Geology Reports⌕ Search

Geology topics

Alex L. Sessions

Publications and source records attributed to Alex L. Sessions.

6 recordsLinked to original sources
USGS2025

Planning considerations related to contamination control for the return and analysis of Martian samples

The joint National Aeronautics and Space Administration and European Space Agency Mars Sample Return (MSR) Campaign is a proposed multi-mission effort to bring selected geological samples from Mars to Earth for the purpose of scientific investigation. Significant parts of these investigations could be affected by Earth-sourced contamination that is either misinterpreted as having a martian origin or that masks a martian signal. The Mars 2020 Perseverance rover implemented strict contamination control requirements to limit contamination of the samples during sample collection. Contamination control and contamination knowledge requirements have not yet been established for the samples after they arrive on Earth. The MSR Sample Receiving Facility (SRF) Contamination Panel (SCP) was tasked with defining the terrestrial biological, organic, and inorganic contamination limits for martian samples during their residence inside the SRF. To reach our recommendations, the SCP studied (i) the previously proposed limits and rationale of the Organic Contamination Panel, (ii) cleanliness levels achieved for sampling hardware by the M2020 mission, (iii) recent improvements in analytical technology and detection limits, (iv) updated information regarding the organic content of martian samples ( e.g. , from the Sample Analysis at Mars instrument on the Curiosity rover and laboratory analyses of martian meteorites), and (v) information about the composition and geologic context of samples being collected by the Perseverance rover for return to Earth.

Astrobiology↗
USGS2020

Position-specific distribution of hydrogen isotopes in natural propane: Effects of thermal cracking, equilibration and biodegradation

Intramolecular isotope distributions, including isotope clumping and position specific fractionation, can provide proxies for the formation temperature and formation and destruction pathways of molecules. In this study, we explore the position-specific hydrogen isotope distribution in propane. We analyzed propane samples from 10 different petroleum systems with high-resolution molecular mass spectrometry. Our results show that the hydrogen isotope fractionation between central and terminal positions of natural propanes ranges from −102‰ to +205‰, a much larger range than that expected for thermodynamic equilibrium at their source and reservoir temperatures (36–63‰). Based on these findings, we propose that the hydrogen isotope structure of catagenic propane is largely controlled by irreversible processes, expressing kinetic isotope effects (KIEs). Kinetic control on hydrogen isotope composition of the products of thermal cracking is supported by a hydrous pyrolysis experiment using the Woodford Shale as substrate, in which we observed isotopic disequilibrium in the early stage of pyrolysis. We make a more general prediction of KIE signatures associated with kerogen cracking by simulating this chemistry in a kinetic Monte Carlo model for different types of kerogens. In contrast, unconventional shale fluids or hot conventional reservoirs contain propane with an isotopic structure close to equilibrium, presumably reflecting internal and/or heterogeneous exchange during high temperature storage (ca. 100–150 °C). In relatively cold (<100 °C) conventional gas accumulations, propane can discharge from its source to a colder reservoir, rapidly enough to preserve disequilibrium signatures even if the source rock thermal maturity is high. These findings imply that long times at elevated temperatures are required to equilibrate the hydrogen isotopic structure of propane in natural gas host rocks and reservoirs. We further defined the kinetics of propane equilibration through hydrogen isotope exchange experiments under hydrous conditions; these experiments show that hydrogen in propane is exchangeable over laboratory timescales when exposed to clay minerals such as kaolinite. This implies rather rapid transfer of propane from sources to cold reservoirs in some of the conventional petroleum systems. Propane is also susceptible to microbial degradation in both oxic and anoxic environments. Biodegradation of propane in the Hadrian and Diana Hoover oil fields (Gulf of Mexico) results in strong increases in central-terminal hydrogen isotope fractionation. This reflects preferential attack on the central position, consistent with previous studies.

Geochimica et Cosmochimica Acta↗
USGS2018

Position-specific 13C distributions within propane from experiments and natural gas samples

Site-specific carbon isotope measurements of organic compounds potentially recover information that is lost in a conventional, ‘bulk’ isotopic analysis. Such measurements are useful because isotopically fractionating processes may have distinct effects at different molecular sites, and thermodynamically equilibrated populations of molecules tend to concentrate heavy isotopes in one molecular site versus another. Most recent studies of site-specific 13 C in organics use specialized Nuclear Magnetic Resonance (NMR) techniques or complex chemical degradations prior to mass spectrometric measurements. Herein we present the first application of a new mass spectrometric technique that reconstructs the site-specific carbon isotope composition of propane based on measurements of the 13 C/ 12 C ratios of two or more fragment ions that sample different proportions of the terminal and central carbon sites. We apply this method to propane from laboratory experiments and natural gas samples to explore the relationships between site-specific carbon isotope composition, full-molecular δ 13 C, thermal maturity, and variation in organic matter precursors. Our goal is to advance the understanding of the sources and histories of short-chain alkanes within geologic systems. Our findings suggest that propane varies in its site-specific carbon isotope structure, which is correlated with increasing thermal maturity, first increasing in terminal position δ 13 C and then increasing in both center and terminal position δ 13 C. This pattern is observed in both experimental and natural samples, and is plausibly explained by a combination of site-specific, temperature-dependent isotope effects associated with conversion of different precursor molecules (kerogen, bitumen, and/or oil) to propane, differences in site-specific isotopic contents of those precursors, and possibly distillation of reactive components of those precursors with increasing maturity. We hypothesize that the largest changes in site-specific isotopic content of propane occur when bitumen and/or oil replace kerogen as the dominant precursors. If correct, this phenomenon could have significant utility for understanding gas generation in thermogenic petroleum systems.

Geochimica et Cosmochimica Acta↗
USGS2016

New organic reference materials for hydrogen, carbon, and nitrogen stable isotope-ratio measurements: caffeines, n-alkanes, fatty acid methyl esters, glycines, L-valines, polyethylenes, and oils

An international project developed, quality-tested, and determined isotope−δ values of 19 new organic reference materials (RMs) for hydrogen, carbon, and nitrogen stable isotope-ratio measurements, in addition to analyzing pre-existing RMs NBS 22 (oil), IAEA-CH-7 (polyethylene foil), and IAEA-600 (caffeine). These new RMs enable users to normalize measurements of samples to isotope−δ scales. The RMs span a range of δ 2 H VSMOW-SLAP values from −210.8 to +397.0 mUr or ‰, for δ 13 C VPDB-LSVEC from −40.81 to +0.49 mUr and for δ 15 N Air from −5.21 to +61.53 mUr. Many of the new RMs are amenable to gas and liquid chromatography. The RMs include triads of isotopically contrasting caffeines, C 16 n -alkanes, n -C 20 -fatty acid methyl esters (FAMEs), glycines, and l -valines, together with polyethylene powder and string, one n -C 17 -FAME, a vacuum oil (NBS 22a) to replace NBS 22 oil, and a 2 H-enriched vacuum oil. A total of 11 laboratories from 7 countries used multiple analytical approaches and instrumentation for 2-point isotopic normalization against international primary measurement standards. The use of reference waters in silver tubes allowed direct normalization of δ 2 H values of organic materials against isotopic reference waters following the principle of identical treatment. Bayesian statistical analysis yielded the mean values reported here. New RMs are numbered from USGS61 through USGS78, in addition to NBS 22a. Because of exchangeable hydrogen, amino acid RMs currently are recommended only for carbon- and nitrogen-isotope measurements. Some amino acids contain 13 C and carbon-bound organic 2 H-enrichments at different molecular sites to provide RMs for potential site-specific isotopic analysis in future studies.

Analytical Chemistry↗
USGS2016

Study of thermochemical sulfate reduction mechanism using compound specific sulfur isotope analysis

The sulfur isotopic fractionation associated with the formation of organic sulfur compounds (OSCs) during thermochemical sulfate reduction (TSR) was studied using gold-tube pyrolysis experiments to simulate TSR. The reactants used included n -hexadecane ( n -C 16 ) as a model organic compound with sulfate, sulfite, or elemental sulfur as the sulfur source. At the end of each experiment, the S-isotopic composition and concentration of remaining sulfate, H 2 S, benzothiophene, dibenzothiophene, and 2-phenylthiophene (PT) were measured. The observed S-isotopic fractionations between sulfate and BT, DBT, and H 2 S in experimental simulations of TSR correlate well with a multi-stage model of the overall TSR process. Large kinetic isotope fractionations occur during the first, uncatalyzed stage of TSR, 12.4&permil; for H 2 S and as much as 22.2&permil; for BT. The fractionations decrease as the H 2 S concentration increases and the reaction enters the second, catalyzed stage. Once all of the oxidizable hydrocarbons have been consumed, sulfate reduction ceases and equilibrium partitioning then dictates the fractionation between H 2 S and sulfate (&sim;17&permil;). Experiments involving sparingly soluble CaSO 4 show that during the second catalytic phase of TSR the rate of sulfate reduction exceeds that of sulfate dissolution. In this case, there is no apparent isotopic fractionation between source sulfate and generated H 2 S, as all of the available sulfate is effectively reduced at all reaction times. When CaSO 4 is replaced with fully soluble Na 2 SO 4 , sulfate dissolution is no longer rate limiting and significant S-isotopic fractionation is observed. This supports the notion that CaSO 4 dissolution can lead to the apparent lack of fractionation between H 2 S and sulfate produced by TSR in nature. The S-isotopic composition of individual OSCs record information related to geochemical reactions that cannot be discerned from the &delta; 34 S values obtained from bulk phases such as H 2 S, oil, and sulfate minerals, and provide important mechanistic details about the overall TSR process.

Geochimica et Cosmochimica Acta↗