Geology Reports⌕ Search

Geology topics

Bryan D. Downing

Publications and source records attributed to Bryan D. Downing.

At least 19 recordsLinked to original sources

Assessing spatial variability of nutrients, phytoplankton, and related water-quality constituents in the California Sacramento–San Joaquin Delta at the landscape scale—2018 high resolution mapping surveys

Executive Summary This study examined the abundance and distribution of nutrients and phytoplankton in the tidal aquatic environments of the Sacramento–San Joaquin Delta (Delta) and Suisun Bay, comprising three spatial surveys conducted in May, July, and October of 2018 that used continuous underway high frequency sampling and measurements onboard a high-speed boat to characterize spatial variation across the extent of the Delta. The method used involves simultaneously collecting information about the concentration and spatial distribution of all major nutrient forms with analogous information about the major classes of phytoplankton and associated water-quality conditions. The results showed substantial variation across space and time, providing an unprecedented snapshot of the dynamic environmental processes that shape the ways nutrients interact with and affect aquatic habitats in the Delta. The purposes of this study were to improve our understanding of how hydrodynamics, landscape features, and aquatic primary productivity interact to drive nutrient cycling and transport in the Delta and to provide insights into the underlying processes most directly responsible for the conditions at the time of this study, and thus into the range of conditions that may be expected following the wide array of prospective future changes to the Delta. One major anticipated change at the time of this study was the planned upgrade to the Sacramento Regional Wastewater Treatment Plant, but the study also informs our understanding of potential effects from other changes to the Delta, such as those caused by other nutrient-management actions, flow actions, large-scale wetland restoration, drought, flood, levee failure, and changes to water management. Nutrient loading is the primary driver of nutrient concentrations in the Delta, but several other major drivers interact to shape their distribution and effects: geomorphology, hydrodynamics, landscape features, and aquatic productivity. Hydrodynamics affect timescales of transport and dilution of nutrient loads in the Delta. During transit through the system, channel geometry, tidal mixing, and water exports affect hydrodynamics in diverse ways that influence water-residence and transport times, thereby markedly affecting the range of times during which natural internal cycling can alter nutrient concentrations and forms. Channel geometry and location shape tidal energy and river currents into these observed dynamics. Interactions with Delta aquatic landscapes such as herbaceous tidal marsh, submerged aquatic vegetation, and large expanses of intertidal or subtidal sediments (all highly productive landscapes) exert demand on available nutrient supplies but can also simultaneously transform and generate nutrients. Finally, while phytoplankton require nutrients to sustain production and thus are a potential nutrient sink, the amount and form of nutrients also can influence the occurrence of harmful algal blooms (HABs) that adversely affect aquatic organisms as well as affect the occurrence of beneficial algal blooms that result in production of algae that are favorable for imperiled Delta pelagic aquatic food webs. The surveys revealed a complex mosaic of spatial variation, with nutrient concentrations varying from near zero to well above concentrations considered eutrophic; nutrient concentrations were more often related to the extent of hydrologic transport and mixing than to specific geographic locations or to specific landscape features. Similarly, the surveys identified phytoplankton abundance ranging from near detection to the level of large phytoplankton blooms, with large variation in phytoplankton community composition. Although the study occurred during a period of low bloom activity, phytoplankton productivity appeared to be the strongest potential sink for inorganic nutrients in the Delta, indicating that it is a larger control on nutrient concentrations and distribution than previously understood. Cycling and transformation within the water column only appeared to substantially lower total nutrient concentrations at the longest estimated transport timescales. Contrary to expectations, we did not observe substantial nutrient depletion near landscape-scale features such as open-water habitats, submerged aquatic vegetation beds, extensive wetlands, or exposed sediments, indicating that these habitat types did not act as major sinks for nutrients in the Delta during these surveys. These results indicated that nutrient reduction efforts may have the greatest effect on pelagic phytoplankton productivity in the more productive reaches of the Delta and estuary, but these effects are unlikely to be magnified by changes to nutrient loss within the Delta over conceivable changes in flow conditions, Delta water management actions, or large-scale wetland restoration activities. Nevertheless, local processes were shown to cause substantial loss, and thus integrating of nutrient effects with other indicators of aquatic habitat conditions will help inform planning future actions at specific sites. Finally, we note that the primary contribution of this study was intended to be the survey data themselves. Aside from the results highlighted in this report, the surveys are a benchmark against which future environmental change may be evaluated, including changes to nutrient management or water exports, drought, large-scale wetland restoration, and climate change. Further, although we highlight some of the main findings from the surveys in this report, the necessarily limited scope precludes examination of many topics for which these surveys may be highly informative. To facilitate the utility of these data to stakeholders, managers, and researchers, we have released the data online (Bergamaschi and others, 2020) and created an online data exploration portal ( https:​//ca.water​.usgs.gov/​bay-​delta/​2018-​delta-​wide-​mapping-​surveys.html ) where users may query the surveys in a variety of ways to test hypotheses, examine relationships, assess spatial trends, and download data. The data exploration portal is intended to be an immersive experience that allows users to gain greater understanding of the complex interactions that shape Delta aquatic environments. This report is intended as a companion to the portal, allowing the reader to challenge and further explore the highlighted findings. This study was a collaboration between the U.S. Geological Survey and the Delta Regional Monitoring Program, with additional funding provided from U.S. Geological Survey Cooperative Matching Funds Program.

California↗

Physics to fish—Understanding the factors that create and sustain native fish habitat in the San Francisco Estuary

Executive Summary The Bureau of Reclamation (Reclamation) operates the Central Valley Project (CVP), one of the nation’s largest water projects. Reclamation has an ongoing need to improve the scientific basis for adaptive management of the CVP and, by extension, joint operations with California’s State Water Project. The U.S. Geological Survey (USGS) works cooperatively with the Bureau of Reclamation to provide scientific support for the management of Reclamation’s CVP project. Major habitat restoration efforts and a new water-diversion point are planned to benefit delta smelt ( Hypomesus transpacificus ) and other species of concern while ensuring the reliability of water supply. In addition, various flow actions and management activities have been identified as possible methods to increase populations of delta smelt and salmonid ( Oncorhynchus spp.) runs of concern. The overarching goal of this cooperative project was to provide Reclamation with the scientific information needed to evaluate the efficacy of ongoing and future adaptive management actions and to improve the scientific basis for more flexible CVP operations that would achieve water-supply reliability and fish protection. The research and monitoring described in this report comprises the period 2015–19 and focuses on management issues related to native fish species of concern, especially delta smelt. Conserving the delta smelt population while providing a reliable water supply is a primary management and policy issue in California. Our approach for this cooperative project is based on the “physics to fish” concept, the idea that high-quality habitat is generated and sustained by the interaction between physical processes and the landscape. These interactions create a template for chemical and biological processes that can change across a variety of spatial and temporal scales. Following this concept, this project (hereafter referred to as “the physics to fish project”) included monitoring and studies of water flows, sediments, water quality, and invertebrate and fish dynamics across a range of spatial and temporal scales and in regions relevant to resource managers tasked with managing water supplies and ecosystem health in the San Francisco Estuary. The intent of this approach was to document the habitat conditions, important processes, and interactions among them that create high-quality habitat for native fishes so that the likely effects of future management actions (for example, habitat restoration) can be objectively assessed at the local (site-specific), regional (within subregions of the estuary), and landscape (across the entire estuary and beyond) scales. Hydrodynamically, the upper estuary (landward of Carquinez Strait) is characterized by a fixed volume of tidally exchanged water (for example, tidal prism) that interacts with the existing channel network and bathymetry to create regions with differing hydrodynamics. Our results indicate that careful study of construction or reoperation of existing infrastructure to perform management actions can help (1) improve the accuracy of hydrodynamic models; (2) further understanding of ecological effects; and (3) enhance abilities to predict ecological outcomes. At the local scale, we developed a new concept called the Lagrangian to Eulerian (LE) ratio that can be used as a tool for understanding the importance of various hydrodynamic processes in specific channels or channel networks and for forecasting transport dynamics. Channels with LE ratios<1 in a channel network or in a dead-end slough are hydrodynamically able to develop an exchange zone between two parcels of water that may have different chemical and physical properties. In a dead-end channel, there is a landward region with long residence time (no-exchange zone) and a seaward region with short residence time (high-exchange zone) that are well mixed with seaward waters. At the transition (exchange zone) between the high and no-exchange regions, a gradient will form in water-quality constituents that differ in concentration between the landward and seaward waters. Turbidity affects fish habitat and has declined through time in the San Francisco Estuary. Average turbidity across the Sacramento–San Joaquin Delta (hereafter referred to as “the Delta”) is dependent on annual hydrology. In dry years, the region around Cache Slough (known regionally as the “Cache Slough Complex”) in the northern Delta is generally more turbid than Suisun Bay and the lower Sacramento River. When the Yolo By-Pass (known regionally as “Yolo Bypass”), a large flood bypass that runs parallel to the Sacramento River in the northern Delta, is not flooding and river flows are lower, sediment is usually transported into the Cache Slough Complex because flood tides dominate ebb tides, resulting in transport of suspended sediment from seaward areas of the upper estuary into the Cache Slough Complex. These hydrodynamic conditions also favor the formation of turbidity maximums (TMs) in the Cache Slough Complex. The TMs are areas of higher suspended-sediment concentration, providing higher-turbidity habitat favored by some fishes, including delta smelt, and they can also concentrate other constituents, including phytoplankton and organic carbon that can be important in food webs. Pelagic primary production by phytoplankton is the basis for Delta food webs supporting pelagic fishes such as delta smelt; however, phytoplankton abundance in the Delta has declined during recent decades. We examined how nutrients, hydrodynamics, and other factors affect phytoplankton blooms. Based on our results, we developed three new concepts of phytoplankton bloom formation in the Delta, each associated with a distinct set of hydrologic conditions. First, productivity cascades highlighted how local processes can contribute to phytoplankton blooms observed at the regional scale. Second, we observed phytoplankton blooms in the upper San Francisco Estuary that were associated with transport out of Yolo By-Pass (transport blooms). Third, we also documented a series of phytoplankton blooms that were in the confluence area at the landward edge of Suisun Bay. The conditions leading to creation of confluence phytoplankton blooms are not yet understood, but the confluence region connects the Cache Slough Complex with Suisun Marsh. Therefore, blooms in this area have the potential to spread to large areas of the Delta. At the landscape scale, the distribution of the invasive clams ( Potamocorbula amurensis and Corbicula fluminea , hereafter referred to as “ Corbicula ”) is driven by salinity. At smaller spatial scales, the distribution of either species is sensitive to multiple factors affecting survival and reproduction, complicating efforts to predict distribution and abundance without considering local-scale conditions across the area of interest. In the Cache Slough Complex, the area landward of the exchange zone in regions with LE ratio<1 were characterized by low abundances of Corbicula probably because recruits from seaward areas are not transported past the exchange zone and because there are no landward tributaries with adult Corbicula to provide an upstream source of recruits. Corbicula biomass was highest near or downstream from the exchange zone consistent with Corbicula grazing on phytoplankton produced in the exchange zone or transported from the no-exchange zone. The severity of Corbicula grazing could be reduced by manipulating the hydrodynamic characteristics of waterways; however, the beneficial and harmful effects on the organisms meant to benefit from increased phytoplankton production, including zooplankton and fish species of concern, should be thoroughly examined before manipulating hydrodynamic characteristics. The distribution of fishes at the landscape scale is generally driven by the position of the salinity field in the estuary. The physics to fish project compared distributions of fishes at Ryer Island, a tidal wetland in Suisun Bay and a region of variable salinity, with fish distributions at the Cache Slough Complex, a freshwater region. At Ryer Island, there was an absence of freshwater invasive species and an abundance of native species, such as Sacramento splittail ( Pogonichthys macrolepidotus ), tule perch ( Hysterocarpus traskii ), and Sacramento pikeminnow ( Ptychocheilus grandis ). The native species were almost exclusively captured in wetland and nearshore shallow-water habitat regardless of water-quality conditions. In the Cache Slough Complex, our regional scale objective was to elucidate how hydrodynamic-physical habitat interactions drive fish-community structure. Our studies showed that dendritic channel systems were better able to support native species, while intertidal habitats supported those species best able to exploit the transient character of the habitat. Habitats upstream from the exchange zone were especially important in supporting high numbers of native fishes relative to within or downstream from the exchange zone. Many of the native species were associated with tidal marsh in the no-exchange zone. More pelagic-oriented, mobile species, such as Striped Bass ( Morone saxatilis ), threadfin shad ( Dorosoma petenense ), and Sacramento pikeminnow, were more affected by water-quality conditions, such as turbidity. The physics to fish concept developed in this project provides a framework for designing individual projects and for considering the cumulative effects of multiple projects in a region, using the LE ratio as a guiding metric. The physics to fish concept may also provide a suitable framework for coordinating management actions. Tidal wetlands can function in several ways in the hydrodynamic framework. Relatively small tidal wetlands with short channel networks and with LE ratios>1 are not able to maintain a landward no-exchange zone or an exchange zone. This likely means that any contributions to pelagic food webs would be limited to resources derived from wetland vegetation, which can include dissolved and particulate organic matter (detritus) and populations of consumers that can increase in abundance based on those resources. The fate of the contributed production from these channels depends on the characteristics of the receiving waters seaward of the tidal wetland. If these channels join a large system such as Suisun Bay, then any contribution is likely to be rapidly dispersed in the larger volume; however, the channel junction might provide a focal point for consumers, such as fishes, to congregate and feed on material leaving the wetland on ebb tides before it is dispersed in the larger volume. Fishes might also access these resources by entering the wetland. The physics to fish project has established a foundation and several new concepts for understanding how habitat restoration can benefit native fish populations at the local and regional levels. Many of the ideas regarding habitat restoration and channel modifications outlined in this report could help guide management actions that could improve conditions for native fishes at little or no water cost beyond water already dedicated to other management actions. A complete list of products originating from this work is provided in appendix 1.

California↗

A novel boat-based field application of a high-frequency conductometric ammonium analyzer to characterize spatial variation in aquatic ecosystems

Documenting dissolved inorganic nitrogen (DIN) concentration and form at appropriate temporal and spatial scales is key to understanding aquatic ecosystem health, particularly as DIN fuels primary productivity. In addition to point and non-point source nutrient inputs, factors such as hydrology, geomorphology, temperature, light, and biogeochemical transformations influence nutrient dynamics in surface waters, allowing for the formation of steep spatial gradients and patchiness. Documenting nutrient variability is also necessary to identify sources, quantify transformation rates, and understand drivers. Due to logistical and cost constraints, it is often unfeasible to measure concentrations of nutrients in surface waters using discrete sampling followed by laboratory analysis at a resolution high enough to identify steep spatial gradients and patchiness. Because of these constraints, data generated from discrete sampling are limited in space and time, often missing key variabilities. Recent advancements of in situ nitrate plus nitrite (NO3- and NO2-) sensor technology has enabled highly temporally and spatially resolved NO3- concentration measurements in aquatic ecosystems. However, comparable information about ammonium (NH4+) concentrations remains unavailable. To address this need, U.S. Geological Survey collaborated with Timberline Instruments to modify their commercially available benchtop TL-2800 ammonia analyzer to collect high-frequency continuous (1 unique sample measurement per second) NH4+ concentration measurements at a micromolar (0.5 µM) resolution in flow-through mode while receiving water pumped from a moving boat. Although the utility of this method is described for spatial surveys, we anticipate that it would be adaptable to installation at a fixed station for continuous monitoring of NH4+ concentration.

California↗

Field techniques for fluorescence measurements targeting dissolved organic matter, hydrocarbons, and wastewater in environmental waters: Principles and guidelines for instrument selection, operation and maintenance, quality assurance, and data reporting

The use of field deployable fluorescence sensors by the U.S. Geological Survey has become increasingly common for a wide variety of surface water and groundwater investigations. This report addresses field deployable fluorometers that measure the fluorescence response of various substances in water exposed to incident light generated by the sensor. An introduction to the basic principles of field measurements of fluorescence is provided, as well as technical background information on sensors that target dissolved organic matter, wastewater, and hydrocarbons, including sensor selection, operating principles, key features, and design elements. General deployment, operation and maintenance protocols, quality-assurance techniques, and suggestions for data reporting are presented to facilitate and standardize the collection and accurate communication of data collected by the U.S. Geological Survey across studies, sites, and sensor types. Sensor performance issues and common interferences are also described. An appendix is included to describe sensor calibration criteria and procedures, reporting units, and specific approaches to correct for interferences for fluorescence of dissolved organic matter sensors.

Techniques and Methods↗

Technical note—Performance evaluation of the PhytoFind, an in-place phytoplankton classification tool

In 2019, the U.S. Geological Survey evaluated the performance of the Turner Designs, Inc. PhytoFind, an in-place phytoplankton classification tool. The sensor was tested with sample blanks, monoculture and mixed phytoplankton cultures, and turbidity challenges in a laboratory, and was tested on a 120-mile survey of the Caloosahatchee and St. Lucie Rivers in Florida, including Lake Okeechobee. Results include the following: The mixed phytoplankton group fluorescence channel (green excitation sensor) of the PhytoFind can be sensitive to interference. The PhytoFind generally overestimated chlorophyll concentration relative to laboratory-measured chlorophyll a concentrations. Turbidity interference may be less apparent in samples where green algae (chlorophytes) represent a high relative percentage of biovolume. The dissolved organic matter compensation feature was effective in the environmental waters sampled during this evaluation. The correlation between percent chlorophyll contribution per phytoplankton group measured by the PhytoFind and relative percent biovolume per phytoplankton group measured in the laboratory varied and was not explicitly determined to be related to dominant taxa, phytoplankton community composition, or environmental conditions.

Scientific Investigations Report↗

Field techniques for the determination of algal pigment fluorescence in environmental waters—Principles and guidelines for instrument and sensor selection, operation, quality assurance, and data reporting

The use of algal fluorometers by the U.S. Geological Survey (USGS) has become increasingly common. The basic principles of algal fluorescence, instrument calibration, interferences, data quantification, data interpretation, and quality control are given in Hambrook Berkman and Canova (2007). Much of the guidance given for instrument maintenance, data storage, and quality assurance in Wagner and others (2006) are also applicable to algal fluorometers, although they are not explicitly discussed. Algal fluorometers have advanced substantially since these guidance documents were published; so that while the basic principles remain unchanged, new guidance is needed. This techniques and methods report is intended to provide additional information on algal fluorescence-sensor calibration, maintenance, measurement, data storage, and quality assurance that meet stated objectives of USGS data-collection efforts. The operations described facilitate and standardize the collection and accurate communication of algal fluorescence data collected by the USGS across studies, sites, and instrument types. This report provides technical background information on algal fluorescence sensors; including specifications, operating principles, key features, and design elements. Maintenance and calibration protocols, quality-assurance techniques, and suggestions for data reporting are presented. Sensor performance issues, common interferences, and strategies for addressing them are also described.

Techniques and Methods↗

Sources and characteristics of dissolved organic carbon in the McKenzie River, Oregon, related to the formation of disinfection by-products in treated drinking water

Executive Summary This study characterized the concentration and quality of dissolved organic carbon (DOC) in the McKenzie River, a relatively undeveloped watershed in western Oregon, and its link to forming disinfection by-products (DBPs) in treated drinking water. The study aimed to identify the primary source(s) of DOC in source water for the Eugene Water & Electric Board’s (EWEB) conventional treatment plant on the McKenzie River near river mile 11, upstream of Hayden Bridge. The two classes of regulated compounds examined—trihalomethanes (THMs) and haloacetic acids (HAAs)—form when organic carbon in raw source water reacts with chlorine and (or) bromine during water treatment. The objectives of the study were to: characterize the amount and quality of DOC in the McKenzie River and select tributaries during storms; identify the most common types of carbon using UV-vis spectroscopy and other methods; evaluate optical properties for predicting DBP precursors in surface water; and identify land cover classes or vegetation types that may be important sources of organic carbon and DBP precursors in EWEB’s source water. Eleven storms were sampled synoptically in upstream-to-downstream fashion to provide a “snapshot” of water quality conditions at four sites on the McKenzie River from Frissell Bridge (6 miles downstream from Trail Bridge Reservoir) to the EWEB water treatment plant at Hayden Bridge and nine contributing tributaries. Storms included late summer and early autumn “first flush” events and late autumn, winter, and spring storms spanning a range in streamflows from 3,000 to 26,000 cubic feet per second as measured in the main stem McKenzie River at the EWEB water intake. Water samples were analyzed for DOC concentrations and optical properties (fluorescence and ultraviolet absorbance [UVA]) across a range of wavelengths to characterize the quantity and quality of dissolved organic matter (DOM) in the McKenzie River at the drinking water intake and upstream locations. Paired sets of source and finished water samples were collected at the EWEB treatment plant to identify DOC quality parameters in raw source water that might predict DBP concentrations in finished drinking water. DOC concentrations were relatively low in the McKenzie River (0.4–3 milligrams per liter [mg/L]; average 1.5 mg/L) but much higher in the tributaries. The highest DOC concentrations occurred during “first flush” storms in October 2012 and September 2013; the highest value (16 mg/L) was measured at the 52nd Street stormwater outfall. The average DOC concentration in the lower basin-tributaries was 3.8 mg/L; three middle basin tributaries—Quartz, Gate, and Haagen Creeks, which drain private forestland with less coniferous forest compared with other higher elevation tributaries— had slightly lower average DOC concentrations (2.8 mg/L). These middle-basin watersheds may be important sources of DOC and DBP precursors to the McKenzie River, even more so than the lower basin tributaries, depending on their flows (and loads). This is particularly true after the September 2020 Holiday Farm fire, which burned much of this area. DOC concentrations increased 68 percent in the McKenzie River between the uppermost reference site at Frissell Bridge and Vida; this includes drainage from Quartz Creek, Blue River Lake and Cougar Reservoir, which all contributed DOC to the main stem. In contrast, the lowermost tributaries draining most of the agricultural and urban land did not have a large effect on DOC in the McKenzie River despite their higher DOC concentrations because of their presumed relatively low streamflows and, consequently, DOC loads. Apart from the continuous flow monitors in the McKenzie River and some tributaries (Blue River and South Fork McKenzie River, and streamflow at Hayden Bridge and Vida, Camp Creek and some other locations), streamflow was not assessed during sample collection for this study. This lack of streamflow data precludes a detailed analysis of loads, which is discussed in the future studies section. All DBP concentrations in finished drinking water were less than EPA maximum contaminant levels (MCLs) of 0.080 mg/L for the four trihalomethanes (THM4) and 0.060 mg/L for five haloacetic acids (HAA5). During the 11 storm sampling events the maximum summed concentrations were about 0.040 mg/L for both THM4 and HAA5. Compliance monitoring samples, collected separately by EWEB, yielded some higher concentrations—0.046 mg/L THM4 and 0.047 HAA5—during the December 2012 storm. The corresponding benchmark quotient (BQ) values, which indicate how close a measured DBP concentration is to the MCL, were 0.58 and 0.78, respectively, for THM4 and HAA5. Compared with a similar 2007–08 McKenzie River study that did not target storm events, concentrations of THM4 and HAA5 in finished water were 68 percent and 33 percent higher, respectively, during the current study. Due to the high dilution rates in the McKenzie River main stem, many of the individual fluorescence excitation-emission measurements were low (<0.1 Raman units) and approached analytical detection limits. Parallel factor analysis (PARAFAC) resulted in a five-component model (C1–C5) that represents five unique organic fluorophores. Components C1, C2, and C3 represent DOM associated with soil-derived, humic-like, more degraded organic matter. In contrast, components C4 and C5 represent “fresher” DOM, derived from terrestrial and aquatic plants, including algae and cyanobacteria that are common in the McKenzie River and its tributaries and reservoirs. The fluorescence data and PARAFAC modeling suggest that most of the DOC in the McKenzie River originated from terrestrial sources (primarily components C1 and C2). The largest increases in DOC in the main stem occurred in the reach upstream of Vida, from inflows by Quartz Creek, Blue River, South Fork McKenzie River, and other tributaries. Concentrations of DBPs in EWEB’s finished drinking water were positively correlated with DOC concentrations in raw source water (THM4, p <0.05; HAA5, p <0.01) for paired samples collected 12−24 hours apart. DOC concentrations were significantly positively correlated ( p <0.001) with laboratory-based fluorescent dissolved organic matter (fDOM) measurements, suggesting fDOM as a useful parameter for monitoring and predicting DOC concentration in surface water and DBP concentrations in finished water. Of all the PARAFAC components in surface water, C5 had the highest correlations with DBPs in finished water (rho = 0.77–0.84, p <0.01), followed by components C1 and C2 (rho = 0.75 and 0.71, respectively, p <0.01). This C5 carbon is associated with recently produced DOM, possibly from decomposed terrestrial and aquatic vegetation. Model loadings of these three components were considerably higher in the sampled tributaries relative to the main stem McKenzie River, with most of the observed increases in the main stem apparent at Vida. This points to Quartz Creek or other tributaries in the reach between Frissell Bridge and the sampling site near Vida (South Fork McKenzie and Blue Rivers) as potentially key contributors of DOM source material that leads to the production of DBPs in treated drinking water. A limited load analysis showed that the reservoirs contributed 8–37 percent of the instantaneous DOC loads observed at Vida at the time of sampling, which suggests other sources such as Quartz Creek and other streams in the reach between Frissell Bridge and Vida are more important. Random forest analyses identified PARAFAC components C1 and C5 and fluorescence peaks A, C, M, T and N as the best predictors for HAA5 concentrations in finished drinking water, explaining 62.5 percent of the variation. The best predictors for THM4 were C1, C4 + C5, and peaks T, A, and N, which explained 33 percent of the variation. Several land cover and vegetation classes were correlated with DOC concentration and other optical measurements. The percentage of evergreen forest in each of the subwatersheds sampled was negatively correlated ( p <0.001) with DOC concentration and many optical indicators of DOM quantity: UVA 254 , fDOM, and all of the fluorescence peaks. In contrast, mixed (deciduous) forest was positively correlated ( p <0.001) with DOC, fDOM, UVA 254 , and several fluorescence peaks, demonstrating the importance of deciduous leaf fall in generating DOC and DBP precursors. The high level of human activities in the middle and lower portion of the basin—including timber harvesting and road construction on private forestland, agricultural, rural, industrial, and urban development—have resulted in the greatest loss in native coniferous and mixed deciduous forests in the basin. DOC loading from these tributaries and reservoir releases, which contain DOC from terrestrial and aquatic productivity, both enrich the McKenzie River. Concentrations of DOC increased an average of 71 percent (range 30–120 percent) in the McKenzie River between Frissell Bridge, the upstream reference site, and Vida. PARAFAC components C1, C2, and C5—which were correlated with DBPs in finished water—increased, on average, 109–136 percent (range 20–250 percent) in this same Frissell-to-Vida reach. These increases occur from input of tributaries in the middle basin such as Quartz Creek and others, as noted above. Future monitoring, field, and lab studies can improve our understanding of seasonal and spatial sources of organic carbon contributing DBP precursors to the McKenzie River and allow detection of long-term trends resulting from the recent Holiday Farm Fire, which burned 173,393 acres of forestland, including riparian areas along the main stem, and numerous structures, homes, and outbuildings in September 2020. Future studies could examine DOC fluxes and flushing of carbon from the watershed, investigate the role of precipitation amount and intensity in mobilizing carbon and sediment, and evaluate impacts to aquatic communities and human health as part of a post-fire assessment. Other areas ripe for study include evaluating the impacts of potential temperature increases on carbon sequestration and decomposition in the burned and unburned forests and identifying practices that foster sequestration of carbon in forest soils. The use of fluorescence sensors such as fDOM to monitor the concentration and composition of raw water supplies may be improved for detection of specific DBP precursors, to provide continuous and real-time information to treatment plant operators. Future studies that monitor DOM amount and quality, and DBP Formation Potential (FP), particularly during storm events, paired with streamflow measurements, as suggested above, could help identify areas that contribute high DOC loads and thus help managers identify the key areas to focus restoration activities. Other studies could examine treatment options for currently regulated DBPs and potentially unregulated compounds, including advanced biological treatments for their removal. This study was a collaboration between the U.S. Geological Survey (USGS) and EWEB in Eugene, Oregon, with additional funding provided from USGS Cooperative Matching Funds Program.

Oregon↗

Spatial variability of phytoplankton in a shallow tidal freshwater system reveals complex controls on abundance and community structure

Estuaries worldwide are undergoing changes to patterns of aquatic productivity because of human activities that alter flow, impact sediment delivery and thus the light field, and contribute nutrients and contaminants like pesticides and metals. These changes can influence phytoplankton communities, which in turn can alter estuarine food webs. We used multiple approaches-including high-resolution water quality mapping, synoptic sampling, productivity and nitrogen uptake rates, Lagrangian parcel tracking, enclosure experiments and bottle incubations-over a short time period to take a “spatial snapshot” of conditions in the northern region of the San Francisco Estuary (California, USA) to examine how environmental drivers like light availability, nutrients, water residence time, and contaminants affect phytoplankton abundance and community attributes like size distribution, taxonomic structure, and nutrient uptake rates. Zones characterized by longer residence time (15–60 days) had higher chlorophyll-a concentrations (9 ± 4 µg L −1 ) and were comprised primarily of small phytoplankton cells (<5 µm, 74 ± 8%), lower ammonium concentrations (1 ± 0.8 µM), higher nitrate uptake rates, and higher rates of potential carbon productivity. Conversely, zones characterized by shorter residence time (1–14 days) had higher ammonium concentration (13 ± 5 µM) and lower chlorophyll-a concentration (5 ± 1 µg L −1 ) with diatoms making up a larger percent contribution. Longer residence time, however, did not result in the accumulation of large (>5 µm) cells considered important to pelagic food webs. Rather, longer residence time zones had a phytoplankton community comprised primarily of small cells, particularly picocyanobacteria that made up 38 ± 17% of the chlorophyll-a – nearly double the concentration seen in shorter residence time zones (22 ± 7% picocyanobacterial of chlorophyll-a). Our results suggest that water residence time in estuaries may have an effect as large or larger than that experimentally demonstrated for light, contaminants, or nutrients.

California↗

The use of stable isotope-based water age to evaluate a hydrodynamic model

Transport time scales are common metrics of the strength of transport processes. Water age is the time elapsed since water from a specific source has entered a study area. An observational method to estimate water age relies on the progressive concentration of the heavier isotopes of hydrogen and oxygen in water that occurs during evaporation. The isotopic composition is used to derive the fraction of water evaporated, and then translated into a transport time scale by applying assumptions of representative water depth and evaporation rate. Water age can also be estimated by a hydrodynamic model using tracer transport equations. Water age calculated by each approach is compared in the Cache Slough Complex, located in the northern San Francisco Estuary, during summer conditions in which this region receives minimal direct freshwater inflow. The model’s representation of tidal dispersion of Sacramento River water into this backwater region is evaluated. In order to compare directly to isotopic estimates of the fraction of water evaporated (“fractional evaporation”) in addition to age, a hydrodynamic model-based property tracking approach analogous to the water age estimation approach is proposed. The age and fractional evaporation model results are analyzed to evaluate assumptions applied in the field-based age estimates. The generally good correspondence between the water age results from both approaches provides confidence in applying the modeling approach to predict age through broader spatial and temporal scales than are practical to assess using the field method, and discrepancies between the two methods suggest aspects of both approaches that may be improved. Model skill in predicting water age is compared to skill in predicting salinity. Compared to water age, salinity observations are shown to be a less useful diagnostic of transport in this low salinity region in which salt inputs are poorly constrained.

California↗

Procedures for using the Horiba Scientific Aqualog ® fluorometer to measure absorbance and fluorescence from dissolved organic matter

Advances in spectroscopic techniques have led to an increase in the use of optical measurements (absorbance and fluorescence) to assess dissolved organic matter composition and infer sources and processing. Although optical measurements are easy to make, they can be affected by many variables rendering them less comparable, including by inconsistencies in sample collection (for example, filter pore size, preservation), the application of corrections for interferences (for example, inner-filtering corrections), differences in holding times, and instrument drift (for example, lamp intensity). A documented, standardized procedure to address these variables ensures that the optical (absorbance and fluorescence) measurements collected by U.S. Geological Survey researchers are useful and widely comparable. Rigorous and quantifiable quality assurance and quality control are essential for making these data comparable, particularly because there is no published guideline for the measurement of dissolved organic matter absorbance and fluorescence, and especially because there is no National Institute of Standards and Technology standard for dissolved organic matter. Validation and quality-control samples are analyzed on a monthly basis to determine laboratory and instrument precision and daily (that is, each day samples are run) to ensure repeatability. Data are not considered acceptable unless they meet laboratory criteria: All standards should be within 10 percent of the target value, laboratory replicates should be within 5 percent relative percent difference, and laboratory blanks (that is, laboratory reagent-grade water) should be less than one-tenth of the long-term method detection limit. Finally, for data to be useful, they must be accessible to users in a format that can be easily analyzed and interpreted. The Organic Matter Research Laboratory staff has developed a processing routine that extracts a subset of the data, which is made available to the public through the USGS National Water Quality Information System ( http://nwis.waterdata.usgs.gov/usa/nwis/qwdata ), and organizes the full datasets (that is, complete absorbance spectra and fluorescence excitation-emission matrices) in different forms that allow for these data to be analyzed using multi-parameter and multi-way statistical approaches.

Open-File Report↗

Using paired in situ high frequency nitrate measurements to better understand controls on nitrate concentrations and estimate nitrification rates in a wastewater-impacted river

We used paired continuous nitrate ( ) measurements along a tidally affected river receiving wastewater discharge rich in ammonium ( ) to quantify rates of change in concentration ( ) and estimate nitrification rates. sensors were deployed 30 km apart in the Sacramento River, California (USA), with the upstream station located immediately above the regional wastewater treatment plant (WWTP). We used a travel time model to track water transit between the stations and estimated every 15 min (October 2013 to September 2014). Changes in concentration were strongly related to water temperature. In the presence of wastewater, was generally positive, ranging from about 7 µ M d −1 in the summer to near zero in the winter. Numerous periods when the WWTP halted discharge allowed the to be estimated under no-effluent conditions and revealed that in the absence of effluent, net gains in were substantially lower but still positive in the summer and negative (net sink) in the winter. Nitrification rates of effluent-derived NH 4 ( ) were estimated from the difference between measured in the presence versus absence of effluent and ranged from 1.5 to 3.4 µ M d −1 , which is within literature values but tenfold greater than recently reported for this region. was generally lower in winter (∼2 µ M d −1 ) than summer (∼3 µ M d −1 ). This in situ, high frequency approach provides advantages over traditional discrete sampling, incubation, and tracer methods and allows measurements to be made over broad areas for extended periods of time. Incorporating this approach into environmental monitoring programs can facilitate our ability to protect and manage aquatic systems.

California↗

Designing a high-frequency nutrient and biogeochemical monitoring network for the Sacramento–San Joaquin Delta, northern California

Executive Summary This report is the third in a series of three reports that provide information about how high-frequency (HF) nutrient monitoring may be used to assess nutrient inputs and dynamics in the Sacramento–San Joaquin Delta, California (Delta). The purpose of this report is to provide the background, principles, and considerations for designing an HF nutrient-monitoring network for the Delta to address high-priority, nutrient-management questions. The report starts with discussion of the high-priority management questions to be addressed, continues through discussion of the questions and considerations that place demands and constraints on network design, discusses the principles applicable to network design, and concludes with the presentation of three example nutrient-monitoring network designs for the Delta. For three example network designs, we assess how they would address high-priority questions that have been identified by the Delta Regional Monitoring Program (Delta Regional Monitoring Program Technical Advisory Committee, 2015). This report, along with the other two reports of this series (Kraus and others, 2017; Downing and others, 2017), was drafted in cooperation with the Delta Regional Monitoring Program to help scientists, managers, and planners understand how HF data improve our understanding of nutrient sources and sinks, drivers, and effects in the Delta. The first report in the series (Kraus and others, 2017) provides an introduction to the reasons for and fundamental concepts behind using HF monitoring measurements, including a brief summary of nutrient status and trends in the Delta and an extensive literature review showing how and where other research and monitoring programs have used HF monitoring to improve our understanding of nutrient cycling. The report covers the various technologies available for HF nutrient monitoring and presents the different ways HF monitoring instrumentation may be used for both fixed station and spatial assessments. Finally, it presents numerous examples of how HF measurements are currently (2017) being used in the Delta to examine how nutrients and nutrient cycling are related to aquatic habitat conditions. The second report in the series (Downing and others, 2017) summarizes information about HF nutrient and associated biogeochemical monitoring in the north Delta. The report synthesizes data available from the nutrient and water quality monitoring network currently (2017) operated by the U.S. Geological Survey in this ecologically important region of the Delta. In the report, we present and discuss the available data at various timescales—first at the monthly, seasonal, and inter-annual timescales; and, second, for comparison, at the tidal and event timescales. As expected, we determined that there is substantial variability in nitrate concentrations at short timescales, such as within a few hours, but also significant variability at longer timescales such as months or years. This high variability affects calculation of fluxes and loads, indicating that HF monitoring is necessary for understanding and assessing flux-based processes and outcomes in Delta tidal environments.

California↗

Synthesis of data from high-frequency nutrient and associated biogeochemical monitoring for the Sacramento–San Joaquin Delta, northern California

Executive Summary This report is the second in a series of three reports that provide information about high-frequency (HF) nutrient and biogeochemical monitoring in the Sacramento–San Joaquin Delta of northern California (Delta). The purpose of this report is to synthesize the data available from a nutrient and water-quality HF (about every 15 minutes) monitoring network operated by the U.S. Geological Survey in the northern Delta. In this report, we describe the network and focus on the purpose of each station. We then present and discuss the available data, at various timescales—first at the monthly, seasonal, and inter-annual timescales, and second, for comparison, at the tidal and event timescales. As expected, we determined that there is substantial variability in nitrate-N concentrations at short timescales within hours, but also significant variability at longer timescales such as months or years. Resolving this variability is made possible by the HF data, with the largest variability caused by storms, tides, and diel biological processes. Given this large temporal variability, calculations of cumulative nutrient fluxes (for example, daily, monthly, or annual loads) is difficult without HF data. For example, in the Cache Slough, calculation of the annual load without the tidal variability resulted in a 30 percent underestimation of the true annual load value. We conclude that HF measurements are important for accurate determination of fluxes and loads in tidal environments, but, more importantly, provide important insights into processes and rates of nutrient cycling. This report, along with the other two reports of this series (Bergamaschi and others, 2017; Kraus, Bergamaschi, and others, 2017), was drafted in cooperation with the Delta Regional Monitoring Program to help scientists, managers, and planners understand how HF data improve our understanding of nutrient sources and sinks, drivers, and effects in the Delta. The first report in the series (Kraus, Bergamaschi, and others, 2017) provides an introduction to the reasons for and fundamental concepts behind using HF monitoring measurements, including a brief summary of nutrient status and trends in the Delta and an extensive literature review showing how and where other research and monitoring programs have used HF monitoring to improve our understanding of nutrient cycling. The report covers the various technologies available for HF nutrient monitoring and presents the different ways HF monitoring instrumentation may be used for fixed station and spatial assessments. Finally, it presents numerous examples of how HF measurements are currently (2017) being used in the Delta to examine how nutrients and nutrient cycling are related to aquatic habitat conditions. The third report in the series (Bergamaschi and others, 2017) provides the background, principles, and considerations for designing an HF nutrient-monitoring network for the Delta to address high-priority, nutrient-management questions. The report starts with discussion of the high‑priority management questions to be addressed, continues through discussion of the questions and considerations that place demands and constraints on network design, discusses the principles applicable to network design, and concludes with the presentation of three example nutrient-monitoring network designs for the Delta, proposed to address high-priority questions identified by the Delta Regional Monitoring Program (Delta Regional Monitoring Program Technical Advisory Committee, 2015).

California↗

An introduction to high-frequency nutrient and biogeochemical monitoring for the Sacramento–San Joaquin Delta, northern California

Executive Summary This report is the first in a series of three reports that provide information about high-frequency (HF) nutrient and biogeochemical monitoring in the Sacramento–San Joaquin Delta of northern California (Delta). This first report provides an introduction to the reasons for and fundamental concepts behind collecting HF measurements, and describes the benefits associated with a real-time, continuous, HF, multi-parameter water quality monitoring station network that is co-located with flow stations. It then provides examples of how HF nutrient measurements have improved our understating of nutrient sources and cycling in aquatic systems worldwide, followed by specific examples from the Delta. These examples describe the ways in which HF instrumentation may be used for both fixed-station and spatial assessments. The overall intent of this document is to describe how HF measurements currently (2017) are being used in the Delta to examine the relationship between nutrient concentrations, nutrient cycling, and aquatic habitat conditions. The second report in the series (Downing and others, 2017) summarizes information about HF nutrient and associated biogeochemical monitoring in the northern Delta. The report synthesizes data available from the nutrient and water quality monitoring network currently operated by the U.S. Geological Survey in this ecologically important region of the Delta. In the report, we present and discuss the available data at various timescales—first, at the monthly, seasonal, and inter-annual timescales; and, second, for comparison, at the tidal and event (for example, storms, reservoir releases, phytoplankton blooms) timescales. As expected, we determined that there is substantial variability in nitrate concentrations at short timescales within hours, but also significant variability at longer timescales such as months or years. This multi-scale, high variability affects calculation of fluxes and loads, indicating that HF monitoring is necessary for understanding and assessing flux-based processes and outcomes in tidal environments, such as the Delta. The third report in the series (Bergamaschi and others, 2017) provides information about how to design HF nutrient and biogeochemical monitoring for assessment of nutrient inputs and dynamics in the Delta. The report provides background, principles, and considerations for designing an HF nutrient-monitoring network for the Sacramento–San Joaquin Delta to address high-priority, nutrient-management questions. The report starts with high-priority management questions to be addressed, continues with questions and considerations that place demands and constraints on network design, discusses the principles applicable to network design, and concludes with the presentation of three example nutrient‑monitoring network designs for the Delta. For the three example networks, we assess how they would address high-priority questions identified by the Delta Regional Monitoring Program (Delta Regional Monitoring Program Technical Advisory Committee, 2015).

California↗

Clearing the waters: Evaluating the need for site-specific field fluorescence corrections based on turbidity measurements

In situ fluorescent dissolved organic matter (fDOM) measurements have gained increasing popularity as a proxy for dissolved organic carbon (DOC) concentrations in streams. One challenge to accurate fDOM measurements in many streams is light attenuation due to suspended particles. Downing et al. (2012) evaluated the need for corrections to compensate for particle interference on fDOM measurements using a single sediment standard in a laboratory study. The application of those results to a large river improved unfiltered field fDOM accuracy. We tested the same correction equation in a headwater tropical stream and found that it overcompensated fDOM when turbidity exceeded ∼300 formazin nephelometric units (FNU). Therefore, we developed a site-specific, field-based fDOM correction equation through paired in situ fDOM measurements of filtered and unfiltered streamwater. The site-specific correction increased fDOM accuracy up to a turbidity as high as 700 FNU, the maximum observed in this study. The difference in performance between the laboratory-based correction equation of Downing et al. (2012) and our site-specific, field-based correction equation likely arises from differences in particle size distribution between the sediment standard used in the lab (silt) and that observed in our study (fine to medium sand), particularly during high flows. Therefore, a particle interference correction equation based on a single sediment type may not be ideal when field sediment size is significantly different. Given that field fDOM corrections for particle interference under turbid conditions are a critical component in generating accurate DOC estimates, we describe a way to develop site-specific corrections.

Limnology and Oceanography: Methods↗

A river-scale Lagrangian experiment examining controls on phytoplankton dynamics in the presence and absence of treated wastewater effluent high in ammonium

Phytoplankton are critical component of the food web in most large rivers and estuaries, and thus identifying dominant controls on phytoplankton abundance and species composition is important to scientists, managers, and policymakers. Recent studies from a variety of systems indicate that ammonium ( NH + 4 ) in treated wastewater effluent decreases primary production and alters phytoplankton species composition. However, these findings are based mainly on laboratory and enclosure studies, which may not adequately represent natural systems. To test effects of effluent high in ammonium on phytoplankton at the ecosystem scale, we conducted whole-river–scale experiments by halting discharges to the Sacramento River from the regional wastewater treatment plant (WWTP), and used a Lagrangian approach to compare changes in phytoplankton abundance and species composition in the presence (+EFF) and absence (−EFF) of effluent. Over 5 d of downstream travel from 20 km above to 50 km below the WWTP, chlorophyll concentrations declined from 15–25 to ∼2.5 μg L −1 , irrespective of effluent addition. Benthic diatoms were dominant in most samples. We found no significant difference in phytoplankton abundance or species composition between +EFF and −EFF conditions. Moreover, greatest declines in chlorophyll occurred upstream of the WWTP where NH + 4 concentrations were low. Grazing by clams and zooplankton could not account for observed losses, suggesting other factors such as hydrodynamics and light limitation were responsible for phytoplankton declines. These results highlight the advantages of conducting ecosystem-scale, Lagrangian-based experiments to understand the dynamic and complex interplay between physical, chemical, and biological factors that control phytoplankton populations.

California↗

Using continuous underway isotope measurements to map water residence time in hydrodynamically complex tidal environments

Stable isotopes present in water (δ 2 H, δ 18 O) have been used extensively to evaluate hydrological processes on the basis of parameters such as evaporation, precipitation, mixing, and residence time. In estuarine aquatic habitats, residence time (τ) is a major driver of biogeochemical processes, affecting trophic subsidies and conditions in fish-spawning habitats. But τ is highly variable in estuaries, owing to constant changes in river inflows, tides, wind, and water height, all of which combine to affect τ in unpredictable ways. It recently became feasible to measure δ 2 H and δ 18 O continuously, at a high sampling frequency (1 Hz), using diffusion sample introduction into a cavity ring-down spectrometer. To better understand the relationship of τ to biogeochemical processes in a dynamic estuarine system, we continuously measured δ 2 H and δ 18 O, nitrate and water quality parameters, on board a small, high-speed boat (5 to >10 m s –1 ) fitted with a hull-mounted underwater intake. We then calculated τ as is classically done using the isotopic signals of evaporation. The result was high-resolution (∼10 m) maps of residence time, nitrate, and other parameters that showed strong spatial gradients corresponding to geomorphic attributes of the different channels in the area. The mean measured value of τ was 30.5 d, with a range of 0–50 d. We used the measured spatial gradients in both τ and nitrate to calculate whole-ecosystem uptake rates, and the values ranged from 0.006 to 0.039 d –1 . The capability to measure residence time over single tidal cycles in estuaries will be useful for evaluating and further understanding drivers of phytoplankton abundance, resolving differences attributable to mixing and water sources, explicitly calculating biogeochemical rates, and exploring the complex linkages among time-dependent biogeochemical processes in hydrodynamically complex environments such as estuaries.

California↗

Forecasting tidal marsh elevation and habitat change through fusion of Earth observations and a process model

Reducing uncertainty in data inputs at relevant spatial scales can improve tidal marsh forecasting models, and their usefulness in coastal climate change adaptation decisions. The Marsh Equilibrium Model (MEM), a one-dimensional mechanistic elevation model, incorporates feedbacks of organic and inorganic inputs to project elevations under sea-level rise scenarios. We tested the feasibility of deriving two key MEM inputs—average annual suspended sediment concentration (SSC) and aboveground peak biomass—from remote sensing data in order to apply MEM across a broader geographic region. We analyzed the precision and representativeness (spatial distribution) of these remote sensing inputs to improve understanding of our study region, a brackish tidal marsh in San Francisco Bay, and to test the applicable spatial extent for coastal modeling. We compared biomass and SSC models derived from Landsat 8, DigitalGlobe WorldView-2, and hyperspectral airborne imagery. Landsat 8-derived inputs were evaluated in a MEM sensitivity analysis. Biomass models were comparable although peak biomass from Landsat 8 best matched field-measured values. The Portable Remote Imaging Spectrometer SSC model was most accurate, although a Landsat 8 time series provided annual average SSC estimates. Landsat 8-measured peak biomass values were randomly distributed, and annual average SSC (30 mg/L) was well represented in the main channels (IQR: 29–32 mg/L), illustrating the suitability of these inputs across the model domain. Trend response surface analysis identified significant diversion between field and remote sensing-based model runs at 60 yr due to model sensitivity at the marsh edge (80–140 cm NAVD88), although at 100 yr, elevation forecasts differed less than 10 cm across 97% of the marsh surface (150–200 cm NAVD88). Results demonstrate the utility of Landsat 8 for landscape-scale tidal marsh elevation projections due to its comparable performance with the other sensors, temporal frequency, and cost. Integration of remote sensing data with MEM should advance regional projections of marsh vegetation change by better parameterizing MEM inputs spatially. Improving information for coastal modeling will support planning for ecosystem services, including habitat, carbon storage, and flood protection.

California↗