Geology topics
Publications and source records attributed to C. Erwin Brown.
Explore the source record for details and available documents.
Correlation analysis in conjunction with principal-component and multiple-regression analyses were applied to laboratory chemical and petrographic data to assess the usefulness of these techniques in evaluating selected physical and hydraulic properties of carbonate-rock aquifers in central Pennsylvania. Correlation and principal-component analyses were used to establish relations and associations among variables, to determine dimensions of property variation of samples, and to filter the variables containing similar information. Principal-component and correlation analyses showed that porosity is related to other measured variables and that permeability is most related to porosity and grain size. Four principal components are found to be significant in explaining the variance of data. Stepwise multiple-regression analysis was used to see how well the measured variables could predict porosity and (or) permeability for this suite of rocks. The variation in permeability and porosity is not totally predicted by the other variables, but the regression is significant at the 5% significance level.
More than 3,200 indoor radon-222 (222Rn) measurements were made seasonally in an area of about 1,000 square kilometers of the Coastal Plain and Piedmont physiographic provinces in Virginia, U.S.A. Results of these measurements indicate that some geological units are associated, on the average, with twice as much indoor222Rn as other geological units, and that indoor222Rn varies seasonally. The Kruskal-Wallis test was used to test whether indoor222Rn concentrations for data gathered over the winter and summer seasons differ significantly by rock unit. The tests concluded that indoor222Rn concentrations for different rock units were not equal at the 5-percent significance level. The rocks associated with the highest median indoor222Rn concentration are specific rocks in the Mesozoic Culpeper basin, including shale and siltstone units with Jurassic diabase intrusives, and mica schists in the Piedmont physiographic province. The pre-Triassic Peters Creek Schist has the highest ranking in terms of indoor222Rn concentration. The rocks associated with the lowest indoor222Rn concentrations include coastal plain sediments, the Occoquan Granite, Falls Church Tonalite, Piney Branch Mafic and Ultramafic complex, and unnamed mafic and ultramafic inclusions, respectively. The rocks have been ranked according to observed222Rn concentration by transforming the average rank of indoor222Rn concentrations to z scores. ?? 1992 Springer-Verlag New York Inc.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Veins composed mainly of calcite and some galena, sphalerite, fluorite, and other minerals are widespread in the Frontenac axis area of New York and Ontario. In New York, the veins (Fig. 1) occur mainly west and northwest of Gouverneur (Brown, 1983). The veins, mined in the 1800s for lead, were first described by Emmons (1838). Smyth (1903) called these the "Rossie lead veins," a name now used locally for all veins of this type. Similar veins in southeastern Ontario were described by Uglow (1916) and Sangster (1970). The steeply dipping veins are aligned along extensional fractures in metamorphic rocks of the Grenville Complex and in Paleozoic sedimentary rocks, including the Potsdam Sandstone of Late Cambrian age, and limestones as young as Middle Ordovician. However, the age of emplacement of Rossie veins is unknown. The veins are mineralogically simple, consisting of calcite (~95%) with minor and approximately equal amounts of sphalerite and galena, and sparse fluorite, barite, celestite, and chalcopyrite (Brown, 1983). Paragenetically early minerals are crushed and granulated; later undeformed minerals fill open spaces (Fig. 2). Sandstone dikes that originated from either the overlying Potsdam Sandstone or stratigraphically higher arenaceous rocks cut into the Rossie veins and occupy all available space. Their unstratified nature suggests that sand was intruded under high hydraulic pressure during tectonic events that reopened the veins. Most veins are vertical and narrow (1-3 cm wide) and those that were mined are as much as 1.7 m wide. The veins trend mainly northwest-southeast but have a local east-west orientation. The fractures and veins show evidence of strike-slip faulting with a right-lateral offset due to late reactivation of north-east-trending faults that originally formed during the Proterozoic Grenville orogeny. Relatively rare inclined veins, termed gash veins (Brown, 1983), occur in proximity to some of the regional northeast-trending faults. These veins contain open spaces lined with large, undeformed crystals of calcite (~90%) and green fluorite (~5%). The minerals of the northeast-trending gash veins, which dip to the northwest, are believed to be paragenetically late results of the same mineralization and tectonic event that produced the Rossie veins. For example, the green fluorite in the gash veins is similar in color and occurrence to small fluorite crystals in vugs in the vertical Rossie veins. Associated with the fluorite in both occurrences is coarse crystalline calcite containing tiny tetrahedra of chalcopyrite aligned along crystallographic planes. The present study of fluid inclusions and lead isotopes was done to understand better the nature and possible source of the mineralizing solutions for both vertical and gash veins and the possible origin of the lead and zinc mineralization. Large deposits of essentially syngenetic sphalerite with minor to trace galena occur in the Proterozoic rocks of this region (e.g., Balmat-Edwards, New York). Although none of these deposits are known in the immediate vicinity of Rossie veins, the possibility that Rossie veins contain remobilized metals from these older deposits was considered.
Sixty-two Schlumberger electrical soundings were made in the Durham Triassic basin in an effort to determine basin structural geometry, depth of the sedimentary layers, and spatial distribution of individual rock facies. A digital computer program was used to invert the sounding curves of apparent resistivity versus distance to apparent resistivity versus depth. The apparent-resistivity-versus-depth data from the computer-modeling program were used to construct a geoelectric model of the basin that is believed to accurately represent the subsurface geology of the basin. The largest depth to basement in the basin along a resistivity profile (geoelectric section) was determined to be 1,800 m. A resistivity decrease was observed on certain soundings from depths of 100 to 1,000 m; below a 1,000-m depth, apparent resistivity increased to the bottom of the basin. Resistivity values for basement rocks were greater than 1,000 ohm-m and less than 350 ohm-m for the sedimentary layers in the basin. The data suggest that the basin contains a system of step faults near its eastern boundary.
Red uvite containing up to 4.34 wt.% MnO is found in the Arnold talc mine near Fowler, New York, USA. Microprobe analyses give a composition of 51% uvite in the uvite-dravite series. Associated minerals in this manganiferous metamorphic assemblage (possibly an evaporite) are manganese-rich tremolite (hexagonite) braunite and quartz.-R.A.G.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
A detailed geologic study was begun in 1951 by the U.S. Geological Survey in cooperation with the Iowa Geological Survey to appraise the potentialities of the Iowa part of the Wisconsin-Illinois-Iowa zinc-lead district for (1) zinc ore in rock strata that contain pitch-and-flat zinc ore bodies elsewhere in the mining district and (2) joint-controlled lead and zinc ore like that mined extensively during the 19th century in Dubuque County, Iowa. This investigation is an outgrowth of a geologic study of the entire district, begun in 1942 by the U.S. Geological Survey.
No abstract available.
Geologic investigations were begun in Iowa to appraise; (1) the possible occurrence of zinc ore in strata that elsewhere in the Upper Mississippi Valley zinc-lead district have been the principal sites of zinc concentration; and (2) lead ore of the type known as "crevice deposits," which were mined so extensively during the 19th century in Dubuque County, Iowa, but have been mined very little since 1910.