Geology Reports⌕ Search

Geology topics

Byron D. Stone

Publications and source records attributed to Byron D. Stone.

At least 37 records · Page 2Linked to original sources
USGS2002

Strategic vision for the U. S. Geological Survey in the Great Lakes-St. Lawrence Region, 2001-2010

The U.S. Geological Survey's (USGS) strategic vision for the Great Lakes-St. Lawrence Region is that of a healthy ecosystem, whose ecological integrity and economic health are nurtured and sustained through sound resource-management decisions based on reliable, timely, and objective scientific information and data. The USGS is a leader in providing reliable, relevant, timely, and objective scientific data and information at local, statewide, regional, national, and international scales to assist in the management and restoration of the natural resources in the Great Lakes-St. Lawrence Region. The mission of the USGS in the Great Lakes-St. Lawrence Region is to provide natural science information to the broad community of policymakers, resource managers, regulators, scientists, and private citizens who contribute to informed decisions concerning natural-resource management practices and ecosystem quality and integrity. The strategic vision for the USGS in the Great Lakes-St. Lawrence Region is a plan to address complex issues that require integrated natural-science information. The strategic vision describes how the USGS will coordinate existing programs and draw upon the strengths of the entire organization. It provides the framework for long-term coordination and integration of USGS Programs and activities over the next decade (2001-10). The strategic vision describes the role of the USGS in the Great Lakes-St. Lawrence Region, the coordination of activities within and outside the Bureau and Department of Interior, and interactions between the USGS and its cooperators, partners, and stakeholders in the Region.

Great Lakes-St. Lawrence region↗
USGS1999

Mapping the glacial geology of the Central Great Lakes region in three dimensions: A model for state-federal cooperation

Planners need to evaluate complex and competing public-policy options for managing water, land, and biological resources; they must ensure economic growth, meet the needs of an increasing population, assess hazards, and manage the environment in a sustainable manner. The State Geological Surveys of Illinois, Indiana, Michigan, and Ohio and the U.S. Geological Survey (USGS) receive many requests from local, State, and Federal planners and officials for geologic information. Thick and complex layers of glacial and related sediments blanket the bedrock of these States: a three-dimensional understanding of these deposits is critical to making informed resource-management and other planning decisions. At two recent forums (in Indianapolis, March 1997, and Columbus, Ohio, February 1999), more than 200 attendees from more than 60 local, State, and Federal agencies provided a clear message. They need three-dimensional geologic information to use in making decisions on the following issues: • Quality, quantity, distribution, and accessibility of surface and ground water • Aggregate sources and land-use conflicts • Energy and mineral resource management • Environmental management and mitigation of land and water contamination • Acceleration of the permitting processes of regulatory agencies • Industrial, commercial, residential, and infrastructure siting and construction • Agricultural land loss, erosion, sedimentation, and agrichemical use • Waste-disposal planning and mitigation • Habitat alteration and biodiversity • Coastal erosion, landslides, radon, floods, and earthquakes

Illinois, Indiana, Michigan, Ohio↗
USGS1998

Preliminary lithostratigraphy, interpreted geophysical logs and hydrogeologic characteristics of the 98th Street core hole, Albuquerque, New Mexico

Core samples, cuttings, and numerous geophysical logs obtained from the 1560 ft (475.5 m) core hole drilled at 98th Street on the west side of Albuquerque provide key stratigraphic and hydraulicproperty information for the upper clastic sediments of the Santa Fe Group, which form the principal aquifer in the region. The core hole and an adjacent water-level monitoring well were drilled cooperatively by the U.S. Geological Survey (USGS) and the City of Albuquerque and investigated in collaboration with the New Mexico Bureau of Mines and Mineral Resources and the New Mexico Office of the State Engineer to improve understanding of aquifer characteristics and controls on ground-water availability and quality. The 751.5 ft (229 m) of core samples recovered from the core hole are the only undisturbed samples of nonlithified sediments of the upper part of the Santa Fe Group that have been collected in this area. These samples have allowed us, for the first time, to directly observe and characterize the lithic and sedimentologic features of this part of the section, and to correlate the detailed geologic features with geophysical-log characteristics, magnetic susceptibility measurements, hydraulic variables, and trace-element geochemistry. The adjacent well was designed to be an areally representative ground-water level and water-quality monitoring well for the Santa Fe Group aquifer. This report chiefly addresses the lithologic, stratigraphic, and hydrogeologic features determined from the 98th Street core hole; other reports address related characteristics. Previous geologic studies predicted the stratigraphy at the site to be, from the land surface downward: 1) Quaternary alluvial and eolian valley-border sediments; 2) fluvial sand and gravel of the upper unit of the Santa Fe Group (Ceja Member of the Santa Fe Formation of Kelly, 1978; equivalent to the Sierra Ledrones Formation of Machette (1978a); 3) downward-fining basin-floor silty clay deposits and 4) fluvial sandy and silty facies of the middle unit of the Santa Fe Group (the Middle Red Member of Bryan and McCann, 1937, and Lambert, 1968). New geologic interpretations indicate that the drill site is in a fault block bounded by east-dipping normal faults and the oblique Atrisco-Rincon fault zone. Core-hole sampling recovered 760.6 ft (231.8 m) of core, in core segments 2.1-2.375 in. (5.3-6 cm) in diameter, and 0.2-10 ft (6.1 cm-3 m) long. The core hole was cased with centered 3-in. PVC casing, and is available for geophysical logging. The monitoring-well hole contains four piezometers at depths of 1544 ft (470.6 m), 1112 ft (338.9 m), 749 ft (228.3 m), and 458 ft (139.6 m). Sediments in the core are loose to weakly cemented gravel, sand, silt, and clay, and lithified sandstone. Laboratory analyses of particle-size distributions of 28 channel samples show that most silty sand samples are uniformly graded and poorly sorted; medium sand samples are moderately sorted. Six principal sediment types are used to describe the core; these sediment types are repeated in various combinations throughout the core and are used to define 22 lithologic units in the cored interval. The six principal sediment types contain sequences of beds having similar modal grain size and sedimentary structure, and are listed in decreasing abundance: 1) Silty fine sand, poorly sorted, containing a coarse silt matrix. Geophysical logs show highly variable baselines with deflections that are related to clay beds and sequences of silt, clay, and sorted fine sand. Density values of 2.12-2.25 g/cc and porosity values of 30-35 percent are typical. 2) Medium sand, moderately to poorly sorted. Geophysical logs show baselines of low variability with deflections that are related to clay beds and sequences of silt, clay, and sorted fine sand. Density values of 2.05-2.20 g/cc and porosity values of 30-35 percent are typical. 3) Clayey sandy silt, poorly sorted, locally microlaminated clay and silt, generally nonplastic. Geophysical logs show highly variable baselines with deflections that are related to sequences of clay and fine sand. Density values of 2.1-2.2 g/cc and porosity values of 30-40 percent are typical. 4) Silt and clay, characteristically red to reddish brown and medium to high plasticity, massive to indistinctly microlaminated. Geophysical logs show variable baselines with broad, high-amplitude compound spikes that are related to sequences of silt and fine sand. Density values of 2.12-2.25 g/cc and porosity values of >45 percent are typical. 5) Sand and gravel, poorly sorted. Geophysical logs show variable baselines with deflections that are related to sequences of silty and sorted fine sand. 6) Sandstone, fine-to-medium grained, poorly sorted, cemented chiefly by calcite, which fills the original pore space. Geophysical logs show density values >2.25 g/cc and porosity values <30 percent. The 22 lithologic units are correlated with recognized basin-floor fluvial lithofacies (Hawley, 1996), which include sand and gravel (lithofacies I), sand with lenses of pebbly sand, silt, and silty clay (lithofacies II), and interbedded sand, silt, and silty clay (modified lithofacies III, IV, IX). The sediments in the core hole are correlated with three informal lithostratigraphic units. The top unit, 0-19 ft (0-5.8 m) depth, consists of Quaternary eolian sand and valley-border alluvium. Coarsegrained deposits in the 19-97 ft (5.8-29.6 m) interval are correlated with the upper unit of the Santa Fe Group. The fine-grained section in the 97-787 ft (29.6-239.9 m) interval is correlated tentatively with the middle unit of the Santa Fe Group. This section contains thick sequences of laminated red and olivebrown clay and silt overbank deposits (441-787 ft) in the distinctive Atrisco member of Connell and others (1998). The Atrisco is correlated with fine-grained zones in numerous wells throughout the central Albuquerque metropolitan area, and is recognized as a zone that separates the upper Santa Fe aquifer from underlying middle Santa Fe deposits. The lower section of the middle unit of the Santa Fe, 787-1500 ft (239.9-457.2 m) depth, includes an upper sequence of moderately sorted channel-fill medium sand, and a lower sequence of sand, silt, and clay overbank deposits. The age of the cored interval is not known precisely. The upper Santa Fe gravel is related regionally to a through-flowing river system that was established in the Rio Grande rift valleys in Early Pliocene time, >4.5 MA. The middle Santa Fe unit is dated tentatively by correlation with a fossiliferous section, in which sandy beds that directly underlie the upper Santa Fe are Late Miocene (Hemphellian), 4.6- 8.9 MA. Further, the middle Santa Fe unit, with dominantly normal magnetic polarity, may have been deposited during closely spaced normal magnetic chrons 5.9-8.3 Ma. Four hydrostratigraphic units summarize the hydrogeologic framework for the 98th Street site: 1) Quaternary valley-border deposits, 2) upper Santa Fe sand and gravel deposits, 3) middle Santa Fe overbank deposits, and 4) middle Santa Fe channel-sand deposits. Empirical values of horizontal hydraulic conductivity estimated from core samples reveal a previously unknown contrast in hydraulic conductivity in the lowest two hydrostratigraphic units. Correlations among numerous wells show that the distinctively fine-grained Atrisco member, with estimated hydraulic conductivities (K) of <0.02-17 ft/day, is a laterally extensive barrier to vertical ground-water flow. The underlying unit that contains moderately sorted medium sand is a potential aquifer production zone that should be investigated further. Laboratory determination of vertical hydraulic conductivity values for fine-grained core samples range from 10 -2 to 10 -7 ft/day; recompacted sandy samples have K values of 1 to 10 -2 ft/day. Results of tests conducted with increasing effective stress show that K values of all samples decrease with decreasing porosity. Comparison of K values from laboratory, empirical, and calculated geophysical values shows discrepancies of 1-3 orders of magnitude (ft/day), indicating that additional analyses of core samples and geophysical data are necessary for future characterization of the Santa Fe Group aquifer.

New Mexico↗
USGS1997

Hydrogeologic framework of western Cape Cod, Massachusetts

The aquifer of western Cape Cod consists of several hydrogeologic units composed of sand, gravel, silt, and clay (fig. 1) that were deposited during the late Wisconsinan glaciation of New England. The aquifer is a shallow, unconfined hydrologic system in which ground-water flows radially outward from the apex of the ground-water mound near the center of the peninsula toward the coast (fig.2). The aquifer is the sole source of water supply for the towns of Bourne, Sandwich, Falmouth, and Mashpee, and the Massachusetts Military Reservation (MMR). Previous geologic studies summarized the characteristics and relative ages of the glacial moraines and meltwater deposits and the relation of these sediments to the extent of the ice-sheet lobes during the last glaciation of southern New England (Oldale and Barlow, 1986; Hartshorn and others, 1991). Hydrogeologic studies in western Cape Cod characterized the shallow regional ground-water-flow system (LeBlanc and others, 1986) and analyzed simulated responses of the aquifer to changes in hydrologic stresses (Guswa and LeBlanc, 1985; Barlow and Hess, 1993; Masterson and Barlow, 1994; and Masterson and others, 1996). Recent concerns about widespread ground-water contamination, especially from sources on the MMR, have resulted in extensive investigations to characterize the local hydrogeology of the aquifer near the MMR (ABB Environmental Services, 1992). Masterson and others (1996) illustrated the strong influence of geology on ground-water flow and the importance of characterizing the hydrogeology to predict the migration of the contaminant plumes beneath the MMR. This report, a product of a cooperative study between the National Guard Bureau and the U.S. Geological Survey (USGS), characterizes the regional hydrogeology of the western Cape Cod aquifer on the basis of surficial glacial geology previously described by Mather and others (1940) and Oldale and Barlow (1986), and presents a new analysis of the subsurface hydrogeology. The characterization of the regional hydrogeologic framework includes a detailed analysis of the glacial sediments, including deltaic and lacustrine deposits and their sedimentary facies; a structure-contour analysis of the transition between the shallow sand and gravel deposits and the underlying fine sand, silt, and clay deposits; and a summary of the relation between lithologic characteristics (grain size and stratigraphy) and empirically determined hydraulic-conductivity values.

Massachusetts↗
USGS1996

Geohydrology and potential water-supply development on Bumkin, Gallops, Georges, Grape, Lovell, and Peddocks Islands, eastern Massachusetts

An investigation of the geohydrology and of the potential for water-supply development on several of the Boston Harbor Islands, eastern Massachusetts, was conducted to evaluate the possibility of developing a permanent small-capacity water supply to support recreational activities, such as camping, hiking, and swimming. The Boston Harbor Islands, including Bumkin, Gallops, Georges, Grape, Lovell, and Peddocks Islands are part of a larger group of glacially deposited drumlins, which are composed of thick, dense, homogeneous till in their core that are overlain by a thin layer of stratified-beach deposits. The surficial materials over-lie a weathered zone of the metasedimentary Cambridge Argillite in the Boston Harbor area and were deposited by continental ice sheets that covered New England twice during the late Pleistocene Epoch, and by near-shore processes in the Holocene Epoch. The thickness of these materials range from less than 1 to about 300 feet where present. The till was deposited by glacial ice and is characterized as an unsorted matrix of sand, silt, and clay with variable amounts of stones and large boulders. The stratified deposits primarily consist of sorted and layered sand and gravel that accumulated and formed the beaches and tombolos of the harbor islands. These deposits overlie the till at altitudes generally less than 10 feet above sea level. A cross-sectional, ground-water-flow model was developed to estimate depth to the water table for a hypothetical drumlin-island flow system, which was assumed to be representative of the drumlin islands in Boston Harbor. Areas were identified in each island flow system with the greatest potential for small-capacity water-supply development based on the model-calculated depth to water and surficial geology of the islands. Model-calculated depth to water estimates were used because of the lack of available hydrologic data for the islands. Model results indicate that the simulated depth to water is less than 20 feet within 240 feet from the shore of the hypothetical drumlin-island flow system. This area on the topographic maps of the six Boston Harbor Islands roughly coincides with the high transmissivity zones of stratified-beach deposits and weathered till on the lower slopes of the drumlins where ground-water discharge and surface and subsurface runoff occurs.

Massachusetts↗
USGS1994

Hydrogeology and water resources of Block Island, Rhode Island

Ground water is present on Block Island as a lens of freshwater that overlies saltwater. Yields of 2 to 5 gallons per minute are obtainable throughout the island, and yields of 25 gallons per minute are possible at many wells. Annual water use during 1990 is estimated to have been 53 million gallons, of which approximately 17 million gallons was delivered from a water company at Sands Pond. Demand by water company customers from May through October averages 74,000 gallons per day. The sustainable yield of Sands Pond during the drought years estimated to be only 45,000 gallons per day. Withdrawal of the remaining 29,000 gallons per day from Fresh Pond, proposed as an alternative source, would produce an estimated water-level decline of less than 1 foot. Block Island consists of a Pleistocene moraine deposit that includes meltwater deposits, till, sediment-flow deposits, and glacially transported blocks of Cretaceous strata and pre-Late Wisconsinan glacial deposits. The water table is a subdued reflection of the land-surface topography and flow is generally from the central, topographic highs toward the coast. Layers of low hydraulic- conductivity material impede vertical flow, creating steep vertical gradients. No evidence of widespread ground-water contamination was found during this study. Nitrate concentrations were below Federal Maximum Contaminant Levels at each of the 83 sites sampled. No evidence of dissolved organic constituents was found in groundwater at the 10 sites sampled, and ground-water samples collected near the landfill showed no evidence of contamination from landfill leachate. Dissolved-iron concentrations exceeded the Federal Secondary Maximum Contaminant Level in groundwater at 26 of 76 wells sampled. High iron concentrations were found predominantly in the eastern and northern parts of the island and are attributed to the presence of iron-bearing minerals and organic matter in the aquifer.

Rhode Island↗