Geology topics

Christopher B. DuRoss

Publications and source records attributed to Christopher B. DuRoss.

At least 37 records · Page 2Linked to original sources

USGS2022

Portable optically stimulated luminescence age map of a paleoseismic exposure

The quality and quantity of geochronologic data used to constrain the history of major earthquakes in a region exerts a first-order control on the accuracy of seismic hazard assessments that affect millions of people. However, evaluations of geochronological data are limited by uncertainties related to inherently complex depositional processes that may vary spatially and temporally. To improve confidence in models of earthquake timing, we use a high-density suite of radiocarbon and optically stimulated luminescence (OSL) ages with a grid of 342 portable OSL samples to explore spatiotemporal trends in geochronological data across an exemplary normal fault colluvial wedge exposure. The data reveal a two-dimensional age map of the paleoseismic exposure and demonstrate how vertical and horizontal trends in age relate to dominant sedimentary facies and soil characteristics at the site. Portable OSL data provide critical context for the interpretation of 14 C and OSL ages, show that geochronologic age boundaries between pre- and post-earthquake deposits do not match stratigraphic contacts, and provide the basis for selecting alternate Bayesian models of earthquake timing. Our results demonstrate the potential to use emergent, portable OSL methods to dramatically improve paleoseismic constraints on earthquake timing.

Utah↗

USGS2022

Luminescence sediment tracing reveals the complex dynamics of colluvial wedge formation

Paleoearthquake studies that inform seismic hazard rely on assumptions of sediment transport that remain largely untested. Here, we test a widespread conceptual model and a new numerical model on the formation of colluvial wedges, a key deposit used to constrain the timing of paleoearthquakes. We perform this test by applying luminescence, a sunlight-sensitive sediment tracer, at a field site displaying classic colluvial wedge morphostratigraphy. The model and data comparison reveals complex sediment transport processes beyond the predictions of either conceptual or numerical models, including periods of simultaneous debris and wash facies forming processes, erosion, and reworking. These processes could lead to preservation bias, such as incomplete or overinterpretable paleoearthquake records, given the right environmental conditions. Attention to the site-specific mechanics of fault zone depositional systems, such as via sediment tracing, may buffer against the possible effects of preservation bias on paleoseismic study.

Science↗

USGS2021

Quick and dirty (and accurate) 3-D paleoseismic trench models using coded scale bars

Structure‐from‐motion (SfM) modeling has dramatically increased the speed of generating geometrically accurate orthophoto mosaics of paleoseismic trenches, but some aspects of this technique remain time and labor intensive. Model accuracy relies on control points to establish scale, reduce distortion, and orient 3D models. Traditional SfM methods use total station or Global Navigation Satellite System (GNSS) surveys to constrain models, but collecting control points along a vertical trench wall is often inhibited by poor line of sight to the survey sensor or limited sky view and requires many hours in the field and office. We used physical scale bars printed with coded targets to constrain SfM models of a dusty, 46‐m‐long trench excavation across the Teton fault (Wyoming, U.S.A.). We present a workflow for generating quick and accurate 3D SfM models and orthophoto mosaics and compare the effectiveness of using scale bar, GNSS, and total‐station control in the models. Our results show that the scale bar model deviates from total station survey points by an average of 3.1 cm (maximum of 5.3 cm). In addition, the scale‐bar model only deviates an average of 1.7 cm (maximum 3.5 cm) when compared to the best model alternative, the SfM model controlled by the total station survey. Scale bars eliminate several hours needed to collect and incorporate control points from total station or GNSS surveys and significantly simplify the workflow, at the cost of slightly increased 3D model and orthophoto mosaic error. Our results further suggest that trench models can be constrained with at least four physical scale bars, but using five to six physical scale bars provides redundant control for field deployment and model optimization. The scale bar method for paleoseismic trenches proves to be portable and fast, minimizes the need for specialized survey equipment, and maintains model accuracy needed for mapping trench walls.

Seismological Research Letters↗

USGS2021

Geomorphic expression and slip rate of the Fairweather fault, southeast Alaska, and evidence for predecessors of the 1958 rupture

Active traces of the southern Fairweather fault were revealed by light detection and ranging (lidar) and show evidence for transpressional deformation between North America and the Yakutat block in southeast Alaska. We map the Holocene geomorphic expression of tectonic deformation along the southern 30 km of the Fairweather fault, which ruptured in the 1958 moment magnitude 7.8 earthquake. Digital maps of surficial geology, geomorphology, and active faults illustrate both strike-slip and dip-slip deformation styles within a 10°–30° double restraining bend where the southern Fairweather fault steps offshore to the Queen Charlotte fault. We measure offset landforms along the fault and calibrate legacy 14 C data to reassess the rate of Holocene strike-slip motion (≥49 mm/yr), which corroborates published estimates that place most of the plate boundary motion on the Fairweather fault. Our slip-rate estimates allow a component of oblique-reverse motion to be accommodated by contractional structures west of the Fairweather fault consistent with geodetic block models. Stratigraphic and structural relations in hand-dug excavations across two active fault strands provide an incomplete paleoseismic record including evidence for up to six surface ruptures in the past 5600 years, and at least two to four events in the past 810 years. The incomplete record suggests an earthquake recurrence interval of ≥270 years—much longer than intervals <100 years implied by published slip rates and expected earthquake displacements. Our paleoseismic observations and map of active traces of the southern Fairweather fault illustrate the complexity of transpressional deformation and seismic potential along one of Earth's fastest strike-slip plate boundaries.

Alaska↗

USGS2021

The Traverse Ridge paleoseismic site and ruptures crossing the boundary between the Provo and Salt Lake City segments of the Wasatch fault zone, Utah, United States

How structural segment boundaries modulate earthquake behavior is an important scientific and societal question, especially for the Wasatch fault zone (WFZ) where urban areas lie along multiple fault segments. The extent to which segment boundaries arrest ruptures, host moderate magnitude earthquakes, or transmit ruptures to adjacent fault segments is critical for understanding seismic hazard. To help address this outstanding issue, we conducted a paleoseismic investigation at the Traverse Ridge paleoseismic site (TR site) along the ∼7-km-long Fort Canyon segment boundary, which links the Provo (59 km) and Salt Lake City (40 km) segments of the WFZ. At the TR site, we logged two trenches which were cut across sub-parallel traces of the fault, separated by ∼175 m. Evidence from these exposures leads us to infer that at least 3 to 4 earthquakes have ruptured across the segment boundary in the Holocene. Radiocarbon dating of soil material developed below and above fault scarp colluvial packages and within a filled fissure constrains the age of the events. The most recent event ruptured the southern fault trace between 0.2 and 0.4 ka, the penultimate event ruptured the northern fault trace between 0.6 and 3.4 ka, and two prior events occurred between 1.4 and 6.2 ka (on the southern fault trace) and 7.2 and 8.1 ka (northern fault trace). Colluvial wedge heights of these events ranged from 0.7 to 1.2 m, indicating the segment boundary experiences surface ruptures with more than 1 m of vertical displacement. Given these estimates, we infer that these events were greater than Mw 6.7, with rupture extending across the entire segment boundary and portions of one or both adjacent fault segments. The Holocene recurrence of events at the TR site is lower than the closest paleoseismic sites at the adjacent fault segment endpoints. The contrasts in recurrence rates observed within 15 km of the Fort Canyon fault segment boundary may be explained conceptually by a leaky segment boundary model which permits spillover events, ruptures centered on the segment boundary, and segmented ruptures. The TR site demonstrates the utility of paleoseismology within segment boundaries which, through corroboration of displacement data, can demonstrate rupture connectivity between fault segments and test the validity of rupture models.

Utah↗

USGS2021

Coseismic surface displacement in the 2019 ridgecrest earthquakes: Comparison of field measurements and optical image correlation results

A fundamental topic in earthquake studies is understanding the extent to which fault rupture at the surface is localized on primary fault strands as opposed to distributed tens to hundreds of meters away from primary ruptures through off‐fault deformation (OFD) via a combination of discrete secondary faulting and bulk deformation. The 2019 Ridgecrest, CA M w 6.4 and M w 7.1 earthquakes provide an opportunity to explore this problem via comparison of published field‐based and mostly on‐fault offset measurements, with new lateral displacement measurements made over length scales of hundreds of meters across the primary rupture using WorldView satellite images collected before and after the earthquakes. A mean fit to the field observations underestimates net slip (pixel‐correlation results) by an average of 0.4 m along the M w 6.4 rupture (∼41% of net left‐lateral displacement) and 0.7 m along the M w 7.1 rupture (∼65% of net right‐lateral displacement). We attribute these differences to substantial OFD along the lengths of the M w 6.4 (∼59%) and M w 7.1 (∼35%) ruptures. A maximum fit to the field observations provides an improved match to the pixel correlation results (difference of 0.1–0.2 m or ∼76%–98% of net displacement). OFD may in part depend on displacement magnitude, where locations along the rupture with smaller displacements (<2 m) are characterized by a greater percentage of OFD. Furthermore, OFD increases with rupture zone width, especially at the scale of individual rupture strands (hundreds of meters). These findings contribute to a growing understanding of the important role of OFD in accommodating deformation near the surface.

California↗

USGS2021

A maximum rupture model for the central and southern Cascadia subduction zone—reassessing ages for coastal evidence of megathrust earthquakes and tsunamis

A new history of great earthquakes (and their tsunamis) for the central and southern Cascadia subduction zone shows more frequent (17 in the past 6700 yr) megathrust ruptures than previous coastal chronologies. The history is based on along-strike correlations of Bayesian age models derived from evaluation of 554 radiocarbon ages that date earthquake evidence at 14 coastal sites. We reconstruct a history that accounts for all dated stratigraphic evidence with the fewest possible ruptures by evaluating the sequence of age models for earthquake or tsunami contacts at each site, comparing the degree of temporal overlap of correlated site age models, considering evidence for closely spaced earthquakes at four sites, and hypothesizing only maximum-length megathrust ruptures. For the past 6700 yr, recurrence for all earthquakes is 370–420 yr. But correlations suggest that ruptures at ∼1.5 ka and ∼1.1 ka were of limited extent (<400 km). If so, post-3-ka recurrence for ruptures extending throughout central and southern Cascadia is 510–540 yr. But the range in the times between earthquakes is large: two instances may be ∼50 yr, whereas the longest are ∼550 and ∼850 yr. The closely spaced ruptures about 1.6 ka may illustrate a pattern common at subduction zones of a long gap ending with a great earthquake rupturing much of the subduction zone, shortly followed by a rupture of more limited extent. The ruptures of limited extent support the continued inclusion of magnitude-8 earthquakes, with longer ruptures near magnitude 9, in assessments of seismic hazard in the region.

British Columbia, Washington, Oregon, California↗

USGS2020

Holocene paleoseismology of the Steamboat Mountain Site: Evidence for full‐Llngth rupture of the Teton Fault, Wyoming

The 72‐km‐long Teton fault in northwestern Wyoming is an ideal candidate for reconstructing the lateral extent of surface‐rupturing earthquakes and testing models of normal‐fault segmentation. To explore the history of earthquakes on the northern Teton fault, we hand‐excavated two trenches at the Steamboat Mountain site, where the east‐dipping Teton fault has vertically displaced west‐sloping alluvial‐fan surfaces. The trenches exposed glaciofluvial, alluvial‐fan, and scarp‐derived colluvial sediments and stratigraphic and structural evidence of two surface‐rupturing earthquakes (SM1 and SM2). A Bayesian geochronologic model for the site includes three optically stimulated luminescence ages ( ⁠ ∼ 12 – 17 ka ⁠ ) for the glaciofluvial units and 16 radiocarbon ages ( ⁠ ∼ 1.2 – 8.6 ka ⁠ ) for the alluvial‐fan and colluvial units and constrains SM1 and SM2 to 5.5 ± 0.2 ka , 1 σ (5.2–5.9 ka, 95%) and 9.7 ± 0.9 ka , 1 σ (8.5–11.5 ka, 95%), respectively. Structural, stratigraphic, and geomorphic relations yield vertical displacements for SM1 ( ⁠ 2.0 ± 0.6 m , 1 σ ⁠ ) and SM2 ( ⁠ 2.0 ± 1.0 m , 1 σ ⁠ ). The Steamboat Mountain paleoseismic chronology overlaps temporally with earthquakes interpreted from previous terrestrial and lacustrine paleoseismic data along the fault. Integrating these data, we infer that the youngest Teton fault rupture occurred at ∼ 5.3 ka ⁠ , generated 1.7 ± 1.0 m , 1 σ of vertical displacement along 51–70 km of the fault, and had a moment magnitude ( ⁠ M w ⁠ ) of ∼ 7.0 – 7.2 ⁠ . This rupture was apparently unimpeded by structural complexities along the Teton fault. The integrated chronology permits a previous full‐length rupture at ∼ 10 ka and possible partial ruptures of the fault at ∼ 8 – 9 ka ⁠ . To reconcile conflicting terrestrial and lacustrine paleoseismic data, we propose a hypothesis of alternating full‐ and partial‐length ruptures of the Teton fault, including M w ∼ 6.5 – 7.2 earthquakes every ∼ 1.2 ky ⁠ . Additional paleoseismic data for the northern and central sections of the fault would serve to test this bimodal rupture hypothesis.

Wyoming↗

USGS2020

Seismic reflection imaging of the low-angle Panamint normal fault system, eastern California

Shallowly dipping (<30°) low‐angle normal faults (LANFs) have been documented globally; however, examples of active LANFs in continental settings are limited. The western margin of the Panamint Range in eastern California is defined by a LANF that dips west beneath Panamint Valley and has evidence of Quaternary motion. In addition, high‐angle dextral‐oblique normal faults displace middle to late Quaternary alluvial fans near the range front. To image shallow (<1 km depth), crosscutting relationships between the low‐ and high‐angle faults along the range front, we acquired two high‐resolution P wave seismic reflection profiles. The northern, 4.6‐km‐long profile crosses the 2‐km‐wide Wildrose graben and the southern, 0.8‐km‐long profile extends onto the Panamint Valley playa, ~7.5 km S of Ballarat, CA. The profile across the Wildrose graben reveals a robust, low‐angle reflector interpreted to represent the LANF separating Plio‐Pleistocene alluvial fanglomerate and Proterozoic metasedimentary deposits. High‐angle faults interpreted in the seismic profile correspond to fault scarps on Quaternary alluvial fan surfaces. Interpretation of the reflection data suggests that the high‐angle faults vertically displace the LANF up to 80 m within the Wildrose graben. Similarly, the profile south of Ballarat reveals a low‐angle reflector, which appears both rotated and displaced up to 260 m by high‐angle faults. These results suggest that near the Panamint range front, the high‐angle faults are the dominant active structures. We conclude that at least at shallow (<1 km) depths, the LANF we imaged is not active today.

California↗

USGS2020

Seismic analysis of the 2020 Magna, Utah, earthquake sequence: Evidence for a listric Wasatch fault

The 18 March 2020 M w 5.7 Magna earthquake near Salt Lake City, Utah, offers a rare glimpse into the subsurface geometry of the Wasatch fault system—one of the world's longest active normal faults and a major source of seismic hazard in northern Utah. We analyze the Magna earthquake sequence and resolve oblique-normal slip on a shallow (30–35°) west-dipping fault at ~9- to 12-km depth. Combined with near-surface geological observations of steep dip (~70°), our results support a curved, or listric, fault shape. High-precision aftershock locations show the activation of multiple, low-angle (<30–35°) structures, indicating the existence of a complicated fault system. Our observations constrain the deep structure of the Wasatch fault system and suggest that ground shaking in the Salt Lake City region in future Wasatch fault earthquakes may be higher than previously estimated.

Utah↗

USGS2020

Documentation of Surface Fault Rupture and Ground‐Deformation Features Produced by the 4 and 5 July 2019 Mw 6.4 and Mw 7.1 Ridgecrest Earthquake Sequence

The M w "> M w Mw 6.4 and M w "> M w Mw 7.1 Ridgecrest earthquake sequence occurred on 4 and 5 July 2019 within the eastern California shear zone of southern California. Both events produced extensive surface faulting and ground deformation within Indian Wells Valley and Searles Valley. In the weeks following the earthquakes, more than six dozen scientists from government, academia, and the private sector carefully documented the surface faulting and ground‐deformation features. As of December 2019, we have compiled a total of more than 6000 ground observations; approximately 1500 of these simply note the presence or absence of fault rupture or ground failure, but the remainder include detailed descriptions and other documentation, including tens of thousands of photographs. More than 1100 of these observations also include quantitative field measurements of displacement sense and magnitude. These field observations were supplemented by mapping of fault rupture and ground‐deformation features directly in the field as well as by interpreting the location and extent of surface faulting and ground deformation from optical imagery and geodetic image products. We identified greater than 68 km of fault rupture produced by both earthquakes as well as numerous sites of ground deformation resulting from liquefaction or slope failure. These observations comprise a dataset that is fundamental to understanding the processes that controlled this earthquake sequence and for improving earthquake hazard estimates in the region. This article documents the types of data collected during postearthquake field investigations, the compilation effort, and the digital data products resulting from these efforts.

California↗

USGS2020

Evidence of previous faulting along the 2019 Ridgecrest, California earthquake ruptures

The July 2019 Ridgecrest earthquake sequence in southeastern California was characterized as surprising because only ~35% of the rupture occurred on previously mapped faults. Employing more detailed inspection of pre-event high-resolution topography and imagery in combination with field observations, we document evidence of active faulting in the landscape along the entire fault system. Scarps, deflected drainages, and lineaments and contrasts in topography, vegetation, and ground color demonstrate previous slip on a dense network of orthogonal faults, consistent with patterns of surface rupture observed in 2019. Not all of these newly mapped fault strands ruptured in 2019. Outcrop-scale field observations additionally reveal tufa lineaments and sheared Quaternary deposits. Neotectonic features are commonly short (<2 km), discontinuous, and display en echelon patterns along both the M 6.4 and M 7.1 ruptures. These features are generally more prominent and better preserved outside the late Pleistocene lake basins. Fault expression may also be related to deformation style: scarps and topographic lineaments are more prevalent in areas where substantial vertical motion occurred in 2019. Where strike-slip displacement dominated in 2019, the faults are mainly expressed by less prominent tonal and vegetation features. Both the NE- and NW-trending active fault systems are subparallel to regional bedrock fabrics that were established as early as ~150 Ma, and may be reactivating these older structures. Overall, we estimate that 50-70% (i.e., an additional 15-35%) of the 2019 surface ruptures could have been recognized as active faults with detailed inspection of pre-event data. Similar detailed mapping of potential neotectonic features could help improve seismic hazard analyses in other regions of eastern California and elsewhere that have distributed faulting or incompletely mapped faults. In areas where faults cannot be resolved as single thoroughgoing structures, a zone of potential faulting should be used as a hazard model input.

California↗

USGS2020

Surface displacement distributions for the July 2019 Ridgecrest, California earthquake ruptures

Surface rupture in the 2019 Ridgecrest, California, earthquake sequence occurred along two orthogonal cross faults and includes dominantly left‐lateral and northeast‐striking rupture in the M w "> M w 6.4 foreshock and dominantly right‐lateral and northwest‐striking rupture in the M w "> M w 7.1 mainshock. We present > 650 "> > 650 field‐based, surface‐displacement observations for these ruptures and synthesize our results into cumulative along‐strike displacement distributions. Using these data, we calculate displacement gradients and compare our results with historical strike‐slip ruptures in the eastern California shear zone. For the M w "> M w 6.4 rupture, we report 96 displacements measured along 18 km of northeast‐striking rupture. Cumulative displacement curves for the rupture yield a mean left‐lateral displacement of 0.3–0.5 m and maximum of 0.7–1.6 m. Net mean vertical displacement based on the difference of down‐to‐the‐west (DTW) and down‐to‐the‐east (DTE) displacement curves is close to zero (0.02 m DTW). The M w "> M w 6.4 displacement distribution shows that the majority of displacement occurred southwest of the intersection with the M w "> M w 7.1 rupture. The M w "> M w 7.1 rupture is northwest‐striking and 50 km long based on 576 field measurements. Displacement curves indicate a mean right‐lateral displacement of 1.2–1.7 m and a maximum of 4.3–7.0 m. Net vertical displacement in the rupture averages 0.3 m DTW. The M w "> M w 7.1 displacement distributions demonstrate that maximum displacement occurred along a 12‐km‐long portion of the fault near the M w "> M w 7.1 epicenter, releasing 66% of the geologically based seismic moment along 24% of the total rupture length. Using our displacement distributions, we calculate kilometer‐scale displacement gradients for the M w "> M w 7.1 rupture. The steepest gradients ( ⁠ ∼ 1 – 3    m / km "> ∼ 1 – 3 m / km ⁠ ) flank the 12‐km‐long region of maximum displacement. In contrast, gradients for the 1992 M w "> M w 7.3 Landers and 1999 M w "> M w 7.1 Hector Mine earthquakes are < 0.6    m / km "> < 0.6 m / km . Our displacement distributions are important for understanding the influence of cross‐fault rupture on M w "> M w 6.4 and 7.1 rupture length and displacement and will facilitate comparisons with distributions generated remotely and at broader scales.

California↗

USGS2019

Holocene earthquake history and slip rate of the southern Teton fault, Wyoming, USA

The 72-km-long Teton normal fault bounds the eastern base of the Teton Range in northwestern Wyoming, USA. Although geomorphic surfaces along the fault record latest Pleistocene to Holocene fault movement, the postglacial earthquake history of the fault has remained enigmatic. We excavated a paleoseismic trench at the Buffalo Bowl site along the southernmost part of the fault to determine its Holocene rupture history and slip rate. At the site, ∼6.3 m of displacement postdates an early Holocene (ca. 10.5 ka) alluvial-fan surface. We document evidence of three surface-faulting earthquakes based on packages of scarp-derived colluvium that postdate the alluvial-fan units. Bayesian modeling of radiocarbon and luminescence ages yields earthquake times of ca. 9.9 ka, ca. 7.1 ka, and ca. 4.6 ka, forming the longest, most complete paleoseismic record of the Teton fault. We integrate these data with a displaced deglacial surface 4 km NE at Granite Canyon to calculate a postglacial to mid-Holocene (14.4−4.6 ka) slip rate of ∼1.1 mm/yr. Our analysis also suggests that the postglacial to early Holocene (14.4−9.9 ka) slip rate exceeds the Holocene (9.9−4.6 ka) rate by a factor of ∼2 (maximum of 3); however, a uniform rate for the fault is possible considering the 95% slip-rate errors. The ∼5 k.y. elapsed time since the last rupture of the southernmost Teton fault implies a current slip deficit of ∼4−5 m, which is possibly explained by spatially/temporally incomplete paleoseismic data, irregular earthquake recurrence, and/or variable per-event displacement. Our study emphasizes the importance of minimizing slip-rate uncertainties by integrating paleoseismic and geomorphic data sets and capturing multiple earthquake cycles.

Wyoming↗

USGS2019

Relaxing segmentation on the Wasatch Fault Zone: Impact on seismic hazard

The multisegment Wasatch fault zone is a well-studied normal fault in the western United States that has paleoseismic evidence of recurrent Holocene surface-faulting earthquakes. Along the 270-km-long central part of the fault, four primary structural complexities provide possible along-strike limits to these ruptures and form the basis for models of fault segmentation. Here, we assess the impact that the Wasatch fault segmentation model has on seismic hazard by evaluating the time-independent long-term rate of ruptures on the fault that satisfy fault slip rates and paleoseismic event rates, adapting standard inverse theory used in the Uniform California Earthquake Rupture Forecast 3 (UCERF3), and implementing a segmentation constraint where ruptures across primary structural complexities are penalized. We define three models with varying degrees of rupture penalization: (1) segmented (ruptures confined to individual segments), (2) penalized (multi-segment ruptures allowed, but penalized), and (3) unsegmented (all ruptures allowed). Seismic-hazard results show that on average, hazard is highest for the segmented model, where seismic moment is accommodated by frequent moderate (moment magnitude, M w 6.2–6.8) earthquakes. The unsegmented model yields the lowest average seismic hazard because part of the seismic moment is accommodated by large (M w 6.9–7.9), but infrequent ruptures. We compare these results to model differences derived from other inputs such as slip rate and magnitude scaling relationships and conclude that segmentation exerts a primary control on seismic hazard. This study demonstrates the need for additional geologic constraints on rupture extent and methods by which these observations can be included in hazard-modeling efforts.

Utah↗

USGS2019

Holocene rupture history of the central Teton fault at Leigh Lake; Grand Teton National Park, Wyoming

Prominent scarps on Pinedale glacial surfaces along the eastern base of the Teton Range confirm latest Pleistocene to Holocene surface‐faulting earthquakes on the Teton fault, but the timing of these events is only broadly constrained by a single previous paleoseismic study. We excavated two trenches at the Leigh Lake site near the center of the Teton fault to address open questions about earthquake timing and rupture length. Structural and stratigraphic evidence indicates two surface‐faulting earthquakes at the site that postdate deglacial sediments dated by radiocarbon and optically stimulated luminescence to ∼10–11 ka⁠. Earthquake LL2 occurred at ∼10.0 ka (9.7–10.4 ka; 95% confidence range) and LL1 at ∼5.9 ka (4.8–7.1 ka; 95%). LL2 predates an earthquake at ∼8ka identified in the previous paleoseismic investigation at Granite Canyon. LL1 corresponds to the most recent Granite Canyon earthquake at ∼4.7–7.9 ka (95% confidence range). Our results are consistent with the previously documented long‐elapsed time since the most recent Teton fault rupture and expand the fault’s earthquake history into the early Holocene.

Wyoming↗

USGS2019

Variable normal-fault rupture behavior, northern Lost River fault zone, Idaho, USA

The 1983 Mw 6.9 Borah Peak earthquake generated ∼36 km of surface rupture along the Thousand Springs and Warm Springs sections of the Lost River fault zone (LRFZ, Idaho, USA). Although the rupture is a well-studied example of multisegment surface faulting, ambiguity remains regarding the degree to which a bedrock ridge and branch fault at the Willow Creek Hills influenced rupture progress. To explore the 1983 rupture in the context of the structural complexity, we reconstruct the spatial distribution of surface displacements for the northern 16 km of the 1983 rupture and prehistoric ruptures in the same reach of the LRFZ using 252 vertical-separation measurements made from high-resolution (5–10-cm-pixel) digital surface models. Our results suggest the 1983 Warm Springs rupture had an average vertical displacement of ∼0.3–0.4 m and released ∼6% of the seismic moment estimated for the Borah Peak earthquake and <12% of the moment accumulated on the Warm Springs section since its last prehistoric earthquake. The 1983 Warm Springs rupture is best described as the moderate-displacement continuation of primary rupture from the Thousand Springs section into and through a zone of structural complexity. Historical and prehistoric displacements show that the Willow Creek Hills have impeded some, but not all ruptures. We speculate that rupture termination or penetration is controlled by the history of LRFZ moment release, displacement, and rupture direction. Our results inform the interpretation of paleoseismic data from near zones of normal-fault structural complexity and demonstrate that these zones may modulate rather than impede rupture displacement.

Idaho↗

USGS2019

The effect of stress changes on time-dependent earthquake probabilities for the central Wasatch Fault Zone, Utah, USA

Static and quasi-static Coulomb stress changes produced by large earthquakes can modify the probability of occurrence of subsequent events on neighboring faults. This approach is based on physical (Coulomb stress changes) and statistical (probability calculations) models, which are influenced by the quality and quantity of data available in the study region. Here, we focus on the Wasatch Fault Zone (WFZ), a well-studied active normal fault system having abundant geologic and paleoseismological data. Paleoseismological trench investigations of the WFZ indicate that at least 24 large, surface-faulting earthquakes have ruptured the fault’s five central, 35–59-km long segments since ~7 ka. Our goal is to determine if the stress changes due to the youngest paleoevents have significantly modified the present-day probability of occurrence of large earthquakes on each of the segments. For each segment, we modeled the cumulative (coseismic + postseismic) Coulomb stress changes (∆CFScum) due to earthquakes younger than the most recent event on the segment in question and applied the resulting values to the time-dependent probability calculations. Results from the Coulomb stress modeling suggest that the Brigham City, Salt Lake City, and Provo segments have accumulated ∆CFScum larger than 10 bars, whereas the Weber segment has experienced a stress decrease of 5 bars, in the scenario of recent rupture of the Great Salt Lake fault to the west. Probability calculations predict high probability of occurrence for the Brigham City and Salt Lake City segments, due to their long elapsed times (>1-2 ka) when compared to the Weber, Provo, and Nephi segments (< 1 ka). The range of calculated coefficients of variation (CV) has a large influence on the final probabilities, mostly in the case of the Brigham City segment. Finally, when the Coulomb stress and the probability models are combined, our results indicate that the ∆CFScum resulting from earthquakes postdating the youngest events on each of the five segments significantly affects the probability calculations for three of the segments: Brigham City, Salt Lake City, and Provo. The probability of occurrence of a large earthquake in the next 50 years on these three segments may therefore be underestimated if a time-independent approach, or a time-dependent approach that does not consider ∆CFS, is adopted.

Utah↗