Geology Reports⌕ Search

Geology topics

Barnaby W. Rockwell

Publications and source records attributed to Barnaby W. Rockwell.

At least 19 recordsLinked to original sources
USGS2021

Improved Automated Identification and Mapping of Iron Sulfate Minerals, Other Mineral Groups, and Vegetation using Landsat 8 Operational Land Imager Data, San Juan Mountains, Colorado, and Four Corners Region

Multispectral remote sensing data acquired by the Landsat 8 Operational Land Imager (OLI) sensor were analyzed using a new, automated technique to generate a map of exposed mineral and vegetation groups in the western San Juan Mountains, Colo., and the Four Corners Region of the United States. Band ratio results were combined into displayed mineral and vegetation groups using Boolean algebra. New analysis logic has been implemented to exploit the coastal aerosol band in Landsat 8 OLI data and identify concentrations of iron sulfate minerals. These may indicate the presence of near-surface pyrite, which can be a potential nonpoint source of acid rock drainage. Zoned occurrences of iron sulfate minerals in areas surrounding and down gradient of known sources of pyrite have been mapped using this technique. They show high correlation with occurrences of jarosite-bearing mineral assemblages, as mapped using airborne imaging spectrometer data and supporting field verification surveys. Mapping the occurrence of iron sulfate minerals produced by the weathering and oxidation of pyrite in exposed hydrothermally altered rocks can also provide an important indicator of the genetic environment of alteration and the associated mineral deposit type. The automated analysis methodology is being employed to rapidly and cost-effectively generate maps of large regions of the United States in support of U.S. Geological Survey mineral resource and mineral-environmental assessments. This map, which includes the ERDAS IMAGINE thematic raster format in the data release, has been attributed by pixel value with mineral and vegetation group classification data, which can be queried in most image processing and GIS software packages.

Colorado, Utah↗
USGS2018

Descriptive models for epithermal gold-silver deposits

Epithermal gold-silver deposits are vein, stockwork, disseminated, and replacement deposits that are mined primarily for their gold and silver contents; some deposits also contain substantial resources of lead, zinc, copper, and (or) mercury. These deposits form in the uppermost parts of the crust, at depths less than about 1,500 meters below the water table, and at temperatures below about 300 °C. Most epithermal gold-silver deposits are genetically related to hydrothermal systems associated with subaerial volcanism and intrusion of calc-alkaline magmas along convergent plate margins. These deposits formed throughout most of geologic time, although most known deposits are Cenozoic, which reflects preferential preservation of these shallowly formed deposits in tectonically unstable regions. Epithermal gold-silver deposits range in size from tens of thousands to greater than 1 billion metric tons of ore and have gold contents of 0.1 to greater than 30 grams per metric ton and silver contents of less than 1 to several thousand grams per metric ton. Historically, these deposits have been an important source of gold and silver and are estimated to contain about 8 percent of global gold. The wide range of tonnage-grade characteristics makes epithermal gold-silver deposits an attractive target for small and large exploration and mining companies. This report constitutes a new descriptive model for epithermal gold-silver deposits. It summarizes characteristics of known deposits, including their geological, geophysical, geochemical, and geoenvironmental aspects. Models concerning the genesis of epithermal gold-silver deposits are discussed. The application of descriptive and genetic aspects of the model to mineral exploration and resource assessment of undiscovered deposits is described. Finally, areas where additional research is needed to better understand the genesis of these deposits are identified. An extensive summary table outlining the characteristics of about 100 epithermal gold-silver deposits is included as an appendix; this summary table includes most of the world’s largest epithermal gold-silver deposits, and many smaller, well-studied deposits.

Scientific Investigations Report↗
USGS2017

The Valmy thrust sheet: A regional structure formed during the protracted assembly of the Roberts Mountains allochthon, Nevada, USA

A synthesis of field, biostratigraphic, detrital zircon geochronologic, and remote sensing data across north-central Nevada, United States, defines a thick, regionally extensive sheet of Middle–Upper Ordovician Valmy Formation quartzite that structurally overlies deformed early Paleozoic units of the Roberts Mountains allochthon. Late Paleozoic regional unconformities that record tectonic disruptions have been recognized in the foreland of central and eastern Nevada and locally within the Roberts Mountains allochthon; these identify multiple, regional tectonic events between the Devonian–Mississippian initiation of the Antler orogeny and the Permian–Triassic Sonoma orogeny. However, few studies have documented the regional kinematic history of the Robert Mountains allochthon sensu stricto. In the Independence Mountains of northern Nevada, emplacement of the Roberts Mountains allochthon is restricted to the Mississippian. In the Tuscarora Mountains, the range west and southwest of the Independence Mountains, several deformation events have been identified, and emplacement of the thrust sheet containing the Valmy Formation is restricted to the Late Pennsylvanian–Early Permian. These structural and temporal relations, reflected in the Antler foreland basin adjacent to the Roberts Mountains allochthon and overlap sequences, suggest that the Roberts Mountains allochthon is a composite stratigraphic terrane assembled along the Cordilleran margin during two or more late Paleozoic contractional events. Valmy Formation deposits likely represent the development of coalescing submarine fans below or within bypass channels in a deep slope or rise environment. Petrographic characteristics, biostratigraphy, and detrital zircon U-Pb age populations of the Valmy Formation link it to coeval slope and rise turbidites of the Vinini Formation and shelfal Eureka Quartzite; Valmy Formation detrital zircon age populations are dissimilar to the rift-to-drift facies of the Neoproterozoic–Cambrian Prospect Mountain Quartzite. Throughout north-central Nevada, the Valmy Formation is in fault contact with units of the Roberts Mountains allochthon, including the Devonian–Mississippian Slaven Chert, Silurian–Devonian Elder Sandstone, and Cambrian(?)–Ordovician Vinini Formation, which were deformed prior to, or during, emplacement of the thrust sheet containing Valmy Formation quartzite. Our mapping and data synthesis, guided by regional quartz maps based on remote sensing (Advanced Spaceborne Thermal Emission and Reflection Radiometer [ASTER]) data, delineate similar structural relationships discontinuously for >200 km along strike of the Roberts Mountains allochthon. Exploration for concealed gold deposits within reach of drilling requires knowledge of the relative thicknesses of the Roberts Mountains allochthon and the Valmy Formation. Overall thicknesses of deformed Roberts Mountains allochthon units between the Valmy Formation and underlying carbonate rocks, which host large, world-class Carlin-type gold deposits, vary by hundreds of meters, but are generally less than 700 m in three of the areas studied here. Recognition of windows through and klippen of the Roberts Mountains allochthon is essential for identification of areas where deposits may be at or near the surface. Correspondingly, most ongoing exploration for Carlin-type gold deposits subjacent to the Roberts Mountains allochthon targets concealed deposits. The model proposed in this study is applicable to determining depth to rocks prospective for undiscovered deposits.

Nevada↗
USGS2016

Geology and mineral resources of the North-Central Idaho Sagebrush Focal Area: Chapter C in Mineral resources of the Sagebrush Focal Areas of Idaho, Montana, Nevada, Oregon, Utah, and Wyoming

Summary The U.S. Department of the Interior has proposed to withdraw approximately 10 million acres of Federal lands from mineral entry (subject to valid existing rights) from 12 million acres of lands defined as Sagebrush Focal Areas (SFAs) in Idaho, Montana, Nevada, Oregon, Utah, and Wyoming (for further discussion on the lands involved see Scientific Investigations Report 2016–5089–A). The purpose of the proposed action is to protect the greater sage-grouse ( Centrocercus urophasianus ) and its habitat from potential adverse effects of locatable mineral exploration and mining. The U.S. Geological Survey Sagebrush Mineral-Resource Assessment (SaMiRA) project was initiated in November 2015 and supported by the Bureau of Land Management to (1) assess locatable mineral-resource potential and (2) to describe leasable and salable mineral resources for the seven SFAs and Nevada additions. This chapter summarizes the current status of locatable, leasable, and salable mineral commodities and assesses the potential of locatable minerals in the North-Central Idaho SFA, which extends from east-central to south-central Idaho. The geologically complex area is composed of many different rock units that locally contain potential mineral resources.

Idaho↗
USGS2016

Geology and mineral resources of the North-Central Montana Sagebrush Focal Area: Chapter D in Mineral resources of the Sagebrush Focal Areas of Idaho, Montana, Nevada, Oregon, Utah, and Wyoming

Summary The U.S. Department of the Interior has proposed to withdraw approximately 10 million acres of Federal lands from mineral entry (subject to valid existing rights) from 12 million acres of lands defined as Sagebrush Focal Areas (SFAs) in Idaho, Montana, Nevada, Oregon, Utah, and Wyoming (for further discussion on the lands involved see Scientific Investigations Report 2016–5089–A). The purpose of the proposed action is to protect the greater sage-grouse ( Centrocercus urophasianus ) and its habitat from potential adverse effects of locatable mineral exploration and mining. The U.S. Geological Survey Sagebrush Mineral-Resource Assessment (SaMiRA) project was initiated in November 2015 and supported by the Bureau of Land Management to (1) assess locatable mineral-resource potential and (2) to describe leasable and salable mineral resources for the seven SFAs and Nevada additions. This chapter summarizes the current status of locatable, leasable, and salable mineral commodities and assesses the potential of locatable minerals in the North-Central Montana SFA. The proposed withdrawal area that is evaluated in this report is located in north-central Montana, and includes parts of Fergus, Petroleum, Phillips, and Valley Counties.

Montana↗
USGS2016

Geology and mineral resources of the Southwestern and South-Central Wyoming Sagebrush Focal Area, Wyoming, and the Bear River Watershed Sagebrush Focal Area, Wyoming and Utah: Chapter E in Mineral resources of the Sagebrush Focal Areas of Idaho, Montana, Nevada, Oregon, Utah, and Wyoming

Summary The U.S. Department of the Interior has proposed to withdraw approximately 10 million acres of Federal lands from mineral entry (subject to valid existing rights) from 12 million acres of lands defined as Sagebrush Focal Areas (SFAs) in Idaho, Montana, Nevada, Oregon, Utah, and Wyoming (for further discussion on the lands involved see Scientific Investigations Report 2016–5089–A). The purpose of the proposed action is to protect the greater sage-grouse ( Centrocercus urophasianus ) and its habitat from potential adverse effects of locatable mineral exploration and mining. The U.S. Geological Survey Sagebrush Mineral-Resource Assessment (SaMiRA) project was initiated in November 2015 and supported by the Bureau of Land Management to (1) assess locatable mineral-resource potential and (2) to describe leasable and salable mineral resources for the seven SFAs and Nevada additions. This chapter summarizes the current status of locatable, leasable, and salable mineral commodities and assesses the potential of locatable minerals in the Southwestern and South-Central Wyoming and Bear River Watershed, Wyoming and Utah, SFAs.

Wyoming, Utah↗
USGS2013

A GIS and statistical approach to identify variables that control water quality in hydrothermally altered and mineralized watersheds, Silverton, Colorado, USA

Hydrothermally altered bedrock in the Silverton mining area, southwest Colorado, USA, contains sulfide minerals that weather to produce acidic and metal-rich leachate that is toxic to aquatic life. This study utilized a geographic information system (GIS) and statistical approach to identify watershed-scale geologic variables in the Silverton area that influence water quality. GIS analysis of mineral maps produced using remote sensing datasets including Landsat Thematic Mapper, advanced spaceborne thermal emission and reflection radiometer, and a hybrid airborne visible infrared imaging spectrometer and field-based product enabled areas of alteration to be quantified. Correlations between water quality signatures determined at watershed outlets, and alteration types intersecting both total watershed areas and GIS-buffered areas along streams were tested using linear regression analysis. Despite remote sensing datasets having varying watershed area coverage due to vegetation cover and differing mineral mapping capabilities, each dataset was useful for delineating acid-generating bedrock. Areas of quartz–sericite–pyrite mapped by AVIRIS have the highest correlations with acidic surface water and elevated iron and aluminum concentrations. Alkalinity was only correlated with area of acid neutralizing, propylitically altered bedrock containing calcite and chlorite mapped by AVIRIS. Total watershed area of acid-generating bedrock is more significantly correlated with acidic and metal-rich surface water when compared with acid-generating bedrock intersected by GIS-buffered areas along streams. This methodology could be useful in assessing the possible effects that alteration type area has in either generating or neutralizing acidity in unmined watersheds and in areas where new mining is planned.

Colorado↗
USGS2013

Automated mapping of mineral groups and green vegetation from Landsat Thematic Mapper imagery with an example from the San Juan Mountains, Colorado

Multispectral satellite data acquired by the ASTER (Advanced Spaceborne Thermal Emission and Reflection Radiometer) and Landsat 7 Enhanced Thematic Mapper Plus (TM) sensors are being used to populate an online Geographic Information System (GIS) of the spatial occurrence of mineral groups and green vegetation across the western conterminous United States and Alaska. These geospatial data are supporting U.S. Geological Survey national-scale mineral deposit database development and other mineral resource and geoenvironmental research as a means of characterizing mineral exposures related to mined and unmined hydrothermally altered rocks and mine waste. This report introduces a new methodology for the automated analysis of Landsat TM data that has been applied to more than 180 scenes covering the western United States. A map of mineral groups and green vegetation produced using this new methodology that covers the western San Juan Mountains, Colorado, and the Four Corners Region is presented. The map is provided as a layered GeoPDF and in GIS-ready digital format. TM data analysis results from other well-studied and mineralogically characterized areas with strong hydrothermal alteration and (or) supergene weathering of near-surface sulfide minerals are also shown and compared with results derived from ASTER data analysis.

Colorado↗
USGS2013

Comparative mineral mapping in the Colorado Mineral Belt using AVIRIS and ASTER remote sensing data

This report presents results of interpretation of spectral remote sensing data covering the eastern Colorado Mineral Belt in central Colorado, USA, acquired by the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) and Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) sensors. This study was part of a multidisciplinary mapping and data integration project at the U.S. Geological Survey that focused on long-term resource planning by land-managing entities in Colorado. The map products were designed primarily for the regional mapping and characterization of exposed surface mineralogy, including that related to hydrothermal alteration and supergene weathering of pyritic rocks. Alteration type was modeled from identified minerals based on standard definitions of alteration mineral assemblages. Vegetation was identified using the ASTER data and subdivided based on per-pixel chlorophyll content (depth of 0.68 micrometer absorption band) and dryness (fit and depth of leaf biochemical absorptions in the shortwave infrared spectral region). The vegetation results can be used to estimate the abundance of fire fuels at the time of data acquisition (2002 and 2003). The AVIRIS- and ASTER-derived mineral mapping results can be readily compared using the toggleable layers in the GeoPDF file, and by using the provided GIS-ready raster datasets. The results relating to mineral occurrence and distribution were an important source of data for studies documenting the effects of mining and un-mined, altered rocks on aquatic ecosystems at the watershed level. These studies demonstrated a high correlation between metal concentrations in streams and the presence of hydrothermal alteration and (or) pyritic mine waste as determined by analysis of the map products presented herein. The mineral mapping results were also used to delineate permissive areas for various mineral deposit types.

Colorado↗
USGS2012

Geospatial database for regional environmental assessment of central Colorado.

In conjunction with the future planning needs of the U.S. Department of Agriculture, Forest Service, the U.S. Geological Survey conducted a detailed environmental assessment of the effects of historical mining on Forest Service lands in central Colorado. Stream sediment, macroinvertebrate, and various filtered and unfiltered water quality samples were collected during low-flow over a four-year period from 2004–2007. This report summarizes the sampling strategy, data collection, and analyses performed on these samples. The data are presented in Geographic Information System, Microsoft Excel, and comma-delimited formats. Reports on data interpretation are being prepared separately.

Colorado↗
USGS2012

Mapping argillic and advanced argillic alteration in volcanic rocks, quartzites, and quartz arenites in the western Richfield 1° x 2 ° quadrangle, southwestern Utah, using ASTER satellite data

The Richfield quadrangle in southwestern Utah is known to contain a variety of porphyry Mo, skarn, polymetallic replacement and vein, alunite, and kaolin resources associated with 27-32 Ma calc-alkaline or 12-23 Ma bimodal volcano-plutonic centers in Neoproterozoic to Mesozoic carbonate and siliciclastic rocks. Four scenes of visible to shortwave-infrared image data acquired by the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) sensor were analyzed to generate maps of exposed clay, sulfate, mica, and carbonate minerals, and ASTER thermal infrared data were analyzed to identify quartz and carbonate minerals. Argillic and advanced argillic alteration minerals including alunite, pyrophyllite, dickite, and kaolinite were identified in both undocumented (U) and known (K) areas, including in the southern Paradise Mtns. (U); in calc-alkaline volcanic rocks in the Wah Wah Mtns. between Broken Ridge and the NG area (U/K); at Wah Wah Summit in a small zone adjacent to 33.1 Ma diorite and marble (U); in fractures cutting quartzites surrounding the 20-22 Ma Pine Grove Mo deposit (U); in volcanic rocks in the Shauntie Hills (U/K); in quartzites in the west-central San Francisco Mtns. (U); in volcanic rocks in the Black Mtns. (K); and in mainly 12-13 Ma rhyolitic rocks along a 20 km E-W belt that includes the Bible Spring fault zone west of Broken Ridge, with several small centers in the Escalante Desert to the south (U/K). Argillized Navajo Sandstone with kaolinite and (or) dickite ± alunite was mapped adjacent to calc-alkaline intrusions in the Star Range (U). Intense quartz-sericite alteration (K) with local kaolinite was identified in andesite adjacent to calc-alkaline intrusions in the Beaver Lake Mountains. Mo-bearing phyllic alteration was identified in 22.2 Ma rhyolite plugs at the center of the NG alunite area. Limestones, dolomites, and marbles were differentiated, and quartz and sericite were identified in most unaltered quartzites. Halos of argillically-altered rock ≈12 km in diameter surround the Pine Grove deposit, the central rhyolites at NG, and the North Peaks just south of the Bible Spring fault zone. A southward shift from 22-23 Ma alunite at NG in the northeast to the 12-13 Ma alunite near Broken Ridge in the southwest mirrors a shift in the locus of bimodal magmatism and is similar to the southward shift of activity from the Antelope Range to Alunite Ridge (porphyry Mo potential) in the Marysvale volcanic field farther east. The poster provided in this report compares mineral maps generated from analysis of combined visible-near infrared (VNIR) and shortwave-infrared (SWIR) data and thermal infrared (TIR) ASTER data to a previously published regional geologic map. Such comparisons are used to identify and differentiate rock-forming and hydrothermal alteration-related minerals, which aids in lithologic mapping and alteration characterization over an 11,245 square kilometer area.

Utah↗
USGS2012

Description and validation of an automated methodology for mapping mineralogy, vegetation, and hydrothermal alteration type from ASTER satellite imagery with examples from the San Juan Mountains, Colorado

The efficacy of airborne spectroscopic, or "hyperspectral," remote sensing for geoenvironmental watershed evaluations and deposit-scale mapping of exposed mineral deposits has been demonstrated. However, the acquisition, processing, and analysis of such airborne data at regional and national scales can be time and cost prohibitive. The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) sensor carried by the NASA Earth Observing System Terra satellite was designed for mineral mapping and the acquired data can be efficiently used to generate uniform mineral maps over very large areas. Multispectral remote sensing data acquired by the ASTER sensor were analyzed to identify and map minerals, mineral groups, hydrothermal alteration types, and vegetation groups in the western San Juan Mountains, Colorado, including the Silverton and Lake City calderas. This mapping was performed in support of multidisciplinary studies involving the predictive modeling of surface water geochemistry at watershed and regional scales. Detailed maps of minerals, vegetation groups, and water were produced from an ASTER scene using spectroscopic, expert system-based analysis techniques which have been previously described. New methodologies are presented for the modeling of hydrothermal alteration type based on the Boolean combination of the detailed mineral maps, and for the entirely automated mapping of alteration types, mineral groups, and green vegetation. Results of these methodologies are compared with the more detailed maps and with previously published mineral mapping results derived from analysis of high-resolution spectroscopic data acquired by the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) sensor. Such comparisons are also presented for other mineralized and (or) altered areas including the Goldfield and Cuprite mining districts, Nevada and the central Marysvale volcanic field, Wah Wah Mountains, and San Francisco Mountains, Utah. The automated mineral group mapping products described in this study are ideal for application to mineral resource and mineral-environmental assessments at regional and national scales.

Colorado↗
USGS2012

Integration of new geologic mapping and satellite-derived quartz mapping yields insights into the structure of the Roberts Mountains allochthon applicable to assessments for concealed Carlin-type gold deposits

Geologic mapping and remote sensing across north-central Nevada enable recognition of a thick sheet of Middle and Upper Ordovician Valmy Formation quartzite that structurally overlies folded and faulted Ordovician through Devonian stratigraphic units of the Roberts Mountains allochthon. In the northern Independence Mountains and nearby Double Mountain area, the Valmy Formation is in fault contact with Ordovician through Silurian, predominantly clastic, sedimentary rocks of the Roberts Mountains allochthon that were deformed prior to, or during, emplacement of the Valmy thrust sheet. Similar structural relations are recognized discontinuously for 200 kilometers along the strike of the Roberts Mountains allochthon in mapping guided by regional remote-sensing-based (ASTER) quartz maps. Overall thicknesses of deformed Roberts Mountains allochthon units between the base of the Valmy and the top of underlying carbonate rocks that host large Carlin-type gold deposits varies on the order of hundreds of meters but is not known to exceed 700 meters. The base of the Valmy thrust sheet is a complimentary datum in natural resource exploration and mineral resource assessment for concealed Carlin-type gold deposits.

Nevada↗
USGS2010

Mineral and Vegetation Maps of the Bodie Hills, Sweetwater Mountains, and Wassuk Range, California/Nevada, Generated from ASTER Satellite Data

Multispectral remote sensing data acquired by the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) were analyzed to identify and map minerals, vegetation groups, and volatiles (water and snow) in support of geologic studies of the Bodie Hills, Sweetwater Mountains, and Wassuk Range, California/Nevada. Digital mineral and vegetation mapping results are presented in both portable document format (PDF) and ERDAS Imagine format (.img). The ERDAS-format files are suitable for integration with other geospatial data in Geographic Information Systems (GIS) such as ArcGIS. The ERDAS files showing occurrence of 1) iron-bearing minerals, vegetation, and water, and 2) clay, sulfate, mica, carbonate, Mg-OH, and hydrous quartz minerals have been attributed according to identified material, so that the material detected in a pixel can be queried with the interactive attribute identification tools of GIS and image processing software packages (for example, the Identify Tool of ArcMap and the Inquire Cursor Tool of ERDAS Imagine). All raster data have been orthorectified to the Universal Transverse Mercator (UTM) projection using a projective transform with ground-control points selected from orthorectified Landsat Thematic Mapper data and a digital elevation model from the U.S. Geological Survey (USGS) National Elevation Dataset (1/3 arc second, 10 m resolution). Metadata compliant with Federal Geographic Data Committee (FGDC) standards for all ERDAS-format files have been included, and contain important information regarding geographic coordinate systems, attributes, and cross-references. Documentation regarding spectral analysis methodologies employed to make the maps is included in these cross-references.

Scientific Investigations Map↗
USGS2010

Hydrothermal alteration of the Late Eocene Caetano ash-flow caldera, north-central Nevada: A field and ASTER remote sensing study

Geologic mapping and analysis of ASTER remote sensing data were used to define the effects of a large hydrothermal system in the 12–18 by 22 km Caetano caldera. The caldera formed at ~33.8Ma during eruption of >1100km 3 of the rhyolitic Caetano Tuff that left a 1 km deep basin which was partly filled by a lake. Magma resurgence resulted in shallow(<1 km) emplacement of the Redrock Canyon granite porphyry intrusion into caldera fill in the southwestern part of the caldera. Field and petrographic studies indicate that heat from the pluton or from deeper residual Caetano magma caused a large hydrothermal system to form that altered both the pluton and intracaldera Caetano Tuff throughout the western half of the caldera. ASTER-based mineral mapping shows that the most intense alteration, including local alunite, developed primarily along the southwestern and western caldera margins. Alteration was most intense in the Redrock Canyon intrusion itself and in the upper unit of the Caetano Tuff, which is a sequence of thin ash flows interlayered with finely bedded sedimentary rocks and mesobreccia. Hydrothermally altered intracaldera tuff was domed and crosscut by the unaltered 33.78 ± 0.05 Ma Carico Lake pluton, indicating that caldera formation, magma resurgence, pluton emplacement, and hydrothermal activity all occurred in less than about 100 ka.

Nevada↗
USGS2010

Evaluation of the extent of contamination caused by historical mining in catchments of central Colorado

The U.S. Geological Survey conducted an assessment of stream water and sediment quality in central Colorado, an area of about 54,000 km2. The study area is focused on small tributary catchments in the Rocky Mountains. The Colorado Mineral belt, a northeast-trending mineralized zone that experienced base- and precious-metal mining at the beginning of the late 1800s and early 1900s, cuts diagonally across the geologic trend in the study area. The goal of this study was to compare water and sediment quality in background catchments with those which have been mined. Water and sediment data from 200 catchments, and data from macroinvertebrates from more than 100 catchments, provided ample data for evaluation of the effects of mining on water and sediment quality. Focused sampling was conducted during low-flow conditions in the summers of 2004-2007. Samples were collected from catchments that (1) were underlain largely by a single lithologic unit, (2) contained hydrothermally altered rock and had been prospected, and (3) contained historical mines. Geochemical data determined from catchments that did not contain hydrothermal alteration or historical mines met water-quality criteria and recommended sediment-quality guidelines and showed small variations in base-metal concentrations. Hydrothermal alteration and mineralization typically are associated with igneous rocks that have intruded older bedrock. Base-metal concentrations were elevated in sediment from catchments underlain by hydrothermally altered rock. Catchments affected by historical mining contained highly elevated base-metal concentrations. Classification of catchments on the basis of mineral deposit types proved to be an efficient and accurate method for discriminating catchments that had degraded water and sediment quality. Only about 4.5 percent of the study area has been affected by historical mining, whereas a larger portion of the study area is underlain by hydrothermally altered rock. Weathering of QSP-altered catchments release metals and result in naturally elevated geochemical background concentrations in both sediment and water. The presence of hydrothermal alteration is shown to be a major consideration in the selection of sites for the determination of geochemical background.

Conference Paper↗
USGS2009

Comparison of ASTER- and AVIRIS-derived mineral and vegetation maps of the White Horse replacement alunite deposit and surrounding area, Marysvale volcanic field, Utah

This report presents and compares mineral and vegetation maps of parts of the Marysvale volcanic field in west-central Utah that were published in a recent paper describing the White Horse replacement alunite deposit. Detailed, field-verified maps of the deposit were produced from Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data acquired from a low-altitude Twin Otter turboprop airborne platform. Reconnaissance-level maps of surrounding areas including the central and northern Tushar Mountains, Pahvant Range, and portions of the Sevier Plateau to the east were produced from visible, near-infrared, and shortwave-infrared data acquired by the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) sensor carried aboard the Terra satellite platform. These maps are also compared to a previously published mineral map of the same area generated from AVIRIS data acquired from the high-altitude NASA ER-2 jet platform. All of the maps were generated by similar analysis methods, enabling the direct comparison of the spatial scale and mineral composition of surface geologic features that can be identified using the three types of remote sensing data. The high spatial (2-17 meter) and spectral (224 bands) resolution AVIRIS data can be used to generate detailed mineral and vegetation maps suitable for geologic and geoenvironmental studies of individual deposits, mines, and smelters. The lower spatial (15-30 meter) and spectral (9 bands) resolution ASTER data are better suited to less detailed mineralogical studies of lithology and alteration across entire hydrothermal systems and mining districts, including regional mineral resource and geoenvironmental assessments. The results presented here demonstrate that minerals and mineral mixtures can be directly identified using AVIRIS and ASTER data to elucidate spatial patterns of mineralogic zonation; AVIRIS data can enable the generation of maps with significantly greater detail and accuracy. The vegetation mapping results suggest that ASTER data may provide an efficient alternative to spectroscopic data for studies of burn severity after wildland fires. A new, semiautomated methodology for the analysis of ASTER data is presented that is currently being applied to ASTER data coverage of large areas for regional assessments of mineral-resource potential and mineral-environmental effects. All maps are presented in a variety of digital formats, including jpeg, pdf, and ERDAS Imagine (.img). The Imagine format files are georeferenced and suitable for viewing with other geospatial data in Imagine, ArcGIS, and ENVI. The mineral and vegetation maps are attributed so that the material identified for a pixel can be determined easily in ArcMap by using the Identify tool and in Imagine by using the Inquire Cursor tool.

Utah↗