Geology topics

Christine Regalla

Publications and source records attributed to Christine Regalla.

7 recordsLinked to original sources

USGS2026

A deep dive into subduction zones and the Japan Trench

Deep beneath the ocean, giant slabs of rock slide beneath one another in areas called subduction zones. These powerful movements shape the planet by building mountains, creating fiery volcanoes, and even causing huge earthquakes. Scientists study subduction zones to understand why these natural events happen and where and how they might occur so we can be better prepared. One important subduction zone is the Japan Trench, where a big earthquake happened in 2011. To learn more about subduction zones, scientists go on ocean drilling expeditions. They sail on research ships, drill into the seafloor, and collect rock samples. These samples help scientists understand what happened in the past and how subduction zones work. In turn, this information helps communities better understand and prepare for future earthquakes.

Frontiers for Young Minds↗

USGS2025

Spatiotemporal variations in strain release and seismic rupture in multifault systems: An example from Panamint Valley, southeastern California

Geometrically complex, multifault ruptures have been observed in recent, damaging earthquakes in southeastern California, sparking renewed efforts to identify physical conditions that promote or inhibit fault discontinuity-spanning coseismic ruptures. The likelihood of ruptures propagating across fault discontinuities is thought to be partly controlled by fault geometries, rupture direction, and the history of strain release. However, these parameters vary in space and time over multiple earthquake cycles, making it difficult to forecast the likelihood that an earthquake on one fault will trigger rupture on a nearby fault. Here we use tectono-geomorphic mapping of a geometrically complex fault zone in Panamint Valley, southeastern California, to assess spatiotemporal variations of paleo-rupture patterns and geometries of fault discontinuities over multiple earthquake cycles. First, we identify ten generations of late Pleistocene to Holocene alluvium using geomorphic parameters and luminescence dating to constrain ages of alluvium and bracket late Holocene earthquake timing. Then, we quantify slip kinematics using high-resolution structure from motion digital surface models. We find the Panamint Valley transtensional relay (PVTR) hosted four late Holocene earthquakes, bracketed to ~5.8–3.4 ka, ~3.8–2.2 ka, ~2.4–0.6 ka, and ~0.64–0.16 ka, with ~0.6–1.1 m of slip per event, correlative to Mw ≈ 6.7–6.9 earthquakes. Additionally, we find similarities in earthquake timing on the Ash Hill, PVTR, and Panamint Valley faults and similarities in the slip magnitude and slip kinematics between the Ash Hill and PVTR faults, implying that the PVTR may co-rupture with nearby faults. Paleo-rupture patterns indicate that seismogenic strain transfer may occur through the PVTR, along different combinations of fault segments and jump distances, over multiple earthquake cycles. These data highlight the utility of tectono-geomorphic mapping in evaluating paleo-rupture patterns and suggest that the PVTR may act to propagate and/or arrest rupture between the Ash Hill and Panamint Valley faults.

California↗

USGS2025

Oligocene–Miocene development and evolution of the south Dome Rock Mountains basin, lower Colorado River corridor, Arizona, USA

Sedimentary basins in the Colorado River extensional corridor record large-magnitude Basin and Range extension and younger dextral shear deformation in the evolving Pacific−North America plate boundary. The south Dome Rock Mountains basin is located in west-central Arizona (USA), where the history of basin evolution, style of deformation, and timing of the transition between extension and dextral shear are not well constrained. We integrate new geologic mapping of the south Dome Rock Mountains basin with zircon U-Pb geochronology of six marker beds to characterize the timing of basin evolution and the slip history of the south Dome Rock Mountains normal fault. Structural analysis defines structures consistent with regional extension and younger dextral shear deformation. We use sedimentological and petrological analysis to interpret the depositional environments of three basin sequences. A lower basin sequence consists of fluvial strata deposited in an internally drained intermontane basin from ca. 35 Ma to 24.4 Ma. A sequence of volcanic rocks was emplaced in the basin between 24.4 Ma and 23.3 Ma, before the onset of local extensional faulting. An upper basin sequence of coarse conglomerate and sedimentary breccia was deposited on the hanging wall of a half graben structure after 23.3 Ma and through ca. 12.8 Ma, synchronous with 3−7 km of dip slip on the west-dipping, listric south Dome Rock Mountains fault. The basin was subsequently deformed by dextral shear after 12.8 Ma and before 4.8 Ma. These results document how distributed deformation related to the evolving Pacific−North America plate boundary occurred >100 km from the primary plate boundary.

Arizona, California↗

USGS2025

Extreme plate boundary localization promotes shallow earthquake slip at the Japan Trench

The 2011 Mw9.1 Tohoku-oki earthquake is exceptional among great earthquakes for having peak slip of ~50-70 m on the shallowest portion of the plate boundary megathrust. International Ocean Discovery Program Expedition 405 drilled multiple holes through the megathrust in the large slip region and at a Pacific Plate input site. The megathrust preferentially develops at the top or base of the pelagic clay in the input section where pronounced contrasts in physical properties are present. This results in a narrow, weak fault located at a major mechanical contact between frontal prism mud and subducted clay. Localization imposed by the input section enhances the tendency for shallow seismic slip, showing the Japan Trench may be more susceptible to ruptures with large shallow slip than margins without weak clays.

Japan Trench↗

USGS2023

Discovery of an active forearc fault in an urban region: Holocene rupture on the XEOLXELEK-Elk Lake fault, Victoria, British Columbia, Canada

Subduction forearcs are subject to seismic hazard from upper plate faults that are often invisible to instrumental monitoring networks. Identifying active faults in forearcs therefore requires integration of geomorphic, geologic, and paleoseismic data. We demonstrate the utility of a combined approach in a densely populated region of Vancouver Island, Canada, by combining remote sensing, historical imagery, field investigations, and shallow geophysical surveys to identify a previously unrecognized active fault, the XEOLXELEK-Elk Lake fault, in the northern Cascadia forearc, ∼10 km north of the city of Victoria. Lidar-derived digital terrain models and historical air photos show a ∼2.5-m-high scarp along the surface of a Quaternary drumlinoid ridge. Paleoseismic trenching and electrical resistivity tomography surveys across the scarp reveal a single reverse-slip earthquake produced a fault-propagation fold above a blind southwest-dipping fault. Five geologically plausible chronological models of radiocarbon dated charcoal constrain the likely earthquake age to between 4.7 and 2.3 ka. Fault-propagation fold modeling indicates ∼3.2 m of reverse slip on a blind, 50° southwest-dipping fault can reproduce the observed deformation. Fault scaling relations suggest a M 6.1–7.6 earthquake with a 13 to 73-km-long surface rupture and 2.3–3.2 m of dip slip may be responsible for the deformation observed in the paleoseismic trench. An earthquake near this magnitude in Greater Victoria could result in major damage, and our results highlight the importance of augmenting instrumental monitoring networks with remote sensing and field studies to identify and characterize active faults in similarily challenging environments.

Victoria↗

USGS2022

Paleoseismic study of the XEOLXELEK–Elk Lake fault: A newly identified Holocene fault in thenorthern Cascadia forearc near Victoria, British Columbia, Canada

High-resolution topographic data show a tectonic scarp formed in Quaternary sediments near the city of Victoria in the northern Cascadia forearc on Vancouver Island, British Columbia, Canada. A paleoseismic trench excavation across the structure, the XEOLXELEK–Elk Lake fault, shows evidence for a Holocene (after 12.2 cal ka BP) surface-rupturing reverse-slip earthquake that produced a fault-propagation fold and resulted in the formation of a ∼1.4 to 3.5 m-high scarp. Fault-propagation fold modelling indicates ∼3.2 m of reverse slip on a 50°-dipping fault plane reproduces the observed deformation, and fault-scaling relations suggest a single earthquake rupture with this surface displacement could occur during a ∼Mw 6.1– 7.6 earthquake. Given the fault’s location within the metropolitan area of Victoria, an earthquake near this magnitude would result in significant damage to local infrastructure and this fault is worth considering in future seismic hazard assessments.

Conference Paper↗

USGS2021

Paleoseismic trenching reveals late quaternary kinematics of the Leech River Fault: Implications for forearc strain accumulation in Northern Cascadia

New paleoseismic trenching indicates late Quaternary oblique right‐lateral slip on the Leech River fault, southern Vancouver Island, Canada, and constrains permanent forearc deformation in northern Cascadia. A south‐to‐north reduction in northward Global Navigation Satellite System velocities and seismicity across the Olympic Mountains, Strait of Juan de Fuca (JDF), and the southern Strait of Georgia, has been used as evidence for permanent north–south crustal shortening via thrust faulting between a northward migrating southern forearc and rigid northern backstop in southwestern Canada. However, previous paleoseismic studies indicating late Quaternary oblique right‐lateral slip on west‐northwest‐striking forearc faults north of the Olympic Mountains and in the southern Strait of Georgia are more consistent with forearc deformation models that invoke oroclinal bending and(or) westward extrusion of the Olympic Mountains. To help evaluate strain further north across the Strait of JDF, we present the results from two new paleoseismic trenches excavated across the Leech River fault. In the easternmost Good Hope trench, we document a vertical fault zone and a broad anticline deforming glacial till. Comparison of till clast orientations in faulted and undeformed glacial till shows evidence for postdeposition faulted till clast rotation, indicating strike‐slip shear. The orientation of opening mode fissuring during surface rupture is consistent with right‐lateral slip and the published regional S H max "> S H max SHmax directions. Vertical separation and the formation of scarp‐derived colluvium along one fault also indicate a dip‐slip component. Radiocarbon charcoal dating within offset glacial till and scarp‐derived colluvium suggest a single surface rupturing earthquake at 9.4 ± 3.4    ka "> 9.4 ± 3.4 ka 9.4±3.4 ka ⁠ . The oblique right‐lateral slip sense inferred in the Good Hope trench is consistent with slip kinematics observed on other regional west‐northwest‐striking faults and indicates that these structures do not accommodate significant north–south shortening via thrust faulting.

Washington↗