Geology Reports⌕ Search

Geology topics

C. W. Naeser

Publications and source records attributed to C. W. Naeser.

At least 19 recordsLinked to original sources
USGS2016

Erosional and depositional history of the Atlantic passive margin as recorded in detrital zircon fission-track ages and lithic detritus in Atlantic Coastal plain sediments

Comparison of fission-track (FT) ages of detrital zircons recovered from Atlantic Coastal Plain sediments to FT ages of zircons from bedrock in source terranes in the Appalachians provides a key to understanding the provenance of the sediments and, in turn, the erosional and depositional history of the Atlantic passive margin. In Appalachian source terranes, the oldest zircon fission-track (ZFT) ages from bedrock in the western Appalachians (defined for this paper as the Appalachian Plateau, Valley and Ridge, and far western Blue Ridge) are notably older than the oldest ages from bedrock in the eastern Appalachians (Piedmont and main part of the Blue Ridge). The age difference is seen both in ZFT sample ages and in individual zircon grain ages and reflects differences in the thermotectonic history of the rocks. In the east, ZFT data indicate that the rocks cooled from temperatures high enough to partially or totally reset ZFT ages during the Paleozoic and (or) Mesozoic. The majority of the rocks are interpreted to have cooled through the ZFT closure temperature (∼235 °C) at various times during the late Paleozoic Alleghanian orogeny. In contrast, most of the rocks sampled in the western Appalachians have never been heated to temperatures high enough to totally reset their ZFT ages. Reflecting their contrasting thermotectonic histories, nearly 80 percent of the sampled western rocks yield one or more zircon grains with very old FT ages, in excess of 800 Ma; zircon grains yielding FT ages this old have not been found in rocks in the Piedmont and main part of the Blue Ridge. The ZFT data suggest that the asymmetry of zircon ages of exposed bedrock in the eastern and western Appalachians was in evidence by no later than the Early Cretaceous and probably by the Late Triassic. Detrital zircon suites from sands collected in the Atlantic Coastal Plain provide a record of detritus eroded from source terranes in the Appalachians during the Mesozoic and Cenozoic. In Virginia and Maryland, sands of Early Cretaceous through late early Oligocene age do not yield any old zircons comparable in age to the old zircons found in bedrock in the western Appalachians. Very old zircons yielding FT ages >800 Ma are only encountered in Coastal Plain sands of middle early Miocene and younger age. Miocene and younger fluvial-deltaic deposits associated with the major mid-Atlantic Coastal Plain rivers that now head in the western Appalachians (the Hudson, Delaware, Susquehanna, Potomac, James, and Roanoke) contain abundant clasts of fossiliferous chert and quartzite and other distinctive rock types derived from Paleozoic rocks of the western Appalachians. These distinctive clasts have not been reported in older Coastal Plain sediments. The ZFT and lithic detritus data indicate that the drainage divide for one or more east-flowing mid-Atlantic rivers migrated west into the western Appalachians, and the river(s) began transporting western Appalachian detritus to the Atlantic Coastal Plain, sometime between the late early Oligocene and middle early Miocene. By no later than late middle Miocene most if not all of the major rivers that now head west of the Blue Ridge were transporting western Appalachian detritus to the Coastal Plain. Prior to the drainage divide migrating into the western Appalachians, the ZFT data are consistent with the dominant source of Atlantic Coastal Plain sediments being detritus from the Piedmont and main part of the Blue Ridge, with possible input from distant volcanic sources. The ZFT data suggest that the rapid increase in the rate of siliciclastic sediment accumulation in middle Atlantic margin offshore basins that peaked in the middle Miocene and produced almost 30 percent of the total volume of post-rift siliciclastic sediments in the offshore basins began in the early Miocene when Atlantic river(s) gained access to the relatively easily eroded Paleozoic sedimentary rocks of the western Appalachians.

American Journal of Science↗
USGS2012

Implications of low-temperature cooling history on a transect across the Colorado Plateau-Basin and Range boundary, west central Arizona

Fission track ages of apatite and zircon from metamorphic, plutonic, and sedimentary rocks along a 80-km transect across the Colorado Plateau-Basin and Range boundary in west central Arizona show differences in the low-temperature cooling histories between the provinces. The transect extends from Cypress Mountain in the Colorado Plateau transition zone to the eastern Buckskin Mountains in the Basin and Range. Along the northeast margin of the Basin and Range province, metamorphic rocks exposed in the footwall of a major detachment fault system yield zircon and apatite fission track ages of 16–10 Ma. These ages are similar to K-Ar fusion ages of biotite and age minima of K-feldspar on 40 Ar/ 39 Ar age spectra and collectively indicate rapid cooling. One K-feldspar age spectrum has an age maximum of about 22.8 Ma, an age minimum of 11.8 Ma, and a spectrum whose shape is suggestive of reheating, possibly in middle Miocene time. The heating event was probably related to hydrothermal activity during emplacement of Cu and Mn deposits in and above the detachment fault zone. Effects of this heating are only locally detected in rocks above the detachment fault. In the Poachie Range fission track ages of apatite and zircon are 60–50 and 80–70 Ma, respectively. The disparity between the apatite and zircon ages indicates that the rocks cooled slowly in Late Cretaceous and early Tertiary time, probably due to gradual uplift and erosion. Total uplift and denudation in the area of the Poachie Range since Cretaceous time is 6 km or more. To the northeast of the range, fission track ages of apatite and zircon increase and diverge, indicating that apparent uplift decreased in that direction. The apatite ages from the Poachie Range are concordant with early Tertiary hornblende ages determined in other studies of lower plate rocks near the southwest end of the transect. The ages represent cooling of crystalline rocks after Cretaceous regional metamorphism and magmatism. Near Bagdad, 20 km northeast of the Poachie Range, 2 km or less of erosion has occurred since intrusion of high-level plutons and dikes and caldera formation in Late Cretaceous time. Remnants of an erosion surface that developed in middle Tertiary time are preserved in the transition zone. Volcanic and sedimentary rocks at least as old as early Miocene were deposited on the erosion surface and filled valleys cut into it. Dissection of these deposits began about 8 Ma. We interpret these data combined with those from other studies to indicate that in Cretaceous time southward thrusting and later extensive magmatism in the middle crust led to thickening and heating of the crust. The Cretaceous igneous rocks at Bagdad are high-level manifestations of this magmatism. Uplift and slow cooling occurred in Late Cretaceous and early Tertiary time. In late Oligocene and early Miocene time during northeast-southwest extension, middle crustal rocks moved southwest put from beneath the southwest margin of the transition zone. Tectonic denudation rapidly exposed the crust that had been brought up from a depth of 10 km or more and rapidly cooled in the eastern Buckskin and Harcuvar mountains. Middle Miocene reheating occurred locally in the lower plate, along the detachment, and in nearby parts of the upper plate.

Journal of Geophysical Research↗
USGS2012

The timing of uplift, volcanism, and rifting peripheral to the Red Sea: A case for passive rifting?

Prior to the formation of the Red Sea the northeastern Afro/Arabian continent had low relief and was largely below sea level from the Late Cretaceous to the early Oligocene. The events leading to the formation of the Red Sea followed the sequence (1) alkaline volcanism and rifting beginning about 30–32 Ma affecting a narrow linear zone in the continent, (2) rotational block faulting and detachment faulting, well underway by 25 Ma, (3) gabbro and diorite magmatism, andesite to rhyolite volcanism, and fine-grained nonmarine sedimentation in the rift between 20 and 25 Ma, (4) fine-grained marine sedimentation in the rift as the early shelves started to subside in the middle Miocene, and (5) uplift of the adjacent continents (about 3 km) and subsidence of the shelves (about 4 km) between 13.8 and 5 Ma. The youth of the uplift is suggested by 44 fission track dates on apatites from rocks of the Proterozoic Arabian Shield that range in age from 13.8 to 568 Ma. The youngest of these ages, coupled with the present high relief along the Arabian escarpment and published heat flow measurements, indicate that 2.5–4 km uplift has occurred in the last 13.8 m.y. The sequence volcanism/rifting followed by uplift leads to our adoption of a passive mantle model for rift origin. Models that require uplift to create the rift are rejected, because of the late uplift. We advocate a model of lithospheric extension caused by two-dimensional plate stress over those requiring tractional drag at the base of the lithosphere caused by vigorous flow in the asthenosphere. It is acknowledged that traction models could explain the observed data, but they imply a rigid, static lithosphere and seem to require a link between the direction of flow in the asthenosphere and plate motions. Neither requirement is necessary in the extension model. The rift starts with mechanical extension in a narrow zone of lithosphere between 25–32 Ma in our model. The thinned lithosphere is replaced by upwelling asthenosphere and by rocks from the adjacent deep continental lithosphere which flow into the rift. Ductile flow of the deep continental lithosphere is accelerated by partial melting as rocks flow upward toward the rift axis. Once partially melted, rocks formerly part of the continental lithosphere join the upwelling asthenosphere, resulting in a rapid erosion of the lithospheric mantle beneath the continent near the rift edge. The resulting density decrease explains the uplift. We think that the Red Sea began as a consequence of changing plate geometries resulting from the collision of India and Eurasia. After the collision, the segment of the Owens fracture zone north of the Carlsberg Ridge became locked, forcing the northeast corner of Afro/Arabia to rotate with the Indian plate away from the rest of Africa.

Journal of Geophysical Research Solid Earth↗
USGS2009

Fission-track ages from the Precambrian of Shropshire

Four samples of Longmyndian and Uriconian strata from S of Shrewsbury, England have been processed for apatite and/or zircon fission-track ages. The resultant ages illustrate how depth of burial may affect fission-track ages. The analytical procedures followed were as described in Naeser (1979).-from Authors

Geological Magazine↗
USGS2005

Contrasting tectonothermal domains and faulting in the Potomac terrane, Virginia-Maryland - Discrimination by 40Ar/39Ar and fission-track thermochronology

New 40Ar/39Ar data reveal ages and thermal discontinuities that identify mapped and unmapped fault boundaries in the Potomac terrane in northern Virginia, thus confirming previous interpretations that it is a composite terrane. The rocks of the Potomac terrane were examined along the Potomac River, where it has been previously subdivided into three units: the Mather Gorge, Sykesville, and Laurel Formations. In the Mather Gorge Formation, at least two metamorphic thermal domains were identified, the Blockhouse Point and Bear Island domains, separated by a fault active in the late Devonian. Early Ordovician (ca. 475 Ma) cooling ages of amphibole in the Bear Island domain reflect cooling from Taconic metamorphism, whereas the Blockhouse Point domain was first metamorphosed in the Devonian. The 40Ar/39Ar data from muscovites in a third (eastern) domain within the Mather Gorge Formation, the Stubblefield Falls domain, record thrusting of the Sykesville Formation over the Mather Gorge Formation on the Plummers Island fault in the Devonian. The existence of two distinctly different thermal domains separated by a tectonic boundary within the Mather Gorge argues against its status as a formation. Hornblende cooling ages in the Sykesville Formation are Early Devonian (ca. 400 Ma), reflecting cooling from Taconic and Acadian metamorphism. The ages of retrograde and overprinting muscovite in phyllonites from domain-bounding faults are late Devonian (Acadian) and late Pennsylvanian (Alleghanian), marking the time of assembly of these domains and subsequent movement on the Plummers Island fault. Our data indicate that net vertical motion between the Bear Island domain of the Mather Gorge complex and the Sykesville Formation across the Plummers Island fault is east-side-up. Zircon fission-track cooling ages demonstrate thermal equillbrium across the Potomac terrane in the early Permian, and apatite fission-track cooling ages record tilting of the Potomac terrane in the Cretaceous or later with the west side up at least 1 km. ?? 2005 Geological Society of America.

Geological Society of America Bulletin↗
USGS2004

Formation of a paleothermal anomaly and disseminated gold deposits associated with the Bingham Canyon porphyry Cu-Au-Mo system, Utah

The thermal history of the Oquirrh Mountains, Utah, indicates that hydrothermal fluids associated with emplacement of the 37 Ma Bingham Canyon porphyry Cu-Au-Mo deposit extended at least 10 km north of the Bingham pit. An associated paleothermal anomaly enclosed the Barneys Canyon and Melco disseminated gold deposits and several smaller gold deposits between them. Previous studies have shown the Barneys Canyon deposit is near the outer limit of an irregular distal Au-As geochemical halo, about 3 km beyond an intermediate Pb-Zn halo, and 7 km beyond a proximal pyrite halo centered on the Bingham porphyry copper deposit. The Melco deposit also lies near the outer limit of the Au-As halo. Analysis of several geothermometers from samples collected tip to 22 km north of the Bingham Canyon porphyry Cu-Au-Mo deposit indicate that most sedimentary rocks of the Oquirrh Mountains, including those at the gold deposits, have not been regionally heated beyond the "oil window" (less than about 150??C). For geologically reasonable heating durations, the maximum sustained temperature at Melco, 6 km north of the Bingham pit, and at Barneys Canyon, 7.5 km north of the pit, was between 100??C and 140??C, as indicated by combinations of conodont color alteration indices of 1.5 to 2, mean random solid bitumen reflectance of about 1.0 percent, lack of annealing of zircon fission tracks, and partial to complete annealing of apatite fission tracks. The pattern of reset apatite fission-track ages indicates that the gold deposits are located approximately on the 120??C isotherm of the 37 Ma paleothermal anomaly assuming a heating duration of about 106 years. The conodont data further constrain the duration of heating to between 5 ?? 104 and 106 years at approximately 120??C. The ??18O of quartzite host rocks generally increases from about 12.6 per mil at the porphyry to about 15.8 per mil approximately 11 km from the Bingham deposit. This change reflects interaction of interstitial clays in the quartzite with circulating meteoric water related to the Bingham Canyon porphyry system. The ??18O and ??13C values of limestone vary with respect to degree of recrystallization and proximity to open fractures. Recrystallized limestone at the Melco and Barneys Canyon gold deposits has the highest ??18O values (about 30???), whereas limestone adjacent to the porphyry copper deposit has the lowest values (about 10???). The high ??18O values for the recrystallized limestone at Barneys Canyon and Melco strongly suggest that mineralization was related to low temperature fluids with exceptionally high ??18OH2O values such as could be derived from water in a crater lake of an active volcano. The age of formation of the gold deposits has been interpreted to range from Jurassic to Eocene. The mineralized rocks at the Barneys Canyon and Melco deposits are likely the same age as the geochemically similar deposits that are present in north-striking, late faults that cut the Bingham Canyon porphyry. The patterns of apatite and zircon fission-track data, conodont color alteration indices, solid bitumen reflectivity, stable isotope data, and mineral zoning are consistent with the gold deposits being genetically related to formation of the 37 Ma Bingham porphyry deposit. We interpret the disseminated gold mineralization to be related to collapse of the Bingham Canyon hydrothermal system in which isotopically heavy, oxidizing, acidic waters, possibly from an internally draining acidic crater lake, mixed with and were entrained into reduced gold-bearing meteoric water fluids in the collapsing main-stage hydrothermal system. Most of this fluid mixing and cooling was probably located close to the hydrologic interface between the sedimentary basement rocks and overlying volcanic rocks. ??2004 by Economic Geology.

Economic Geology↗
USGS2003

Origin of the Blue Ridge escarpment along the passive margin of Eastern North America

The Blue Ridge escarpment is a rugged landform situated within the ancient Appalachian orogen. While similar in some respects to the great escarpments along other passive margins, which have evolved by erosion following rifting, its youthful topographic expression has inspired proposals of Cenozoic tectonic rejuvenation in eastern North America. To better understand the post-orogenic and post-rift geomorphic evolution of passive margins, we have examined the origin of this landform using low-temperature thermochronometry and manipulation of topographic indices. Apatite (U-Th)/He and fission-track analyses along transects across the escarpment reveal a younging trend towards the coast. This pattern is consistent with other great escarpments and fits with an interpretation of having evolved by prolonged erosion, without the requirement of tectonic rejuvenation. Measured ages are also comparable specifically to those measured along other great escarpments that are as much as 100 Myr younger. This suggests that erosional mechanisms that maintain rugged escarpments in the early post-rift stages may remain active on ancient passive margins for prolonged periods. The precise erosional evolution of the escarpment is less clear, however, and several end-member models can explain the data. Our preferred model, which fits with all data, involves a significant degree of erosional escarpment retreat in the Cenozoic. Although this suggests that early onset of topographic stability is not required of passive margin evolution, more data are required to better constrain the details of the escarpment's development.

Blue Ridge escarpment↗
USGS2002

Tertiary cooling and tectonic history of the White River uplift, Gore Range, and western Front Range, central Colorado: Evidence from fission-track and 39Ar/ 40Ar ages

Apatite fission-track (AFT) data from Proterozoic and Paleozoic rocks in the mountains of north central Colorado (White River Uplift, Gore Range, and western Front Range) record significant cooling that began with uplift and erosion related to the Laramide Orogeny and continued through the Tertiary to Pliocene time. The mountains immediately flanking the Blue River half graben (Williams Fork Mountains to the east and the Gore Range to the west) cooled significantly during the Neogene. The AFT ages along the flanks of the Blue River half graben are significantly younger than AFT ages farther to the east in the central and eastern Front Range and to the west in the White River uplift. In both of these areas, the apatite ages suggest Laramide cooling. The Williams Fork Mountains–Gore Range zone of young AFT ages extends southward adjacent to the axis of the Rio Grande rift through southern Colorado and New Mexico. These young ages result from a combination of elevated heat flow, uplift, and erosion along the axis of the Rio Grande rift during Neogene time. Zircons from Proterozoic rocks yield Proterozoic fission-track ages, indicating that this part of the Colorado basement has not been heated to temperatures 200 C since Middle Proterozoic time. A sanidine 40 Ar/ 39 Ar age of 27 Ma from a rhyolite tuff just above a basal boulder conglomerate of the Troublesome Formation in a tilted fault block within the Blue River half graben shows that Tertiary deposition started there in middle Oligocene time. Xenocrystic sanidine from a basalt stratigraphically higher than the rhyolite tuff has an age of 24 Ma. Thus, the basalt is significantly younger than its postulated source, the 32 Ma laccolithic complex at Green Mountain.

Colorado↗
USGS1999

Age constraints on Jerritt Canyon and other Carlin-type gold deposits in the western United States-relationship to mid-Tertiary extension and magmatism

Carlin-type gold deposits are difficult to date and a wide range of ages has been reported for individual deposits. Therefore, several methods were employed to constrain the age of the gold deposits in the Jerritt Canyon district. Dated igneous rocks with well-documented crosscutting relationships to ore provided the most reliable constraints. K/Ar and 40 Ar/ 39 Ar dates on igneous rocks are as follows: andesite dikes 324 Ma, sericitic alteration in andesite dikes 118 Ma, basalt dikes 40.8 Ma, quartz monzonite dikes 39.2 Ma, and calc-alkaline ignimbrites 43.1 to 40.1 Ma. Of these, only the andesite and basalt dikes are clearly altered and mineralized. The gold deposits are, therefore, younger than the 40.8 Ma basalt dikes. The sericitic alteration in the andesite dikes is unrelated to the gold deposits. A number of dating techniques did not work. K/Ar and 40 Ar/ 39 Ar dates on mica from mineralized Ordovician to Devonian sedimentary rocks gave misleading results. The youngest date of 149 Ma from the smallest <0.1-mu m-size fraction shows that the temperature (120 degrees -260 degrees C) and duration (?) of hydrothermal activity was insufficient to reset preexisting fine-grained micas in the host rocks. The temperature and duration was also insufficient to anneal fission tracks in zircon from Ordovician quartzites as they yield Middle Proterozoic dates in both mineralized and barren samples. Apatites were too small for fission track dating. Hydrothermal sulfides have pronounced crustal osmium isotope signatures ( 187 Os/ 188 Os initial = 0.9-3.6) but did not yield a meaningful isochron due to very low Re and Os concentrations and large analytical uncertainties. Paleomagnetic dating techniques failed because the hydrothermal fluids sulfidized nearly all of the iron in the host rocks leaving no remnant magnetism.When published isotopic dates from other Carlin-type deposits in Nevada and Utah are subject to the rigorous evaluation developed for the Jerritt Canyon study, most deposits can be shown to have formed between 42 and 30 Ma. K/Ar and 40 Ar/ 39 Ar dates on the youngest preore igneous rocks range from 41 to 32 Ma, whereas the oldest postore igneous rocks range from 35 to 33 Ma. Hydrothermal adularia from the Twin Creeks deposit yields similar 40 Ar/ 39 Ar dates of 42 Ma. K/Ar dates on supergene alunite range from 4 to 30 Ma. K/Ar and 40 Ar/ 39 Ar dates on micas separated from sedimentary (395-43 Ma) and igneous (145-38 Ma) rocks are usually much older than the gold deposits and most are suspect because they are from incompletely reset preore micas or from mixtures of preore and ore-stage mica. Fission track dates on zircons are also generally older than the deposits (169-35 Ma) and are not completely reset by mineralization. Apatites are likley to be reset by the hydrothermal systems (and by younger thermal events) and yield dates (83-22 Ma) that are younger than those from zircon. Independent support of a mid-Tertiary age is provided by the low delta D (sub H 2 O) values of hydrothermal fluids from 10 widely separated Carlin-type deposits (-134 + or - 23ppm). The low delta D (sub H 2 O) values are consistent with a mid-Tertiary age when the climate was cool but are inconsistent with the Cretaceous and Jurassic ages favored by some workers when the climate was warm. The age and distribution of Carlin-type deposits coincides with areas that underwent extension and calc-alkaline magmatism over the same time period. Despite this relationship, the deposits lack clear spatial or genetic relationships to mid-Tertiary epizonal plutons. Rather, many deposits are localized along preexisting crustal fault zones. In the Getchell trend, structures tapped deep-sourced metamorphic (or magmatic) fluids and subsequently variably exchanged meteoric water. In the other trends and districts only variably exchanged meteoric water has been detected. These relationships suggest either that all of the deposits formed from deep-sourced fluids and were subsequently flooded by meteoric water, or, that fluids from different sources evolved to produce deposits with similar charateristics.

Economic Geology↗
USGS1996

The age and thermal history of Cerro Rico de Potosi, Bolivia

Cerro Rico de Potosi, Bolivia, is the world's largest silver deposit and has been mined since the sixteenth century for silver, and for tin and zinc during the twentieth century, together with by-product copper and lead. The deposit consists primarily of veins that cut an altered igneous body that we interpret to be a dacitic volcanic dome and its underlying tuff ring and explosion breccia. The deposit is compositionally and thermally zoned, having a core of cassiterite, wolframite, bismuthinite, and arsenopyrite surrounded by a peripheral, lower-temperature mineral assemblage consisting principally of sphalerite, galena, lead sulfosalt, and silver minerals. The low-temperature assemblage also was superimposed on the high-temperature assemblage in response to cooling of the main hydrothermal system. Both the dacite dome and the ore fluids were derived from a larger magmatic/hydrothermal source at depth. The dome was repeatedly fractured by recurrent movement on the fault system that guided its initial emplacement. The dome was extruded at 13.8 ± 0.2 Ma (2σ), based on U-Th-Pb dating of zircon. Mineralization and alteration occurred within about 0.3 my of dome emplacement, as indicated by a 40 Ar/ 39 Ar date of 13.76 ± 0.10Ma (1σ) for sericite from the pervasive quartz-sericite-pyrite alteration associated with the main-stage, high-temperature, mineralization. The last thermal event able to reset zircon fission tracks occurred no later than 12.5 ± 1.1 Ma (1σ), as indicated by fission-tract dating. Minor sericite, and magmatic-steam alunite veins, were episodically formed around 11 Ma and between 8.3 and 5.7 Ma; the younger episodes occurring at the time of extensional fracturing at Cerro Rico and wide-spread volcanism in the adjacent Los Frailes volcanic field. None of these younger events appear to be significant thermal/mineralizing events; the exceptionally flat thermal release pattern of 39 Ar from sericite and the results of the fission-tract dating of zircon show that none of the younger events was hot enough, and lasted long enough, to cause significant loss of Ar or annealing of zircon fission tracks. U-Th-Pb dating of zircon cores indicates a Precambrian progenitor for some zircons, and REE analyses of dated samples of hydrothermally altered dacite show the presence of a prominent positive Eu anomaly, which constrains interpretations of the origin and evolution of the magmatic/hydrothermal system.

Cerro Rico de Potosi↗
USGS1994

Hydrothermal alteration and mass exchange in the hornblende latite porphyry, Rico, Colorado

The Rico paleothermal anomaly, southwestern Colorado, records the effects of a large hydrothermal system that was active at 4 Ma. This hydrothermal system produced the deep Silver Creek stockwork Mo deposit, which formed above the anomaly's heat source, and shallower base and precious-metal vein and replacement deposits. A 65 Ma hornblende latite porphyry is present as widespread sills throughout the area and provided a homogenous material that recorded the effects of the hydrothermal system up to 8 km from the center. Hydrothermal alteration in the latite can be divided into a proximal facies which consists of two assemblages, quartz-illite-calcite and chlorite-epidote, and a distal facies which consists of a distinct propylitic assemblage. Temperatures were gradational vertically and laterally in the anomaly, and decreased away from the centra heat source. A convective hydrothermal plume, 3 km wide and at least 2 km high, was present above the stock-work molybdenum deposit and consisted of upwelling, high-temperature fluids that produced the proximal alteration facies. Distal facies alteration was produced by shallower cooler fluids. The most important shallow base and precious-metal vein deposits in the Rico district are at or close to the boundary of the thermal plume. Latite within the plume had a large loss of Na2O, large addition of CaO, and variable SiO2 exchante. Distal propylitized latite samples lost small amounts of Na2O and CaO and exchanged minor variable amounts of SiO2. The edge of the plume is marked by steep Na2O exchange gradients. Na2O exchange throughout the paleothermal anomaly was controlled by the reaction of the albite components in primary plagioclase and alkali feldspars. Initial feldspar alteration in the distal facies was dominated by reaction of the plagioclase, and the initial molar ratio of reactants (alkali feldspar albite component to plagioclase albite component) was 0.35. This ratio of the moles of plagioclase to alkali feldspar albite components that reacted evolved to 0.92 as the reaction progressed. Much of the alkali feldspar albite component in the proximal facies reacted while the, primary plagioclase was still unreacted, but the ratio for these assemblages increased to 1.51 when the plagioclase entered the reaction paragenesis. Plagioclase reaction during distal propylitic alteration resulted in pseudomorphic albite mixed with illite and a loss of Na2O. CaO is lost in the distal facies as hornblende reacts to chlorite, although some calcium may be fixed in calcite. CaO is added to the proximal facies as the quantity of chlorite replacing hornblende increases and epidote and calcite are produced. ?? 1994 Springer-Verlag.

Contributions to Mineralogy and Petrology↗
USGS1993

Possible secondary apatite fission track age standard from altered volcanic ash beds in the middle Jurassic Carmel Formation, Southwestern Utah

Secondary age standards are valuable in intra- and interlaboratory calibration. At present very few such standards are available for fission track dating that is older than Tertiary. Several altered volcanic ash beds occur in the Middle Jurassic Carmel Formation in southwestern Utah. The formation was deposited in a shallow marine/sabhka environment. Near Gunlock, Utah, eight ash beds have been identified. Sanidines from one of the ash beds (GUN-F) give a single-crystal laser-probe 40Ar/39Ar age of 166.3??0.8 Ma (2??). Apatite and zircon fission track ages range from 152-185 Ma with typically 15-20 Ma errors (2??). Track densities in zircons are high and most grains are not countable. Apatites are fairly common in most of the ash beds and have reasonable track densities ranging between 1.2-1.5 ?? 106 tracks/cm2. Track length distributions in apatites are unimodal, have standard deviations <1??m, and mean track lengths of about 14-14.5 ??m. High Cl apatites (F:Cl:OH ratio of 39:33:28) are particularly abundant and large in ash GUN-F, and are fairly easy to concentrate, but the concentrates contain some siderite, most of which can be removed by sieving. GUN-F shows evidence of some reworking and detriaal contamination based on older single grain 40Ar/39Ar analyses and some rounding of grains, but the apatite population appears to be largely uncontaminated. At present BJK has approximately 12 of apatite separate from GUN-F. ?? 1993.

Nuclear Tracks and Radiation Measurements↗
USGS1993

Results of interlaboratory comparison of fission track ages for 1992 fission track workshop

Two apatites and one sphene were made available to the fission track research community for analysis prior to the 1992 Fission Track Workshop held in Philadelphia, U.S.A., 13-17 July. Eighteen laboratories throughout the world received aliquots of apatite and sphene. To date, analyses by 33 different scientists have been representing 15 different laboratories. With respect to the previous two interlaboratory comparisons, there is a noticeable improvement in the accuracy of the age results (Naeser and Cebula, 1978; Naeser et al., 1981; Miller et al., 1985;Miller et al.1990). Ninety-four percent of the analysis used the external detector method (EDM) combined with the zeta technique while the remaining individuals used the population method (POP). Track length measurements (requested for the first time in the interlaboratory comparison studies) were in relatively good agreement. ?? 1993.

Nuclear Tracks and Radiation Measurements↗
USGS1992

The Pearlette family ash beds in the Great Plains: Finding their identities and their roots in the Yellowstone country

For many years the numerous deposits of so-called 'Pearlette volcanic ash' in the Great Plains region of the United States were considered to be the remnants of the same volcanic event, and were used as a time-stratigraphic marker of probable Middle Pleistocene age. Although a few early workers had suggested that more than one air-fall event might be represented among the Pearlette occurrences, it was not until the latter half of the present century, after identification of volcanic ash beds by detailed chemical and mineralogical methods had been developed, that it could be established that the 'Pearlette family' of volcanic ashes included three ash beds of subtly differing characteristics. Development of isotopic methods of age determination has established that the ages of the three are significantly different (2.09, 1.29, and 0.60 Ma). The area of distribution of the Pearlette family ash beds was found to include not only the Great Plains, but also to extend across the Rocky Mountain and the Basin and Range provinces to the Pacific Ocean. The search for the sources of these three similar appearing ash beds, facilitated greatly by information gained from concurrent mapping projects underway in areas of major Late Cenozoic volcanic activity in western United States, ultimately led to the sites of the caldera-forming eruptions in the Yellowstone National Park region. ?? 1992.

Quaternary International↗
USGS1991

Tertiary fission-track ages from the Bagua syncline (northern Peru): Stratigraphic and tectonic implications

The results of five zircon fission-track ages of volcanic tuffs intercalated within the continental deposits of the Bagua syncline (northern Peru) are reported. These 2500-meter-thick deposits overlie mid-Campanian to lower Maastrichtian fine-grained red beds (Fundo El Triunfo Formation). The disconformable fluvial conglomerates of the Rentema Formation are associated with a 54 Ma tuff (upper Paleocene-lower Eocene?) and would reflect the Inca-1 tectonic phase. The Sambimera Formation (Eocene to mid-Miocene) is a coarsening-upward sequence (from lacustrine to fluvial) that contains three volcanic tuffs of 31, 29, and 12 Ma, respectively. A probable stratigraphic gap, upper Eocene-lower Oligocene, would be related to the late Eocene Inca-2 phase. Neither deformation nor sedimentary discontinuity has been recognized so far. However, the lacustrine to fluvial transition could relate to the late Oligocene Aymara tectonic phase. The unconformable fanglomerates and fluvial deposits of the San Antonio Formation contain in their upper part a 9 Ma tuff (mid-to upper Miocene), and thier base records a major tectonic event (Quechua-2 phase?). The unconformable fanglomerates of the Tambopara Formation date the folding of the Bagua syncline, which could be ascribed to the latest Miocene Quechua-3 tectonics. These formations are correlative with comparable deposits in the sub-Andean basins, suggesting that these eastern areas underwent strong tectonic subsidence of the foreland basin type since mid-Miocene times.

Journal of South American Earth Sciences↗