Geology topics

Alexander N. Gorr

Publications and source records attributed to Alexander N. Gorr.

5 recordsLinked to original sources

USGS2024

Characteristics of debris-flow-prone watersheds and debris-flow-triggering rainstorms following the Tadpole Fire, New Mexico, USA

Moderate- or high-severity fires promote increases in runoff and erosion, leading to a greater likelihood of extreme geomorphic responses, including debris flows. In the first several years following fire, the majority of debris flows initiate when runoff rapidly entrains sediment on steep slopes. From a hazard perspective, it is important to be able to anticipate when and where watershed responses will be dominated by debris flows rather than flood flows. Rainfall intensity averaged over a 15 min duration, I 15 , in particular, has been identified as a key predictor of debris flow likelihood. Developing effective warning systems and predictive models for post-fire debris flow hazards therefore relies on high-temporal resolution rainfall data at the time debris flows initiate. In this study, we documented the geomorphic response of a series of watersheds following a wildfire in western New Mexico, USA, with an emphasis on constraining debris flow timing within rainstorms to better characterize debris-flow-triggering rainfall intensities. We estimated temporal changes in soil hydraulic properties and ground cover in areas burned at different severities over >2 years to offer explanations for observed differences in spatial and temporal patterns in debris flow activity. We observed 16 debris flows, all of which initiated during the first several months following the fire. The average recurrence interval of the debris-flow-triggering I 15 is 1.3 years, which highlights the susceptibility of recently burned watersheds to runoff-generated debris flows in this region. All but one of the debris flows initiated in watersheds burned primarily at moderate or high soil burn severity. Since soil hydraulic properties appeared to be relatively resilient to burning, we attribute reduced debris flow activity at later times to decreases in the fraction of bare ground. Results provide additional constraints on the rainfall characteristics that promote post-fire debris flow initiation in a region where fire size and severity have been increasing.

New Mexico↗

USGS2023

The influence of large woody debris on post-wildfire debris flow sediment storage

Debris flows transport large quantities of water and granular material, such as sediment and wood, and this mixture can have devastating impacts on life and infrastructure. The proportion of large woody debris (LWD) incorporated into debris flows can be enhanced in forested areas recently burned by wildfire, because wood recruitment into channels accelerates in burned forests. In this study, we explored how LWD transported in post-wildfire debris flows acts to retain sediment within small headwater channels. We found that the largest amount of debris flow sediment is stored in channel reaches with a ratio of LWD length to channel width between 0.25 and 1. Moreover, the largest debris flow deposits forced by LWD were found in low-angle channel reaches. We examined two models for debris flow volume estimation: (1) the current volume prediction model used in U.S. Geological Survey debris flow hazard assessments, and (2) a regional model developed to predict the sediment yield associated with debris-laden flows. We found that the regional model better matched the magnitude of the observed sediment at the terminal fan, suggesting the utility of regionally calibrated parameters for debris flow volume prediction. However, large wood created sediment storage upstream of the terminal fan, and this volume was of the same magnitude as the total volume at the terminal fans. Finally, we demonstrate a method for estimating debris flow velocity based on estimates of the critical velocity required to break wood, which can be used in future field studies to estimate minimum debris flow velocity values.

New Mexico↗

USGS2023

Triggering conditions, runout, and downstream impacts of debris flows following the 2021 Flag Fire, Arizona, USA

Debris flows pose a serious threat to communities in mountainous areas, particularly in the years following wildfire. These events have been widely studied in regions where post-wildfire debris flows have been historically frequent, such as southern California. However, the threat of post-wildfire debris flows is increasing in many regions where detailed data on debris-flow physical properties, volume, and runout potential are sparse, such as the Southwest United States (US) (Arizona and New Mexico). As the Southwest becomes more vulnerable to these hazards, there is an increasing need to better characterize the properties of post-wildfire debris flows in this region and to identify similarities and differences with nearby areas, particularly southern California, where there is a greater abundance of data. In this paper, we study the characteristics and downstream impacts of two post-wildfire debris flows that initiated following the 2021 Flag Fire in northern Arizona, US. We gathered data regarding soil hydraulic properties, rainfall characteristics, watershed response, and debris-flow initiation, runout, volume, grain size, and downstream impacts during the first two monsoon seasons following the containment of the Flag Fire. We also applied established debris-flow runout and volume models that were developed in southern California to our study watershed and compared the output with observations. In the first monsoon season following the fire, there were two post-wildfire debris flows, one of which resulted in damage to downstream infrastructure, and one major flood event. We found that, while more intense rainfall was observed to generate debris flows at our study site compared to southern California, burned watersheds in northern Arizona are still susceptible to debris flows during storms with low recurrence intervals in the first year following fire. During the second monsoon season, there were no major runoff events, despite more intense storms. This indicates that the temporal window for heightened debris-flow susceptibility at our study area was less than one year, due to the recovery of soil hydraulic properties and vegetation regrowth. We also found that the debris-flow properties at our study site, such as volume, mobility, and grain size distribution, may differ from those in other regions in the western US, including southern California, potentially due to regional differences in rainfall characteristics and sediment supply. Differences in rainfall characteristics and sediment supply may have also influenced the performance of the debris-flow runout and volume models, which overpredicted the observed runout distance by 400 m and predicted a volume more than 17 times greater than what was observed.

Arizona↗

USGS2023

Guidance for parameterizing post-fire hydrologic models with in situ infiltration measurements

Wildfire can alter soil-hydraulic properties, often resulting in an increased prevalence of infiltration-excess overland flow and greater potential for debris-flow hazards. Mini disk tension infiltrometers (MDIs) can be used to estimate soil hydraulic properties, such as field-saturated hydraulic conductivity ( K fs ) and wetting front potential ( H f ), and their spatial variability following wildfire. However, the small (point-scale) footprint of MDI measurements makes it challenging to use these data to parameterize hydrologic models at the hillslope and watershed scales where hydrologic hazards, such as debris flows, initiate. Here, we designed numerical experiments to estimate spatially constant or watershed-scale effective hydrologic parameters (EHPs) that approximate the response of spatially variable hydrologic parameters with distributions derived from MDI measurements at five sites in the southwestern United States. We found that it is possible to define EHPs for both K fs and H f based on the MDI measurements that lead to reasonable approximations of run-off hydrographs at the outlets of small watersheds (<1 km 2 ). We found that watershed EHPs are functions of rainfall characteristics, although they are most sensitive to rainfall intensity and relatively less sensitive to the temporal distribution of rainfall. EHPs are lower than the arithmetic mean of the MDI measurements and are better approximated by the median or geometric mean of the MDI measurements, particularly for storms with recurrence intervals of approximately 1 year or less that commonly initiate post-fire debris flows. This work demonstrated that using the proposed upscaling method to estimate watershed-scale EHPs, as opposed to approximating EHPs based on the arithmetic mean of the MDI measurements, improved the ability of a hydrologic model to identify storms that are likely to produce debris flows. Results improved our ability to link point-scale MDI measurements and watershed-scale EHPs in post-fire settings and helped guide our ability to use MDI data to parameterize post-fire hydrologic models.

Arizona, New Mexico↗

USGS2022

A progressive flow-routing model for rapid assessment of debris-flow inundation

Debris flows pose a significant hazard to communities in mountainous areas, and there is a continued need for methods to delineate hazard zones associated with debris-flow inundation. In certain situations, such as scenarios following wildfire, where there could be an abrupt increase in the likelihood and size of debris flows that necessitates a rapid hazard assessment, the computational demands of inundation models play a role in their utility. The inability to efficiently determine the downstream effects of anticipated debris-flow events remains a critical gap in our ability to understand, mitigate, and assess debris-flow hazards. To better understand the downstream effects of debris flows, we introduce a computationally efficient, reduced-complexity inundation model, which we refer to as the Progressive Debris-Flow routing and inundation model (ProDF). We calibrate ProDF against mapped inundation from five watersheds near Montecito, CA, that produced debris flows shortly after the 2017 Thomas Fire. ProDF reproduced 70% of mapped deposits across a 40 km 2 study area. While this study focuses on a series of post-wildfire debris flows, ProDF is not limited to simulating debris-flow inundation following wildfire and could be applied to any scenario where it is possible to estimate a debris-flow volume. However, given its ability to reproduce mapped debris-flow deposits downstream of the 2017 Thomas Fire burn scar, and the modest run time associated with a simulation over this 40 km 2 study area, results suggest ProDF may be particularly promising for post-wildfire hazard assessment applications.

Landslides↗