Geology topics

C. Özgen Karacan

Publications and source records attributed to C. Özgen Karacan.

At least 19 recordsLinked to original sources

USGS2026

Remote sensing enables basin-scale inventories of coal mine methane

Underground coal mines are important global sources of methane, but emission estimates are uncertain. We show that emission estimates for individual mines from aircraft remote-sensing surveys in the United States agree within 40% with direct measurements used for national emission reporting (IPCC Tier 3 estimate). Such direct measurements are unavailable in most countries, which rely on estimated emission factors (EFs) applied to coal-production rates. We find that EFs from IPCC Tier 1 and the Model for Calculating Coal Mine Methane (MC2M) methods overestimate U.S. emissions 3-fold due to incorrect dependence on mine depth. An IPCC Tier 2 method using measured basin-specific mine gas content agrees with direct emission measurements but does not account for gob well emissions and requires gas content data that are generally unavailable. We show that aircraft remote sensing for a small sample of mines can successfully estimate basin-specific EFs for ventilation shafts and gob wells, enabling estimates of basin- and national-scale emissions. We discuss how the method can be applied with satellite remote sensing to quantify coal emissions worldwide.

Alabama, Colorado, Kentucky, New Mexico, Ohio, Pen↗

USGS2026

Inference of pattern-based geological CO2 sequestration and oil recovery potential in a commingled main pay and residual oil zone CO2-EOR flood

Several detailed studies have shown that residual oil zones (ROZs) can present significant resources for additional hydrocarbon recovery as well as subsurface carbon dioxide (CO 2 ) sequestration via enhanced oil recovery by injecting CO 2 (CO 2 -EOR). Field development strategies included new wells drilled dedicated to main pay zones (MPZ) and ROZs, or existing wells in MPZs deepened to ROZs for commingled injection-production using different well patterns. The latter presented a challenge when discerning the injection and production from each of the zones, and for subsequent quantification of CO 2 sequestration and EOR potential from different patterns and from the field. In this paper, an innovative method for analyzing commingled injections and productions from MPZs and ROZs, with application to pattern-based data from four staggered line drive patterns in Wasson Field's Denver Unit, Texas, USA, was developed. Decline curve and ratio-trend methods were used as means of history-matching and forecasting. Cumulative production-time and cumulative production-rate data for oil, gas, and water, as well as water-oil ratio (WOR) and gas-oil ratio (GOR), were analyzed along with injection data for time intervals covering major injection events in MPZ, or MPZ and ROZ combined. A combined analysis enabled inference of allocation of fluids into different zones during WAG (water alternating gas) injection and thereby estimation of CO 2 storage, utilization, and retention in different zones as a function of total injection. Results show that ROZs generally present higher CO 2 sequestration potential compared to MPZs, and a comparable incremental oil recovery factor of ∼20%, on average. Results based on ratio analysis further show that while the WOR trend of the pattern production is mostly dominated and controlled by ROZ, GOR is controlled by both intervals. Although the method relying on decline curves and the approach used in zonal fluid allocations are subject to their limitations, this study presents a practical and innovative well-pattern-based method to infer and forecast CO 2 sequestration and oil recovery quantities and fluid ratios from MPZs and ROZs in commingled operations and highlight the added potential offered by ROZs.

Texas↗

USGS2026

Spatio-temporal modeling for assessing geoenergy resources: A workflow applied to gas in place variation in coal beds

The ability to estimate spatio-temporal changes in hydrocarbon reservoir properties and energy resources within pore volumes is essential for optimizing production, reservoir management, geologic energy storage, and safety in underground mining operations. In coal seams, predicting remaining methane gas-in-place (GIP) is critical for quantifying producible gas and improving mine safety and productivity through effective ventilation planning. Although such changes are commonly evaluated using physics-based numerical simulation models, these approaches often require extensive data, calibration effort, and time. This study presents a spatio-temporal geostatistical modeling approach that bridges the gap between purely spatial models and full numerical simulations. The method is applied to a case study of coal seam degasification in the Mary Lee coal group, Black Warrior Basin, Alabama, USA, to estimate GIP evolution over time within a selected mining district. The analysis uses published data from prior natural gas production history-matching of degasification using vertical wells. Empirical spatial and temporal statistics were calculated for reservoir pressure and water saturation, and spatio-temporal variogram models were fitted to experimental variograms. These models provided the structural basis for spatio-temporal kriging, integrated with spatial estimates of time-invariant parameters (porosity, density, and thickness) to estimate GIP. This approach enabled estimation of GIP changes over time, including periods without data. Boxplots of GIP estimates indicated systematic depletion and decreasing spatial variability, reflecting the impacts of degasification. Comparison with cumulative gas production from empirical well records showed approximately 85% agreement based on a relative similarity metric. Spatio-temporal GIP estimates were also used to estimate methane emissions to longwall ventilation systems and compared with reported emissions from the U.S. EPA Greenhouse Gas Reporting Program, showing similar distributions (≈80%) given data limitations. Overall, this integrated modeling approach provides time-dependent GIP estimates with broader implications for resource assessment applications.

Alabama↗

USGS2025

Estimated ultimate recovery (EUR) Prediction for Eagle Ford Shale using integrated datasets and artificial neural networks

The estimated ultimate recovery (EUR) is an important parameter for forecasting oil and gas production and informing decisions regarding field development strategies. In this study, we combined site-specific geologic, completion, and operational parameters with the predictive capabilities of machine learning (ML) models to predict EURs of the wells for the Eagle Ford Marl Continuous Oil Assessment Unit. We developed an extensive dataset of wells that have produced from the lower and upper Eagle Ford Shale intervals and reduced the model complexity using principal component analysis. We tested the ML models and estimated the sensitivities of ML-predicted EURs to changes in the values of different input variables. The results of applying the optimized ML model to the Eagle Ford suggest that the approach developed in this study could be promising. The ML estimates of the EURs fit the DCA-based values with an R 2 ~ 0.9 and a mean absolute error of ~36 × 10 3 bbl. In the lower Eagle Ford Shale, the EUR estimates were found to be most sensitive to changes in porosity, net thickness of the interval, clay volume, and the API gravity of the oil; and that in the upper Eagle Ford Shale they were most sensitive to changes in the total organic carbon and water saturation, which suggests that it could be important to consider these parameters in assessing these intervals or close analogs.

Louisiana, Mississippi, Texas↗

USGS2025

Performance analysis of oil recovery and CO2 retention in a greenfield residual oil zone: CO2-EOR in Tall Cotton Field (Permian Basin, West Texas, USA)

Residual oil zones (ROZs) can offer significant oil resources via enhanced oil recovery (EOR) as well as subsurface carbon dioxide (CO 2 ) retention during injection. If injected CO 2 is anthropogenic, the ROZs can offer a substantial geologic storage potential. The ROZs below the oil/water contact (OWC) of main pay zones (MPZ) in conventional reservoirs or brownfields, are more commonly developed for CO 2 injection and oil production and reported in the literature. However, CO 2 -EOR in greenfield ROZs, reservoirs without a MPZ present, have rarely been developed for CO 2 -EOR operation. The Tall Cotton Field of West Texas, Permian Basin, which started production in 2015 (Phase 1) and expanded in 2017 (Phase 2) from the San Andres Limestone, is one of the first examples of greenfield ROZs developed for EOR by injecting CO 2 . This paper analyses EOR and CO 2 retention performance of Tall Cotton Field using allocated injection and production data from inverted 5-spot well patterns of Phase-1 and -2 developments. Production and injection data allocated to each of the 28 identified patterns (nine 20-acre patterns for Phase-1, three 20-acre and sixteen 10-acre patterns for Phase-2) were analyzed for historical and forecasted oil recovery using ratio-trend decline analysis, and for CO 2 retention performance of the patterns. The allocated data were further used to calculate injected reservoir pore volume and void replacement ratios (VRR) for the analysis period. Quantitative results indicated that oil recovery factors of the 5-spot patterns varied between 4–10 %, and 5–30 % between the end of injection and the forecast periods, respectively. Storage of CO 2 , on the other hand, increased to a mean value of ∼7130 MMscf per pattern in Phase-1 and to a mean storage of 3700 MMscf per pattern in Phase-2 until the end of injection, followed by a decline after the end of injection and into the forecast period. Resulting CO 2 utilization factors ∼6–50 Mscf/bbl were estimated at the end of injection. Overall, presented results suggested that developing greenfield ROZs for CO 2 -EOR can be as promising as brownfield ROZs and mature MPZs for EOR and underground storage of injected CO 2 . For Tall Cotton Field, results suggest that Phase-2 patterns generally outperformed Phase-1 for oil recovery factors, while Phase-1 performed better in CO 2 retention performance metrics. This is the first study in the literature that reports a detailed CO 2 -EOR performance analysis of a greenfield ROZ in the Permian Basin, which can potentially allow for comparison with MPZs and brownfield ROZs.

Texas↗

USGS2025

Temporal and spatial comparison of coal mine ventilation methane emissions and mitigation quantified using PRISMA satellite data and on-site measurements

Emission monitoring at the facility level (bottom-up, BU) is key for accurate reporting of coal mine methane (CMM) emissions. Recent advances in aerial and satellite observations (top-down, TD) indicate that these methods have the potential to support CMM emissions monitoring and reporting of, as well as track the effectiveness of, mitigation actions. That said, studies have shown discrepancies between BU and TD estimations. Performing TD monitoring with concurrent BU measurements at the same mines may help address the observed discrepancies and improve quantification methods to narrow the gap between BU and TD data. This paper presents a comparison of concurrent BU-TD methane emission fluxes monitored from two ventilation shafts at a southwestern Virginia, USA, longwall mine to complement the existing body of studies on satellite-based monitoring of coal mines by incorporating continuous ground-based monitoring with concurrent TD monitoring of methane emission fluxes to address the gap and provide valuable insights into temporal emission patterns. The shafts were monitored on multiple dates between 2020 and 2023. BU monitoring was performed at the exhaust fans, while TD quantifications used PRISMA hyperspectral satellite data and two different wind reanalysis datasets (i.e., GEOS-FP and ERA5). This mine also offered a unique opportunity for BU-TD comparisons before and after ventilation air methane (VAM) oxidizer operation, which was installed at one of the shafts in 2022. The results showed that TD-estimated mean fluxes were generally lower than BU data, which were attributed to quantification difficulties associated with the low albedo caused by heavy vegetation and the terrain of the area. However, despite the discrepancies in mean emissions, both the interquartile range and the data range of the distributions generally overlapped, and the estimates correctly showed the emission trends.

Virginia↗

USGS2025

Waning greenhouse gas emissions from U.S. Federal lease coal production by the mid-21st century

This study presents estimates of future years (2024–2051) United States Federal lease coal production and the resulting greenhouse gas (GHG) emissions from the combustion, transport, and mining of that fuel. Results from the coal production estimate indicate a decline in production from Federal leases; with known production of 240 million short tons (mtn) in 2023 and a projected decline to 34.0 mtn by 2051, which represents a reduction to 14.2% of the 2023 value. In parallel with this projection, total GHG emissions are estimated to decrease from 402.2 million metric tons of carbon dioxide equivalent (MMT CO 2 eq.) in 2024 to 55.0 MMT CO 2 eq. in 2051, a decline to 13.7% of 2024 emissions estimates. The reductions in coal production and emissions are mainly the result of planned coal combustion power plant closures, with major projected closures in 2037 and 2048. However, GHG emissions estimates for future years can be uncertain as they rely heavily on coal production estimates from operators' public business plans and other publicly available resources. Forward looking plans of this type are subject to significant changes if economic and political factors deviate from current information. Results suggest that average GHG emissions over the time series breakout to 95% end point combustion, 3.7% transportation combustion emissions, and 1.3% fugitive emissions, although there is uncertainty associated with these figures. Uncertainty stemming from production projections, sector distributions, and emissions factors on the future emissions estimates increases with time, ranging from −28% to +48% within the 2024–2051 timeframe.

Alabama, Colorado, Montana, North Dakota, Utah, Wy↗

USGS2024

Exploring the uncertainty of machine learning models and geostatistical mapping of rare earth element potential in Indiana coals, USA

Rare earth elements and yttrium (REEs) have a wide range of applications in high- and low-carbon technologies. The strategic significance of REEs has grown due to their expanding applications in manufacturing industries and the constrained availability of these essential resources. This research explores the applicability of machine learning models and their uncertainty for assessing the REE potential in coal beds using various coal parameters as inputs. The work focuses on developing a predictive model based on geological variables, excluding considerations related to potential shifts in the commodities market. The Indiana Coal Quality Database was used as the data source. The promising and unpromising indicators derived from the outlook coefficient of samples from the database were used as the REE potential indicator for machine learning classification models. The filter-based approach with bootstrap was used to evaluate the importance of the coal parameters and their prediction uncertainties. Four machine learning methods (linear discriminant analysis (LDA), random forest (RF), support vector machine (SVM), and artificial neural networks (ANN), a data balancing and augmentation approach (Synthetic Minority Over-sampling Technique), and bootstrap resampling techniques were used for building the models and evaluating their prediction capabilities under uncertainty. It was determined that the SVM bootstrap model with ten-times balanced and augmented data provided superior results compared with other models. Finally, stochastic spatial maps of the REE potential within the coal basin were generated using sequential indicator simulation. The spatial maps of the REE potential showed that a 29% area of the Indiana section of the Illinois coal basin has economic potential of REEs, with 90% confidence.

Indiana↗

USGS2024

Mitigating climate change by abating coal mine methane: A critical review of status and opportunities

Methane has a short atmospheric lifetime compared to carbon dioxide (CO 2 ), ∼decade versus ∼centuries, but it has a much higher global warming potential (GWP), highlighting how reducing methane emissions can slow the rate of climate change. When considering the contribution of greenhouse gas (GHG) emissions to current global warming (2010–2019) relative to the industrial revolution (1850–1900) levels, methane contributes 0.5 °C or ∼ a third of the total. The most recent post-2023 global estimates of methane emissions by bottom-up (BU) and top-down (TD) approaches for the coal mining sector are in the range of ∼41 ± 3 Tg yr −1 and 33 ± 5 Tg yr −1 , respectively. This divergence, notwithstanding overlapping confidence intervals, is a result of differences between applied TD global inversion models and BU emission inventories. Further research can help to better refine emissions from the various contributing coal mine methane (CMM) emissions sources. The coal mining sector accounts for over 10 % of global anthropogenic methane emissions. The contribution of CMM emissions to the global budget have increased since 2000, although upward and downward regional trends have been observed.

International Journal of Coal Geology↗

USGS2023

Geologic carbon management options for the North Atlantic-Appalachian Region

Introduction The U.S. Geological Survey (USGS) North Atlantic-Appalachian Region is developing the regionwide capacity to provide timely science support for decision-makers attempting to enhance carbon removal, sequestration, and emissions mitigation to meet national atmospheric carbon reduction goals. The U.S. Environmental Protection Agency (EPA) reported that in 2021, the fourteen States and the District of Columbia in the northeastern region account about for approximately 18 percent of the total national greenhouse gas (GHG) emissions. This Fact Sheet provides a summary of USGS science information and ongoing and new investigations or data-collection programs that may help the northeastern region decrease the release of carbon-containing GHG to the atmosphere.

Connecticut, Delaware, Maine, Maryland, Massachuse↗

USGS2023

Predicting methane emissions and developing reduction strategies for a Central Appalachian Basin, USA, longwall mine through analysis and modeling of geology and degasification system performance

Coal mine methane is a safety concern in active mines due to explosion risk and an environmental concern due to the greenhouse gas (GHG) properties of methane emissions to the atmosphere. Depending on the mine design and operation, structural and stratigraphic characteristics of the geology, and the properties of coal beds affected by mining, a significant amount of methane can be released during coal extraction. These emissions may be low and uniform, but they also can be high and abrupt, if not captured by using pre- and post-mining methods of degasification or not controlled by ventilation during mining. Therefore, emissions should be monitored and predicted accurately for underground safety and GHG reduction. Ventilation and degasification systems should be designed accordingly by taking into account the mine geological properties and the degasification system's performance. This paper presents a comprehensive study to predict emissions and proposes alternatives to reduce emissions in a longwall mine extracting metallurgical coal from the Pocahontas No. 3 coal bed in Virginia (Central Appalachian Basin), USA. The work focused on mining activity in four adjacent panels through analysis and modeling of geology and evaluation of the performance of the methane control system. Results showed that the mine geology contained a significant amount of gas within and around the panel areas, which was controlled by utilizing different degasification methods besides ventilation during mining. The study showed that after pre-mining degasification using fractured vertical wells and in-seam horizontal wells, each panel potentially contained ∼19 MMscf and ∼ 2 MMscf of gas remaining to be handled by the gob gas ventholes (GGVs) and the ventilation, respectively, per acre of mining. It was shown that extending the pre-mining degasification duration of vertical wells by as much as 4 years or drilling more horizontal wells with closer spacing could significantly reduce ventilation and gob emissions during the mining of coal.

Kentucky, Virginia, West Virginia↗

USGS2023

Merging machine learning and geostatistical approaches for spatial modeling of geoenergy resources

Geostatistics is the most commonly used probabilistic approach for modeling earth systems, including quality parameters of various geoenergy resources. In geostatistics, estimates, either on a point or block support, are generated as a spatially-weighted average of surrounding samples. The optimal weights are determined through the stationary variogram model which accounts for the spatial structure of the samples. Recently, efficient modeling workflows using various machine learning algorithms (MLAs) have been expanded to the spatial context for modeling geological heterogeneity. The flexible use of MLAs as a spatial estimation tool stems mainly from the fact that unlike kriging, they do not require any variogram, nor do they depend strongly on a prior stationarity assumption (i.e., second order stationarity). This study evaluates the performance of two MLAs (ensemble super learner and elliptical radial basis neural network), ordinary kriging, and hybrid spatial modeling approaches using ordinary intrinsic collocated cokriging. The aforementioned modeling techniques are compared for estimating resources for four coal variables (wash yield, ash yield, calorific value and thickness) as an example. The results suggest that MLAs, when implemented alone, do not outperform ordinary kriging, but the estimation accuracy of the final model, measured by the root mean squared error tends to subtly improve (

Virginia↗

USGS2023

A residual oil zone (ROZ) assessment methodology with application to the central basin platform (Permian Basin, USA) for enhanced oil recovery (EOR) and long-term geologic CO2 storage

Residual oil zones (ROZ) form due to various geologic conditions and are located below the oil/water contact (OWC) of main pay zones (MPZ). Since ROZs usually contain immobile oil, they have not typically been considered commercially attractive for development by conventional primary recovery methods used in the initial phases of oil production. However, during the last decade some operators of these viable fields that also contain ROZs have extended carbon dioxide enhanced oil recovery (CO 2 -EOR) to below the MPZ to commercially recover oil from the associated ROZ. Increased interest in ROZs is also due to the application of anthropogenic CO 2 for oil recovery, leading to the subsurface sequestration of CO 2 , which can be part of the current net-zero carbon oil and climate change objectives. Several detailed studies of selected formations in the Permian Basin of the United States have shown that ROZs can be as common as traditional conventional oil reservoir traps, suggesting significant resources for potential additional hydrocarbon recovery and subsurface CO 2 sequestration via CO 2 -EOR. However, applications of CO 2 -EOR to ROZs have been limited despite the estimation of significant oil resources considered recoverable through CO 2 -EOR, and the benefit of concurrent geologic CO 2 storage that would help offset carbon emissions from the produced oil. The combination of insufficient economic incentives and technical reasons related to data scarcity, such as lack of penetration of wells and well logs, for locating ROZs has limited development of their resource potential when compared to known fields. This paper presents a probabilistic methodology for identifying and evaluating ROZ resources for CO 2 -EOR and CO 2 sequestration potential with the use of public and proprietary data sources. The methodology was developed during a pilot study that focused on the ROZ in the San Andres Formation of a nine-county area in the Permian Basin in West Texas. The pilot study estimated a mean oil in place of 25 × 10 9 barrels (bbl) of oil and a mean potential incremental oil recovery and CO 2 utilization of 2.6 × 10 9 bbl and 28.2 Tcf (1.46 × 10 9 tons), respectively, with 1 hydrocarbon pore volume (HCPV) of injection using the water alternating gas (WAG) method. The results of this pilot study are consistent with reported volumes in the literature for a similar area in the Permian Basin. The pilot study demonstrated that this methodology could be used to identify and assess the recoverable oil and coincident CO 2 storage volumes of ROZs in other formations and regions.

Texas↗

USGS2023

Assessment of resource potential from mine tailings using geostatistical modeling for compositions: A methodology and application to Katherine Mine site, Arizona, USA

The mining industry, in most cases, targets a specific valuable commodity that is present in small quantities within large volumes of extracted material. After milling and processing, most of the extracted material and the effluents are stored as waste (tailings) in impoundments, such as dams or waste dumps, or are backfilled into underground mines. In time, tailing materials may become an issue of environmental and health concern due to the hazardous elements, ions, and oxides contained within the waste material. In addition, handling and storage of such waste in dams may pose the risk of dam failure with catastrophic consequences to nature and nearby communities. On the other hand, tailings may offer potential as secondary sources of critical elements (CEs), including rare earth elements (REEs), which may have been overlooked during primary production and processing. Therefore, treating mine tailings as a resource has economic and environmental benefits by reducing the waste from new and historical mine sites through remining. One of the critical steps for taking advantage of these benefits is to spatially quantify the resources and the pollutants, which require the application of adequate data analysis and modeling methods, often to compositional geochemical data. Utilizing adequate methods is especially important for correctly quantifying resource potential, as the quantities will often be at low concentrations. This work presents quantification of resource potential (Au, Ag, Cu, Zn, Pb) and elements of environmental concern (Hg and As) from the tailings of a historic mine site, Katherine Mine, AZ, USA. Data reported by the U.S. Bureau of Mines (USBM) after extensive field campaigns in the 1990s, including sampling from tailing impoundment and surrounding areas for geochemical characterization and geophysical surveys, were used. First, compositional data (CoDa) analysis was employed to explore associations of sampling locations, geochemical parts, and the clustering of samples. Next, sequential Gaussian simulation (SGSIM) was applied to samples that showed a genetic link to tailing material after isometric log-ratio transformation (ilr) and mix/max autocorrelation factor (MAF) transformation for spatial modeling and uncertainty evaluation. Geostatistical results revealed spatial variability of concentrations within the tailing area. Uncertainty evaluation based on realizations indicated that Cu (14.27–20.01 t), Zn (44.23–76.23 t), and Pb (22.56–38.28 t) are the most abundant elements within a 5 %–95 % interval, followed by Ag and Au (~5.3 and 0.18 t, at 50th percentile), respectively. Of the elements of health concern, As was found to be ~4.8 t (50th percentile) in the tailing area. The work also showed that ~0.51 t As, 0.005 t Hg, 0.020 t of Au, and 0.62 t of Ag were carried to Lake Mohave by an ephemeral stream called Katherine Wash, which transects the tailings.

Arizona↗

USGS2022

National assessment of carbon dioxide enhanced oil recovery and associated carbon dioxide retention resources — Results

In 2020, the U.S. Geological Survey (USGS) completed a probabilistic assessment of the volume of technically recoverable oil resources available if current carbon dioxide enhanced oil recovery (CO 2 -EOR) technologies were applied to amenable oil reservoirs underlying the onshore and State waters areas of the conterminous United States. The assessment also includes estimates of the mass of CO 2 that could be stored (retained) as a result of CO 2 -EOR activities. The USGS assessment team evaluated more than 3,500 oil reservoirs that were miscible to injected CO 2 . The assessed reservoirs are in 185 previously defined USGS plays in 33 petroleum provinces of 7 national regions. The assessment team estimated that the technically recoverable oil associated with CO 2 -EOR ranges from approximately 25,000 million barrels (MMbbl) at the P 5 percentile to as much as 32,000 MMbbl at the P 95 percentile, with a mean of 29,000 MMbbl. The associated CO 2 retention ranges from approximately 7,400 million metric tons (Mt) at the P 5 percentile to as much as 9,500 Mt at the P 95 percentile, with a mean of 8,400 Mt. The West Texas and Eastern New Mexico region and the Gulf Coast region together contain 60 percent of the mean assessed CO 2 -EOR oil potential and 61 percent of the mean assessed CO 2 retention. Other regions with significant resource potential include the Midcontinent region and Rocky Mountains and Northern Great Plains region.

Continental United States↗

USGS2022

National assessment of carbon dioxide enhanced oil recovery and associated carbon dioxide retention resources — Summary

Introduction In 2020, the U.S. Geological Survey (USGS) completed a probabilistic assessment of the volume of technically recoverable oil resources that might be produced by using current carbon dioxide enhanced oil recovery (CO 2 -EOR) technologies in amenable conventional oil reservoirs underlying the onshore and State waters areas of the conterminous United States. The assessment also includes estimates of the mass of CO 2 that could be stored (retained) in the assessed oil reservoirs following the application of the CO 2 -EOR process. The USGS assessment team evaluated more than 3,500 oil reservoirs that were miscible to injected CO 2 . The assessed reservoirs are in 185 previously defined USGS plays in 33 petroleum provinces of 7 national regions. The team estimated that the total technically recoverable oil resulting from the application of the CO 2 -EOR process ranges from approximately 25,000 million barrels (MMbbl) at the P 5 percentile to as much as 32,000 MMbbl at the P 95 percentile, with a mean of 29,000 MMbbl. The associated CO 2 retention ranges from approximately 7,400 million metric tons (Mt) at the P 5 percentile to as much as 9,500 Mt at the P 95 percentile, with a mean of 8,400 Mt. The results are summarized in this fact sheet and are provided in more detail in the companion data release and circular. The West Texas and Eastern New Mexico region (primarily its Permian Basin) and the Gulf Coast region together contain 60 percent of the mean assessed CO 2 -EOR oil potential and 61 percent of the mean assessed CO 2 retention. Other regions with significant resource potential include the Midcontinent region and the Rocky Mountains and Northern Great Plains region.

Continental United States↗

USGS2022

Machine learning and data augmentation approach for identification of rare earth element potential in Indiana Coals, USA

Rare earth elements and yttrium (REYs) are critical elements and valuable commodities due to their limited availability and high demand in a wide range of applications and especially in high-technology products. The increased demand and geopolitical pressures motivate the search for alternative sources of REYs, and coal, coal waste, and coal ash are considered as new sources for these critical elements. This research evaluates the REY potential of coals from Indiana (USA). However, although coal data revealed REY potential, it suffered from sparse samples with complete REY measurements. Therefore, we explore the applicability of machine learning (ML) models and data augmentation techniques to demonstrate their applicability to evaluate REY potential in Indiana, and other areas in coal basins, using selected coal parameters (Al2O3, Fe2O3, C, Ash, S, P, Mo, Zn, and As contents) as covariates (indicators). Due to the relatively small sample size with complete REY data in the Indiana Coal Database, two data augmentation techniques (Random Over-Sampling Examples and Synthetic Minority Over-Sampling Technique) were used. Four machine learning algorithms (linear discriminate analysis, support vector machine, random forest, and artificial neural networks) were applied for modeling REY potential as a classification problem. The results show that application of Synthetic Minority Over-Sampling Technique prior to development of the support vector machine (SVM) models generated the best REY classification with an accuracy of 95%. The encouraging results based on Indiana coal data may suggest that a similar approach can be used for other coal basins for screening the locations with REY potential. Those locations then can be targeted for more detailed geochemical surveys to identify most promising areas and evaluate overall REY resources.

Indiana↗

USGS2022

Assessment of carbon dioxide enhanced oil recovery and associated carbon dioxide retention resources of the United States

In 2020, the U.S. Geological Survey (USGS) completed a probabilistic assessment of the volume of technically recoverable oil resources that could be produced using current carbon dioxide enhanced oil recovery (CO2-EOR) technologies in amenable conventional oil reservoirs underlying onshore and State-owned offshore waters (herein after, onshore and State waters areas) of the conterminous United States. Our assessment also includes estimates of the mass of CO2 that could be stored (retained) in the assessed oil reservoirs following the application of the CO2-EOR process. The USGS assessment team evaluated more than 3,500 oil reservoirs that were amenable to miscible CO2 injection. The assessed reservoirs are located in 185 plays previously defined by a USGS National Oil and Gas Assessment in 33 petroleum provinces of seven national regions. The team estimated that the total technically recoverable oil resulting from the application of the CO2-EOR process ranges from approximately 25,000 million barrels (MMbbl) at the P5 probability percentile to as much as 32,000 MMbbl at the P95 probability percentile, with a mean of 29,000 MMbbl. The associated CO2 retention ranges from approximately 7,400 million metric tons (Mt) at the P5 percentile to as much as 9,500 Mt at the P95 percentile, with a mean of 8,400 Mt.

conterminous United States↗