Geology topics

C. Wang

Publications and source records attributed to C. Wang.

5 recordsLinked to original sources

USGS2026

Large streamflow differences between forested and urbanized watersheds in the energy-limited eastern United States: The role of evapotranspiration and impervious surfaces

Urban forests and other green infrastructures have been viewed as part of the “Nature-based Solutions” (NbS) to mitigate emerging urban environmental change. This study focuses on the role of evapotranspiration (ET) in regulating water balances of small watersheds in the eastern United States. We compared streamflow and ET patterns at daily, monthly and annual scales and linked these hydrological variables to the physical properties of 11 paired watersheds dominated by forests (FW) or urban (UW) land covers. The annual precipitation ranged from 1028 mm to 1683 mm and potential ET (PET) from 815 mm to 1450 mm. The mean annual flow/precipitation (Q/P) ratios were 0.26 ± 0.13 and 0.41 ± 0.1 for FW and UW, respectively. Overall, UW had lower annual ET (772 mm in UW vs. 947 mm in FW), but higher mean annual and (∼58% higher), monthly water yield (17%–186% higher), and peakflow rates (up to 100 times higher) than FW. The streamflow differences between FW and UW were most pronounced during the growing season and early winter (June-November). The mean Q/P ratios for 30 large hurricane events (2016–2021) were 0.12 ± 0.11 and 0.38 ± 0.23 for FW and UW, respectively. The flow rates in the dormant season (around December-May) in UW were similar or lower than FW. We developed conceptual models to explain the seasonal and storm event streamflow differences using background climate (PET), ET, and land surface characteristics. Urban NbS designs should factor in strategies that maximize ET while minimizing impervious surfaces enhancing watershed “sponge” and “pump” functions.

eastern United States↗

USGS2016

Diagnostic and model dependent uncertainty of simulated Tibetan permafrost area

We perform a land-surface model intercomparison to investigate how the simulation of permafrost area on the Tibetan Plateau (TP) varies among six modern stand-alone land-surface models (CLM4.5, CoLM, ISBA, JULES, LPJ-GUESS, UVic). We also examine the variability in simulated permafrost area and distribution introduced by five different methods of diagnosing permafrost (from modeled monthly ground temperature, mean annual ground and air temperatures, air and surface frost indexes). There is good agreement (99 to 135  ×  10 4 km 2 ) between the two diagnostic methods based on air temperature which are also consistent with the observation-based estimate of actual permafrost area (101  × 10 4 km 2 ). However the uncertainty (1 to 128  ×  10 4 km 2 ) using the three methods that require simulation of ground temperature is much greater. Moreover simulated permafrost distribution on the TP is generally only fair to poor for these three methods (diagnosis of permafrost from monthly, and mean annual ground temperature, and surface frost index), while permafrost distribution using air-temperature-based methods is generally good. Model evaluation at field sites highlights specific problems in process simulations likely related to soil texture specification, vegetation types and snow cover. Models are particularly poor at simulating permafrost distribution using the definition that soil temperature remains at or below 0 °C for 24 consecutive months, which requires reliable simulation of both mean annual ground temperatures and seasonal cycle, and hence is relatively demanding. Although models can produce better permafrost maps using mean annual ground temperature and surface frost index, analysis of simulated soil temperature profiles reveals substantial biases. The current generation of land-surface models need to reduce biases in simulated soil temperature profiles before reliable contemporary permafrost maps and predictions of changes in future permafrost distribution can be made for the Tibetan Plateau.

Tibeta Plateau↗

USGS2011

Quantifying the hydrological responses to climate change in an intact forested small watershed in southern China

Responses of hydrological processes to climate change are key components in the Intergovernmental Panel for Climate Change (IPCC) assessment. Understanding these responses is critical for developing appropriate mitigation and adaptation strategies for sustainable water resources management and protection of public safety. However, these responses are not well understood and little long-term evidence exists. Herein, we show how climate change, specifically increased air temperature and storm intensity, can affect soil moisture dynamics and hydrological variables based on both long-term observation and model simulations using the Soil and Water Assessment Tool (SWAT) in an intact forested watershed (the Dinghushan Biosphere Reserve) in Southern China. Our results show that, although total annual precipitation changed little from 1950 to 2009, soil moisture decreased significantly. A significant decline was also found in the monthly 7-day low flow from 2000 to 2009. However, the maximum daily streamflow in the wet season and unconfined groundwater tables have significantly increased during the same 10-year period. The significant decreasing trends on soil moisture and low flow variables suggest that the study watershed is moving towards drought-like condition. Our analysis indicates that the intensification of rainfall storms and the increasing number of annual no-rain days were responsible for the increasing chance of both droughts and floods. We conclude that climate change has indeed induced more extreme hydrological events (e.g. droughts and floods) in this watershed and perhaps other areas of Southern China. This study also demonstrated usefulness of our research methodology and its possible applications on quantifying the impacts of climate change on hydrology in any other watersheds where long-term data are available and human disturbance is negligible.

Guangdong Province↗

USGS2009

Crustal structure across the Three Gorges area of the Yangtze platform, central China, from seismic refraction/wide-angle reflection data

We present active-source seismic data recorded along a 300 km-long profile across the Three Gorges area of the western Yangtze platform, central China. From west to east, the profile crosses the Zigui basin, Huangling dome and Jianghan basin. The derived crustal P -wave velocity structure changes significantly across the Tongchenghe fault that lies at the transition from the Huangling dome to the Jianghan basin. West of the Tongchenghe fault, beneath the Zigui basin and the Huangling dome, we observe a ~ 42 km thick crust of relatively low average velocity (6.3–6.4 km/s). In contrast, east of the Tongchenghe fault, beneath the Jianghan basin, the crust is only 30 km thick and has a high average velocity (6.6–6.7 km/s). A west–east variation in crustal composition along the Tongchenghe fault is also inferred. West of the fault, P -wave velocities suggest a felsic composition with an intermediate layer at the base of the crust, whilst, east of the fault, felsic, intermediate, and mafic crustal layers are apparent. Our results suggest that the crust beneath the Jianghan basin has been thinned by rifting, accompanied by intrusion of the lower crust by mafic dikes and sills. The west-to-east division of the crust in the Three Gorges area coincides with first-order geophysical contrasts in gravity, topography, crustal and lithospheric thickness.

Tectonophysics↗

USGS2002

Study on 3-D velocity structure of crust and upper mantle in Sichuan-yunnan region, China

Based on the first arrival P and S data of 4 625 regional earthquakes recorded at 174 stations dispersed in the Yunnan and Sichuan Provinces, the 3-D velocity structure of crust and upper mantle in the region is determined, incorporating with previous deep geophysical data. In the upper crust, a positive anomaly velocity zone exists in the Sichuan basin, whereas a negative anomaly velocity zone exists in the western Sichuan plateau. The boundary between the positive and negative anomaly zones is the Longmenshan fault zone. The images of lower crust and upper mantle in the Longmenshan fault, Xianshuihe fault, Honghe fault and others appear the characteristic of tectonic boundary, indicating that the faults litely penetrate the Moho discontinuity. The negative velocity anomalies at the depth of 50 km in the Tengchong volcanic area and the Panxi tectonic zone appear to be associated with the temperature and composition variations in the upper mantle. The overall features of the crustal and the upper mantle structures in the Sichuan-Yunnan region are the lower average velocity in both crust and uppermost mantle, the large crustal thickness variations, and the existence of high conductivity layer in the crust or/and upper mantle, and higher geothermal value. All these features are closely related to the collision between the Indian and the Asian plates. The crustal velocity in the Sichuan-Yunnan rhombic block generally shows normal.value or positive anomaly, while the negative anomaly exists in the area along the large strike-slip faults as the block boundary. It is conducive to the crustal block side-pressing out along the faults. In the major seismic zones, the seismicity is relative to the negative anomaly velocity. Most strong earthquakes occurred in the upper-mid crust with positive anomaly or normal velocity, where the negative anomaly zone generally exists below.

Acta Seismologica Sinica↗