg/L (median of the detected values = 0.481 µg/L). Concentrations of lead also were detected in Lake Michigan intake water at all water purification/filtration plant facilities at concentrations ranging from 0.083 to 0.330 µg/L, but were not detected above the reporting limit in any samples of treated, pre-distribution drinking water at any of the water purification/filtration plant facilities. Because the USGS Water and Wastewater Infrastructure project in the Greater Chicago Area is focused on the potential human exposure to a broad suite of organic and inorganic contaminants in drinking water and is not focused specifically on lead, the sampling protocol did not include “first-draw,” stagnant sampling and samples were collected with point-of-use treatment in place, if present. Thus, the lead results reported herein are not appropriate for assessment of compliance with the EPA 1991 Lead and Copper Rule. Information resources for lead mitigation and water filtration are provided.

Illinois, Indiana↗

USGS2018

Methods used for the collection and analysis of chemical and biological data for the Tapwater Exposure Study, United States, 2016–17

In 2016, the U.S. Geological Survey (USGS) Environmental Health Mission Area, initiated the Tapwater Exposure Study as part of an infrastructure project to assess human exposure to potential threats from complex mixtures of contaminants. In the pilot phase (2016), samples were collected from 11 States throughout the United States, and in the second phase (2017), the study focused on the Greater Chicago area, including North and South Chicago, Illinois, and East Chicago, Indiana. Residential tapwater samples were collected at private residences during both phases, and during the first phase, samples were collected from Federal office buildings and from one office 19-liter water-bottle source. During the second phase, raw intake and treated (pre-distributional) water samples also were collected from four drinking-water treatment facilities in the Greater Chicago area. Samples were sent to laboratories at the USGS, U.S. Environmental Protection Agency, National Institute of Environmental Health Sciences, and Colorado School of Mines Center for Environmental Risk Assessment, for potential drinking-water pathogens, chemical, and bioassay analyses. These analyses included more than 400 chemicals such as trace elements, steroid hormones, pharmaceuticals, volatile organic compounds, pesticides, per- and polyfluorinated alkyl substances, cyanotoxins, and other organic compounds. The in vitro bioassay analyses included estrogen, androgen, and glucocorticoid receptor activity.

Open-File Report↗