Geology topics

Castle E. Parker

Publications and source records attributed to Castle E. Parker.

7 recordsLinked to original sources

USGS2015

Sea-floor morphology and sedimentary environments in western Block Island Sound, offshore of Fishers Island, New York

Multibeam-bathymetric and sidescan-sonar data, collected by the National Oceanic and Atmospheric Administration in a 114-square-kilometer area of Block Island Sound, southeast of Fishers Island, New York, are combined with sediment samples and bottom photography collected by the U.S. Geological Survey from 36 stations in this area in order to interpret sea-floor features and sedimentary environments. These interpretations and datasets provide base maps for studies on benthic ecology and resource management. The geologic features and sedimentary environments on the sea floor are products of the area’s glacial history and modern processes. These features include bedrock, drumlins, boulders, cobbles, large current-scoured bathymetric depressions, obstacle marks, and glaciolacustrine sediments found in high-energy sedimentary environments of erosion or nondeposition; and sand waves and megaripples in sedimentary environments characterized by coarse-grained bedload transport. Trawl marks are preserved in lower energy environments of sorting and reworking. This report releases the multibeam-bathymetric, sidescan-sonar, sediment, and photographic data and interpretations of the features and sedimentary environments in Block Island Sound, offshore Fishers Island.

New York↗

USGS2014

Character, distribution, and ecological significance of storm wave-induced scour in Rhode Island Sound, USA

Multibeam bathymetry, collected during NOAA hydrographic surveys in 2008 and 2009, is coupled with USGS data from sampling and photographic stations to map the seabed morphology and composition of Rhode Island Sound along the US Atlantic coast, and to provide information on sediment transport and benthic habitats. Patchworks of scour depressions cover large areas on seaward-facing slopes and bathymetric highs in the sound. These depressions average 0.5-0.8 m deep and occur in water depths reaching as much as 42 m. They have relatively steep well-defined sides and coarser-grained floors, and vary strongly in shape, size, and configuration. Some individual scour depressions have apparently expanded to combine with adjacent depressions, forming larger eroded areas that commonly contain outliers of the original seafloor sediments. Where cobbles and scattered boulders are present on the depression floors, the muddy Holocene sands have been completely removed and the winnowed relict Pleistocene deposits exposed. Low tidal-current velocities and the lack of obstacle marks suggest that bidirectional tidal currents alone are not capable of forming these features. These depressions are formed and maintained under high-energy shelf conditions owing to repetitive cyclic loading imposed by high-amplitude, long-period, storm-driven waves that reduce the effective shear strength of the sediment, cause resuspension, and expose the suspended sediments to erosion by wind-driven and tidal currents. Because epifauna dominate on gravel floors of the depressions and infauna are prevalent in the finer-grained Holocene deposits, it is concluded that the resultant close juxtaposition of silty sand-, sand-, and gravel-dependent communities promotes regional faunal complexity. These findings expand on earlier interpretations, documenting how storm wave-induced scour produces sorted bedforms that control much of the benthic geologic and biologic diversity in Rhode Island Sound.

Rhode Island↗

USGS2014

Sea-floor morphology and sedimentary environments of western Block Island Sound, northeast of Gardiners Island, New York

Multibeam-echosounder data, collected during survey H12299 by the National Oceanic and Atmospheric Administration in a 162-square-kilometer area of Block Island Sound, northeast of Gardiners Island, New York, are used along with sediment samples and bottom photography, collected at 37 stations in this area by the U.S. Geological Survey during cruise 2013-005-FA, to interpret sea-floor features and sedimentary environments. These data and interpretations provide important base maps for future studies of the sea floor, focused, for example, on benthic ecology and resource management. The features and sedimentary environments on the sea floor are products of the glacial history and modern tidal regime. Features include bedforms such as sand waves and megaripples, boulders, a large current-scoured depression, exposed glaciolacustrine sediments, and areas of modern marine sediment. Sand covers much of the study area and is often in the form of sand waves and megaripples, which indicate environments characterized by coarse-grained bedload transport. Boulders and gravelly lag deposits, which indicate environments of erosion or nondeposition, are found off the coast of Gardiners Island and on bathymetric highs, probably marking areas where deposits associated with recessional ice-front positions, the northern flank of the terminal moraine, or coastal-plain sediments covered with basal till are exposed. Bottom photographs and video of boulders show that they are commonly covered with sessile fauna. Strong tidal currents have produced the deep scour depression along the northwestern edge of the study area. The eastern side of this depression is armored with a gravel lag. Sea-floor areas characterized by modern marine sediments appear featureless at the 2-meter resolution of the bathymetry and flat to current rippled in the photography. These modern environments are indicative of sediment sorting and reworking.

New York↗

USGS2014

National Oceanic and Atmospheric Administration hydrographic survey data used in a U.S. Geological Survey regional geologic framework study along the Delmarva Peninsula

The U.S. Geological Survey initiated a research effort in 2014 to define the geologic framework of the Delmarva Peninsula inner continental shelf, which included new data collection and assembly of relevant extant datasets. Between 2006 and 2011, Science Applications International Corporation, under contract to the National Oceanic and Atmospheric Administration National Ocean Service, carried out 23 hydrographic surveys covering more than 4,100 square kilometers of the continental shelf using Reson multibeam echosounders and Klein towed sidescan sonars to update nautical charts along the Delmarva Peninsula. Acoustic backscatter data from these instruments are valuable for characterizing aspects of shallow geologic framework, including seafloor geology, sediment transport pathways, and marine resources. The data cover an area that extends from the entrance of Delaware Bay, Delaware, south to Parramore Island, Virginia, in water depths of about 3 to 35 meters below mean lower low water. Data were collected along lines spaced 40 meters apart, resulting in 40 to 100 percent seafloor coverage for multibeam bathymetry. Processed bathymetric data within the Delmarva Peninsula study area are available through a National Ocean Service interactive map interface, but towed sidescan data products are limited, and multibeam backscatter data products have not been available in the past. The U.S. Geological Survey obtained raw Reson multibeam data files from Science Applications International Corporation and the National Oceanic and Atmospheric Administration for 20 hydrographic surveys and extracted backscatter data using the Fledermaus Geocoder Toolbox from Quality Positioning Service. The backscatter mosaics produced by the U.S. Geological Survey for the inner continental shelf of the Delmarva Peninsula using National Oceanic and Atmospheric Administration data increased regional geophysical surveying efficiency, collaboration among government agencies, and the area over which geologic data can be interpreted by the U.S. Geological Survey. This report describes the methods by which the backscatter data were extracted and processed and includes backscatter mosaics and interpolated bathymetric surfaces.

Delaware, Maryland, Virginia↗

USGS2013

Sea-floor geology in northeastern Block Island Sound, Rhode Island

Multibeam-echosounder and sidescan-sonar data collected by the National Oceanic and Atmospheric Administration in northeastern Block Island Sound, combined with sediment samples and bottom photography collected by the U.S. Geological Survey, are used to interpret sea-floor features and sedimentary environments in this 52-square-kilometer-area offshore Rhode Island. Boulders, which are often overgrown with sessile fauna and flora, are mostly in water depths shallower than 20 meters. They are probably part of the southern flank of the Harbor Hill-Roanoke Point-Charlestown-Buzzards Bay moraine, deposited about 18,000 years ago. Scour depressions, areas of the sea floor with a coarser grained, rippled surface lying about 0.5 meter below the finer grained, surrounding sea floor, along with erosional outliers within the depressions are in a band near shore and also offshore in deep parts of the study area. Textural and bathymetric differences between areas of scour depressions and the surrounding sea floor or erosional outliers stand out in the sidescan-sonar imagery with sharp tonal contrasts. Also visible in the sidescan-sonar imagery are broad, low-profile bedforms with coarser grained troughs and finer grained crests.

Rhode Island↗

USGS2011

Combined multibeam and LIDAR bathymetry data from eastern Long Island Sound and westernmost Block Island Sound-A regional perspective

Detailed bathymetric maps of the sea floor in Long Island Sound are of great interest to the Connecticut and New York research and management communities because of this estuary's ecological, recreational, and commercial importance. The completed, geologically interpreted digital terrain models (DTMs), ranging in area from 12 to 293 square kilometers, provide important benthic environmental information, yet many applications require a geographically broader perspective. For example, individual surveys are of limited use for the planning and construction of cross-sound infrastructure, such as cables and pipelines, or for the testing of regional circulation models. To address this need, we integrated 12 multibeam and 2 LIDAR (Light Detection and Ranging) contiguous bathymetric DTMs, produced by the National Oceanic and Atmospheric Administration during charting operations, into one dataset that covers much of eastern Long Island Sound and extends into westernmost Block Island Sound. The new dataset is adjusted to mean lower low water, is gridded to 4-meter resolution, and is provided in UTM Zone 18 NAD83 and geographic WGS84 projections. This resolution is adequate for sea floor-feature and process interpretation but is small enough to be queried and manipulated with standard Geographic Information System programs and to allow for future growth. Natural features visible in the grid include exposed bedrock outcrops, boulder lag deposits of submerged moraines, sand-wave fields, and scour depressions that reflect the strength of the oscillating and asymmetric tidal currents. Bedform asymmetry allows interpretations of net sediment transport. Anthropogenic artifacts visible in the bathymetric data include a dredged channel, shipwrecks, dredge spoils, mooring anchors, prop-scour depressions, buried cables, and bridge footings. Together the merged data reveal a larger, more continuous perspective of bathymetric topography than previously available, providing a fundamental framework for research and resource management activities in this major east-coast estuary.

Open-File Report↗

USGS2010

Integrated Multibeam and LIDAR Bathymetry Data Offshore of New London and Niantic, Connecticut

Nearshore areas within Long Island Sound are of great interest to the Connecticut and New York research and resource management communities because of their ecological, recreational, and commercial importance. Although advances in multibeam echosounder technology permit the construction of high-resolution representations of sea-floor topography in deeper waters, limitations inherent in collecting fixed-angle multibeam data make using this technology in shallower waters (less than 10 meters deep) difficult and expensive. These limitations have often resulted in data gaps between areas for which multibeam bathymetric datasets are available and the adjacent shoreline. To address this problem, the geospatial data sets released in this report seamlessly integrate complete-coverage multibeam bathymetric data acquired off New London and Niantic Bay, Connecticut, with hydrographic Light Detection and Ranging (LIDAR) data acquired along the nearshore. The result is a more continuous sea floor representation and a much smaller gap between the digital bathymetric data and the shoreline than previously available. These data sets are provided online and on CD-ROM in Environmental Systems Research Institute (ESRI) raster-grid and GeoTIFF formats in order to facilitate access, compatibility, and utility.

Open-File Report↗