Geology topics

Alan Koenig

Publications and source records attributed to Alan Koenig.

6 recordsLinked to original sources

USGS2019

Geochemistry of hematite veins in IOA-IOCG deposits of SE Missouri, USA: Relation to felsic magmatism and caldera lakes

The paragenesis, textures, and chemical compositions of secondary hematite in regional potassic altered rhyolites, four IOA deposits, the sedimentary iron deposit at Pilot Knob and the Boss IOCG deposit in SE Missouri were determined and compared to primary magnetite from the IOA and IOCG deposits. Magnetite is composed of elements characteristics of mafic to intermediate intrusions whereas hematite is enriched in elements characteristic of felsic igneous rocks. These results suggest that magnetite formed from fluids discharged from mafic to intermediate composition intrusions. Hematite precipitated from fluids discharged from felsic intrusions or fluids that evolved in caldera lakes. Hematite in the sedimentary iron deposit at Pilot Knob formed in an evaporative caldera lake with fluid inputs from felsic intrusions.

Missouri↗

USGS2019

Absence of magnetite microlites, geochemistry of magnetite veins and replacements in IOA deposits, SE Missouri, USA: Relations to intermediate intrusions

The paragenesis, textures, and chemical compositions of magnetite in two mafic to intermediate intrusions and four IOA deposits in SE Missouri were studied to discriminate between igneous and hydrothermal sources. In this study, we found that replacement magnetite with mineral inclusion-rich cores yields erroneously high Ti, Al, Si, Mg, and Mn contents as determined by EMP and LA-ICP-MS due to rutile and silicate inclusions. Thus, identification of high-Ti microlites on the basis of inclusion-rich cores with high Ti contents is an analytical artefact. Since the high-Ti magnetite microlite flotation model is critically dependent on this type of analysis, it may be invalid. The presence of coarse-grained high-Ti vein magnetite with ilmenite lamellae enveloped by replacement magnetite with inclusion-rich cores in ore zones suggests that the veins were high-temperature conduits for low-temperature replacement ores. The trace element compositions of vein and replacement magnetite suggest that iron was sourced from mafic to intermediate intrusions. These results support a magmatic-hydrothermal origin for IOA systems in SE Missouri.

Missouri↗

USGS2018

Magmatic origin for sediment-hosted Au deposits, Guizhou Province, China: In situ chemistry and sulfur isotope composition of pyrites, Shuiyindong and Jinfeng deposits

The southwest Guizhou Province, China, contains numerous sediment-hosted Au deposits with Au reserves greater than 700 tonnes. To date, the source of ore fluids that formed the Guizhou sediment-hosted Au deposits is controversial, hampering the formulation of genetic models. In this study, we selected the Shuiyindong and Jinfeng Au deposits, the largest strata-bound and fault-controlled deposits in Guizhou, respectively, for detailed research on pyrite chemistry and S isotope composition using laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) and laser ablation-multicollector-inductively coupled plasma-mass spectrometry (LA-MC-ICP-MS), respectively. Petrography and pyrite chemistry studies distinguished five generations of pyrite. Among these, pre-ore pyrite 2 and ore pyrite are the most abundant types in the deposits. Pre-ore pyrite 2 is anhedral to euhedral and with ~2,639 ppm As and wider ranges of Cu, Sb, and Pb (<~22–4,837 ppm, <~6 to 532 ppm, and <~4 to 1,344 ppm, respectively). Gold in pre-ore pyrite 2 is below the detection limit of LA-ICP-MS (~2 ppm). Pre-ore pyrite 2 is interpreted to have a sedimentary (syngenetic or diagenetic) origin. Ore pyrite commonly rims the four identified pre-ore pyrites or occurs as individual, anhedral to euhedral crystals. Ore pyrite is enriched in Au (~641 ppm), As (~9,147 ppm), Cu (~1,043 ppm), Sb (~188 ppm), Hg (~43 ppm), and Tl (~22 ppm) in both deposits. Ore pyrite formed mainly by sulfidation of Fe in Fe-bearing host rocks, mainly Fe dolomite, and As, Cu, Sb, Hg, and Tl, also in ore fluids, were incorporated into ore pyrite. In situ δ 34 S isotope ratios for pre-ore pyrite 2 and ore pyrite were measured by LA-MC-ICP-MS. Pre-ore pyrite 2 from Shuiyindong and Jinfeng deposits resulted in δ 34 S values ranging from −0.8 to +3.4‰ and from 5.1 to 10.5‰, respectively. Analyses of ore pyrite from the Shuiyindong have δ 34 S values that vary from −3.3 to +2.5‰, with a median of 0.7‰; analyses of ore pyrite from the Jinfeng range from 8.9 to 11.2‰, with a median at 10.3‰. Available bulk and in situ δ 34 S data in the literature for pre-ore pyrites 1 and 2 and ore-related sulfide minerals including ore pyrite, arsenopyrite, and late ore-stage stibnite, realgar, orpiment, and cinnabar from several Guizhou sediment-hosted Au deposits were compiled for comparison. Pre-ore-stage pyrites from Guizhou sediment-hosted Au deposits have a broad range of δ 34 S values, from −33.8 to + 17.9‰ (including in situ and available bulk δ 34 S data). Ore-related sulfide minerals in all Guizhou sediment-hosted Au deposits, except Jinfeng, have very similar δ 34 S values, and most data plot between ~−5 and +5‰. In the Jinfeng deposit, the ore-related sulfide minerals exhibit δ 34 S values ranging from 1.9 to 18.1‰, with most data plotting between 6 and 12‰. The broad range of S isotope compositions for the sedimentary pyrites (pre-ore pyrites 1 and 2) indicate that S in these pre-ore pyrites was most likely generated by bacterial reduction from marine sulfate. The narrow range of δ 34 S values (~−5–+5‰) for ore-related sulfide minerals in all Guizhou sediment-hosted Au deposits, excepting the Jinfeng deposit, suggests that the deposits may have formed in response to a single widespread metallogenic event. As the S isotope fractionation between hydrothermal fluids and sulfide minerals in a sulfide-dominated system is small (<2‰) at ~250°C, the initial ore fluids that formed the Guizhou sediment-hosted Au deposits would have had δ 34 S values similar to the ore-related sulfide minerals, between ~−5 and +5‰. At Jinfeng, initial ore fluids may have mixed with local fluids with heavier δ 34 S, possibly basin brine ( δ 34 S basin brine >18‰), resulting in elevated δ 34 S values of ore-related sulfide minerals and especially late ore-stage sulfide minerals. Although few igneous rocks are exposed in the mining area around these deposits, there is evidence of magmatic activity ~20 km away. Furthermore, gravity and magnetic geophysical investigations indicate the presence of a pluton ~5 km below the surface of the Shuiyindong district. Based on in situ S isotope results and recent data indicating proximal intrusions, we interpret a deep magmatic S source for the ore fluids that formed the Guizhou sediment-hosted Au deposits. However, as the age for Au mineralization of Guizhou sediment-hosted Au deposits is still debated, the mineralization-magma connection remains hypothetical. Identifying an ore fluid source and time frame for Guizhou Au mineralization continues to be a critically important research goal for this district.

Yunnan-Guizhou-Guangxi region↗

USGS2017

Element partitioning in magnetite under low-grade metamorphic conditions – A case study from the Proterozoic Belt Supergroup, USA

The distribution and partitioning of elements in igneous rocks is well established for various melt –(fluid) –solid pairs and provides important insights into the petrogenesis of these rocks. Studies of the partitioning behavior of elements under metamorphic conditions are scarce and commonly focus on high-grade metamorphic facies. Little is known about the partitioning behavior of elements under low-grade metamorphic conditions. Greenschist-facies metasedimentary rocks of the North American Belt Supergroup host magnetite that displays equilibrium features with co-existing mineral phases such as quartz and carbonate. Magnetite is an ideal target for geochemical investigations because it can incorporate a large number of cations and is sensitive to changes in temperature, oxygen fugacity, pressure, whole-rock composition, and cooling trends. Whole-rock major and trace element analyses have been undertaken on representative samples from Belt Supergroup metasedimentary rocks using X-ray luorescence. Electron microprobe and laser ablation ICP-MS were used to obtain major and trace element concentrations for magnetite hosted in these rocks. Stable-isotope geothermometry of magnetite–quartz and magnetite–carbonate pairs constrain metamorphic temperatures to ca. 390°C. Partition coefficients (D) for magnetite–matrix pairs presumably reflect equilibrium at these low-grade metamorphic conditions. Except for Mn and Ni, which show comparable partition coefficients, the calculated values are one to two orders of magnitude lower than those for igneous magnetite. Aluminum displays the lowest calculated partition coefficient with a value of 0.006 and Ni and Fe the highest values with 6.3 and 20.9, respectively. Of the elements that commonly occur in spinel-group minerals, two groups can be distinguished: (1) elements that preferentially partition into the host rock (D<1): Al, Mg, Pb, and Ti and (2) elements that show a preference to partition into magnetite (D>1): Zn, Mn, Cr, V, Ni, and Fe.

European Journal of Mineralogy↗

USGS2011

Visualizing trace element distribution in quartz using cathodoluminescence, electron microprobe, and laser ablation-inductively coupled plasma-mass spectrometry

Cathodoluminescent (CL) textures in quartz reveal successive histories of the physical and chemical fluctuations that accompany crystal growth. Such CL textures reflect trace element concentration variations that can be mapped by electron microprobe or laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS). Trace element maps in hydrothermal quartz from four different ore deposit types (Carlin-type Au, epithermal Ag, porphyry-Cu, and MVT Pb-Zn) reveal correlations among trace elements and between trace element concentrations and CL textures. The distributions of trace elements reflect variations in the physical and chemical conditions of quartz precipitation. These maps show that Al is the most abundant trace element in hydrothermal quartz. In crystals grown at temperatures below 300 °C, Al concentrations may vary by up to two orders of magnitude between adjacent growth zones, with no evidence for diffusion. The monovalent cations Li, Na, and K, where detectable, always correlate with Al, with Li being the most abundant of the three. In most samples, Al is more abundant than the combined total of the monovalent cations; however, in the MVT sample, molar Al/Li ratios are ~0.8. Antimony is present in concentrations up to ~120 ppm in epithermal quartz (~200–300 °C), but is not detectable in MVT, Carlin, or porphyry-Cu quartz. Concentrations of Sb do not correlate consistently with those of other trace elements or with CL textures. Titanium is only abundant enough to be mapped in quartz from porphyry-type ore deposits that precipitate at temperatures above ~400 °C. In such quartz, Ti concentration correlates positively with CL intensity, suggesting a causative relationship. In contrast, in quartz from other deposit types, there is no consistent correlation between concentrations of any trace element and CL intensity fluctuations.

American Mineralogist↗

USGS2011

Trace and minor element variations and sulfur isotopes in crystalline and colloform ZnS: Incorporation mechanisms and implications for their genesis

Various models have been proposed to explain the formation mechanism of colloform sphalerite, but the origin is still under debate. In order to decipher influences on trace element incorporation and sulfur isotope composition, crystalline and colloform sphalerite from the carbonate-hosted Mississippi-Valley Type (MVT) deposit near Wiesloch, SW Germany, were investigated and compared to sphalerite samples from 52 hydrothermal vein-type deposits in the Schwarzwald ore district, SW Germany to study the influence of different host rocks, formation mechanisms and fluid origin on trace element incorporation. Trace and minor element incorporation in sphalerite shows some correlation to their host rock and/or origin of fluid, gangue, paragenetic minerals and precipitation mechanisms (e.g., diagenetic processes, fluid cooling or fluid mixing). Furthermore, crystalline sphalerite is generally enriched in elements like Cd, Cu, Sb and Ag compared to colloform sphalerite that mainly incorporates elements like As, Pb and Tl. In addition, sulfur isotopes are characterized by positive values for crystalline and strongly negative values for colloform sphalerite. The combination of trace element contents, typical minerals associated with colloform sphalerite from Wiesloch, sulfur isotopes and thermodynamic considerations helped to evaluate the involvement of sulfate-reducing bacteria in water-filled karst cavities. Sulfate-reducing bacteria cause a sulfide-rich environment that leads in case of a metal-rich fluid supply to a sudden oversaturation of the fluid with respect to galena, sphalerite and pyrite. This, however, exactly coincides with the observed crystallization sequence of samples involving colloform sphalerite from the Wiesloch MVT deposit.

Wiesloch↗