Geology ReportsSearch

Geology topics

Cameron Rombach

Publications and source records attributed to Cameron Rombach.

3 recordsLinked to original sources

Paleozoic sedimentary rocks in the Red Dog Zn-Pb-Ag district and vicinity, western Brooks Range, Alaska: provenance, deposition, and metallogenic significance

Geochemical analyses of Paleozoic sedimentary rocks in the western Brooks Range reveal a complex evolutionary history for strata surrounding the large Zn-Pb-Ag deposits of the Red Dog district. Data for major elements, trace elements, and rare earth elements (REE) were obtained on 220 samples of unaltered and unmineralized siliciclastic rocks from the Upper Devonian-Lower Mississippian Endicott Group (Hunt Fork Shale, Noatak Sandstone, Kanayut Conglomerate, Kayak Shale), the overlying Carboniferous Lisburne Group (Kuna Formation, unnamed drowned shelf facies), and the Pennsylvanian-Permian Siksikpuk Formation. Major base metal sulfide deposits of the region are present only in the Kuna Formation, which in the Red Dog district comprises siliceous black shale and black chert, minor limestone (calcareous radiolarite), and sparse lithic turbidite and bedded siliceous rock. Gray and rare black shales of the Kayak Shale and common black shales of the Kuna Formation are anomalously low in iron (avg Fe/Ti = 6.25 and 6.34, respectively) relative to other Paleozoic shales in the region (9.58-10.6) and to average shales worldwide (10.1-10.5). In contrast, the bedded siliceous rocks contain appreciable hematite (avg Fe/Ti = 35.0) and high U/Ti and REE/Ti ratios that are interpreted to reflect low amounts of detrital material and a major Fe-rich eolian component. Geochemical data (e.g., MnO <0.01 wt %; avg Cr = 317 ppm), sizes of framboidal pyrite grains, and limited bioturbation suggest anoxic and denitrifying depositional conditions for most black shales of the Kuna Formation; low Mo/Ti ratios argue against euxinic (sulfate-reducing) conditions. Organic-rich black shales of the Kuna Formation with up to 8.4 wt percent C organic and gray to black shales of the Kayak Shale with up to 4.1 wt percent C organic typically have only sparse pyrite (<1 wt % S) and very low iron-limited S/C ratios (mostly <0.2). Immobile element plots (e.g., Th-Zr/10-Sc) suggest that source terranes for all of the formations were dominated by one or more felsic-rich continental arcs; a small proportion of recycled sediments is present locally. A minor mafic igneous component also occurs in several shales of the Kuna and Siksikpuk Formations. High average values for the chemical index of alteration [Al 2 O 3 /(Al 2 O 3 + CaO + Na 2 O + K 2 O)] &infin; 100 for shales of the Endicott Group (76.4-81.5) imply moderate to intense chemical weathering in source areas of these sediments. A lower average for black shales of the Kuna Formation (73.7) does not require such weathering. Textural and geochemical data record the effects of diagenetic and/or hydrothermal fluid flow in some of the Paleozoic rocks. Mobility of P, F, U, and light REE is documented in black shales of the Kuna Formation by phosphate replacements of carbonate clasts and of matrix material surrounding the clasts. A relatively low average Ce/Ce* value of 0.73 for P-poor black shales of the Kuna Formation ( < 0.05 wt % P 2 O 5 ) and a similar Ce/Ce* value of 0.78 for a siderite concretion in Kayak Shale suggest that these diagenetic fluids were oxidizing. Many shales of the Kuna Formation have high (K 2 O &infin; 100)/(K 2 O + Al 2 O 3 ) ratios of 21.0 to 23.0, which contrast with low ratios of generally <18.0 for shales of the underlying Endicott Group. The high ratios in shales of the Kuna Formation reflect preferential reaction of smectite to illite during the Jurassic-Cretaceous Brookian orogeny, owing to high silica activities in pore fluids that were generated by the dissolution of abundant biogenic silica. The distribution and composition of Paleozoic strata in the western Brooks Range may have played a fundamental role in Zn-Pb mineralization of the Red Dog district. In our model, deposition and early lithification of biogenic chert and bedded siliceous rocks in the upper part of the Kuna Formation served as a regional hydrologic seal, acting as a cap rock to heat and hydrothermal fluids during Late Mississippian base-metal mineralization. Equally important was the iron-poor composition of black shales of the Kuna Formation (i.e., low Fe/Ti ratios), which limited synsedimentary pyrite formation in precursor sediments, resulting in significant H 2 S production in pore waters through the interaction of aqueous sulfate with abundant organic matter. This H 2 S may have been critical to the subsurface deposition of the huge quantities of Zn and Pb in the district. On the basis of this model, we propose that low Fe/Ti and S/C ratios in black shale sequences are potential basin-scale exploration guides for giant sediment-hosted, stratiform Zn-Pb-Ag deposits.

Alaska

Nature of hydrothermal fluids at the shale-hosted Red Dog Zn-Pb-Ag deposits, Brooks Range, Alaska

The Red Dog Zn-Pb-Ag district in the western Brooks Range, northern Alaska, contains numerous shale-hosted Zn-Pb sulfide and barite deposits in organic-rich siliceous mudstone and shale, chert, and carbonate rocks of the Carboniferous Kuna Formation. The giant Red Dog shale-hosted deposits consist of a cluster of four orebodies (Main, Qanaiyaq, Aqqaluk, and Paalaaq) that lie within distinct thrust panels that offset a single ore deposit during the Mesozoic Brookian orogeny. These Zn-Pb-Ag-barite orebodies contain one of the world's largest reserves and resources of zinc. Fluid inclusions in samples of vein sphalerite, which accounts for about 20 percent of the ore in the Main deposit, and quartz that composes the bulk of the extensive silicification in the ore deposit, were studied by microthermometry, Raman spectrometry, and ion chromatography. The study of fluid inclusions in the vein sphalerite was limited by the intense postore deformation of the ore deposits. However, four primary aqueous fluid inclusion assemblages in vein sphalerite yield temperatures of homogenization of 115&deg; to 120&deg;C, 123&deg; to 127&deg;C, 110&deg; to 120&deg;C and 175&deg; to 180&deg;C. More abundant final-melting temperatures indicate that the fluid inclusions in sphalerite have salinities of about 14 to 19 wt percent NaCl equiv. The fluid inclusion electrolyte data show that the ore fluid responsible for the vein sphalerite derived its salinity from the evaporation of seawater. Considering the salinity of the fluid inclusions together with the electrolyte data, it is possible that the evaporative brine was initially about 30 wt percent saline fluid and that it mixed with a more dilute fluid somewhere along its flow path. The temperature, salinity, and electrolyte composition of vein sphalerite in the Red Dog deposits are remarkably similar to those characteristics in sphalerite veins near the Century zinc deposit, Australia. Together, these data compose the majority of information on the temperature and composition of sphalerite in deposits of this type. On the basis of data describing fluid inclusions in sphalerite and the geologic setting of the ore deposits, a "reflux brine" model is suggested for the Red Dog deposits. In this model, brines were produced in evaporative environments in supratidal carbonate facies of the Lisburne Group less than 100 km from the Red Dog deposits. These reflux brines may have infiltrated the underlying rocks of Endicott Group or fractured metasedimentary basement rocks. In the absence of a local heat source at the Red Dog deposits, the temperature of the ore fluids (~100&deg; to <200&deg;C) requires that the fluids circulated at depths between ~ 2.4 and 7.4 km. In the Red Dog area, the metalliferous fluids ascended into the organic-rich rocks of the Kuna Formation, probably along zones of active extensional faults or breaches in the shale aquitards overlying the aquifers in the Endicott Group. Fluid inclusions were also studied in the abundant quartz that constitutes the majority of the silica rock in the ore deposits. This postore quartz extensively replaced barite and was traditionally thought to be part of the main ore event. Primary fluid inclusion assemblages contain two-phase aqueous inclusions, single-phase inclusions of dense methane, or both. Primary assemblages that contain single-phase, dense-methane inclusions together with two-phase aqueous inclusions yield consistent homogenization temperatures that provide unequivocal evidence for the coeval trapping of immiscible gas and aqueous fluids. The densities of the methane inclusions, together with the temperature of homogenization of coexisting aqueous fluid inclusions, show that these fluid inclusions were trapped between pressures of 800 and 3,400 bars and temperatures between 187&deg; and 214&deg;C. The pressures obtained provide unequivocal evidence that the quartz formed after ore deposition in the Carboniferous because such high fluid pressures could only have been produced from thrust loading during the Mesozoic Brookian orogeny. The observed large variation in pressure is best explained by transient fluid pressures from hydrostatic to lithostatic conditions during thrust loading. The 3,400 bars pressure corresponds with about 12 km of lithostatic burial, whereas the lower pressures (800 bars) correspond with about 8 km of hydrostatic pressure. Because of their low salinity (0-5 wt % NaCl equiv) the electrolyte compositions of the quartz fluid inclusions do not constrain their origin.

Alaska