Geology topics

A. Lima

Publications and source records attributed to A. Lima.

8 recordsLinked to original sources

USGS2015

Soil geochemical survey of abandoned mining sites in the Eastern-Central Peloritani Mountains, Sicily, Italy

This investigation focused on topsoils ( n = 122) and vertical profiles ( n = 6) distributed over an area of 250 km 2 in the eastern-central Peloritani Mountains, northeastern Sicily. Georeferenced concentration of 53 elements (including potentially harmful ones), determined by ICP-MS after an aqua regia leach, were used to produce geochemical maps by means of a GIS-aided spatial interpolation process. Results show that there are two distinct areas: the larger, located between the Fiumendinisi, Budali and Ali villages, and the other between C. Postlioni and Femmina Morta, which contain anomalous As (up to 727 mg/kg), Sb (up to 60 mg/kg), Ag (up to 1 mg/kg) and Au (up to 0.1 mg/kg) concentrations. Most of the investigated areas have high contamination levels for As, Zn, Sb, and Pb that exceed the threshold values (As = 20 mg/kg, Zn = 150 mg/kg, Sb = 10 mg/kg and Pb = 100 mg/kg) established for soils by the Italian Environmental Law ( Decreto Legislativo 2006 , number 152). The isotopic ratios of 206 Pb/ 207 Pb and 208 Pb/ 207 Pb have been measured in selected soils on both leaches [using 1M HNO 3 –1.75M HCl (50:50)] and residues thereof. Soil leach reflects possible anthropogenic contamination, whereas soil residues indicate geogenic contributions. Results suggest that most of contamination in the soils is related to the presence of sulphide and sulphosalt rock-forming minerals in the surveyed area. The soil fraction contains a Pb value >1600 mg/kg and has ratios of 1.1695 for 206 Pb/ 207 Pb and 2.4606 for 208 Pb/ 207 Pb. Only one soil leach isotopic composition could reflect possible anthropogenic contamination. The correlation among As, Zn, Pb contents v. Pb isotopic signatures of 206 Pb/ 207 Pb indicates that surface and deep soils collected from profiles are dominated by geogenic compositions.

Peloritani Mountains, Sicily↗

USGS2011

Lead isotopes in soils and groundwaters as tracers of the impact of human activities on the surface environment: The Domizio-Flegreo Littoral (Italy) case study

The isotopic signature of geogenic and anthropogenic materials, in combination with concentration data for pollutants, can help trace the origin and the extent of contamination in the environment. This approach is particularly effective if naturally occurring and anthropogenically introduced metals have different isotopic ratios. Lead isotope analysis on soils from 7 profiles (1 m depth) and on groundwaters from 8 wells have been used to determine the impact of human activities on the surface environment of Domizio-Flegreo Littoral. Result obtained show that in sub-rural areas the isotopic composition of the samples collected along the soil profiles of Domizio-Flegreo Littoral is likely mostly controlled by the nature of the parent geologic material (natural) while in more urbanized areas (Giugliano) Pb isotopic composition in superficial soils is mostly influenced by anthropic sources such as motor vehicles. Lead isotopic ratios in groundwaters also show that the use of pesticides and, probably, the influence of aerosols and the presence of illegal waste disposal can influence water quality.

The Domizio-Flegreo Littoral↗

USGS2011

Geochemical and isotopic study of soils and waters from an Italian contaminated site: Agro Aversano (Campania)

Lead isotope applications have been widely used in recent years in environmental studies conducted on different kinds of sampled media. In the present paper, Pb isotope ratios have been used to determine the sources of metal pollution in soils and waters in the Agro Aversano area. During three different sampling phases, a total of 113 surface soils (5-20. cm), 20 samples from 2 soil profiles (0-1. m), 11 stream waters and 4 groundwaters were collected. Major element concentrations in sampled media have been analyzed by the ICP-MS technique. Surface soils (20 samples), all soil profiles and all waters have been also analyzed for Pb isotope compositions by thermal ionization (TIMS). The geochemical data were assessed using statistic methods and cartographically elaborated in order to have a clear picture of the level of disturbance of the area. Pb isotopic data were studied to discriminate between anthropogenic and geologic sources. Our results show that As (5.6-25.6. mg/kg), Cu (9-677. mg/kg), Pb (22-193. mg/kg), Tl (0.53-3.62. mg/kg), V (26-142. mg/kg) and Zn (34-215. mg//kg) contents in analyzed soils, exceed the intervention limits fixed by the Italian Environmental Law for residential areas in some of the sampled sites, while intervention limit for industrial areas is exceeded only for Cu concentrations. Lead isotopic data, show that there is a high similarity between the ratios measured in the leached soil samples and those deriving from anthropic activities. This similarity with anthropogenic Pb is also evident in the ratios measured in both groundwater and stream water samples. ?? 2010 Elsevier B.V.

Journal of Geochemical Exploration↗

USGS2001

Pb isotopes and toxic metals in floodplain and stream sediments from the Volturno river basin, Italy

We present results of a stratigraphic and environmental geochemistry study of the eastern sector of the Volturno river basin (Italy) using stream sediment and floodplain drill core samples. The cores, dated back to 7,000 years B.P., have been used to evaluate background (baseline) values. Pb isotopic compositions and toxic metal abundances have been determined to discriminate natural versus anthropogenic sources. The Pb isotopic compositions of the stream sediments overlap the values of Pb in petrol. The results from both stream sediment and drill core samples plot along a mixing line between the field that characterizes the volcanic rocks outcropping in the area (the natural component) and the Pb isotopic composition of petrol used in western Europe. Results suggest a prevalent contribution of the natural component for the Pb in the drill core samples and a prevailing anthropogenic component for the Pb isotopic compositions in the active stream sediments samples.

Environmental Geology↗

USGS2001

Isotope geochemistry and fluid inclusion study of skarns from Vesuvius

We present new mineral chemistry, fluid inclusion, stable carbon and oxygen, as well as Pb, Sr, and Nd isotope data of Ca-Mg-silicate-rich ejecta (skarns) and associated cognate and xenolithic nodules from the Mt. Somma-Vesuvius volcanic complex, Italy. The typically zoned skarn ejecta consist mainly of diopsidic and hedenbergitic, sometimes "fassaitic" clinopyroxene, Mg-rich and Ti-poor phlogopite, F-bearing vesuvianite, wollastonite, gehlenite, meionite, forsterite, clinohumite, anorthite and Mg-poor calcite with accessory apatite, spinell, magnetite, perovskite, baddeleyite, and various REE-, U-, Th-, Zr- and Ti-rich minerals. Four major types of fluid inclusions were observed in wollastonite, vesuvianite, gehlenite, clinopyroxene and calcite: a) primary silicate melt inclusions (THOM = 1000-1050??C), b) CO2 ?? H2S-rich fluid inclusions (THOM = 20-31.3??C into the vapor phase), c) multiphase aqueous brine inclusions (THOM = 720-820??C) with mainly sylvite and halite daughter minerals, and d) complex chloride-carbonate-sulfate-fluoride-silicate-bearing saline-melt inclusions (THOM = 870-890??C). The last inclusion type shows evidence for immiscibility between several fluids (silicate melt - aqueous chloride-rich liquid - carbonate/sulfate melt?) during heating and cooling below 870??C. There is no evidence for fluid circulation below 700??C and participation of externally derived meteoric fluids in skarn formation. Skarns have considerably variable 206Pb/204Pb (19.047-19.202), 207Pb/204Pb (15.655-15.670), and 208Pb/204Pb (38.915-39.069) and relatively low 143Nd/144Nd (0.51211-0.51244) ratios. The carbon and oxygen isotope compositions of skarn calcites (??13CV-PDB = -5.4 to -1.1???; ??18OV-SMOW = 11.7 to 16.4???) indicate formation from a 18O- and 13C-enriched fluid. The isotope composition of skarns and the presence of silicate melt inclusion-bearing wollastonite nodules suggests assimilation of carbonate wall rocks by the alkaline magma at moderate depths (< 5 km) and consequent exsolution of CO2-rich vapor and complex saline melts from the contaminated magma that reacted with the carbonate rocks to form skarns.

Mineralogy and Petrology↗

USGS1999

Understanding Vesuvius magmatic processes: Evidence from primitive silicate-melt inclusions in medieval scoria clinopyroxenes (Terzigno formation)

Microthermometric investigations of silicate-melt inclusions and electron microprobe analyses were conducted on experimentally homogenized silicate-melt inclusions and on the host clinopyroxenes from 4 scoria samples of different layers from the Mt. Somma-Vesuvius medieval eruption (Formazione di Terzigno, 893 A.D.). The temperature of homogenization, considered the minimum trapping temperature, ranges from 1190 to 1260 ± 5 °C for all clinopyroxene-hosted silicate melt inclusions. The major and minor-element compositional trends shown by Terzigno scoria and matrix glass chemical analysis are largely compatible with fractional crystallization of clinopyroxene and Fe-Ti oxides. Sulfur contents of the homogenized silicate-melt inclusions in clinopyroxene phenocrysts compared with that in the host scoria show that S has been significantly degassed in the erupted products; whereas, Cl has about the same abundance in the inclusions and in host scoria. Fluorine is low (infrequently up to 800 ppm) in the silicate-melt inclusions compared to 2400 ppm in the bulk scoria. Electron microprobe analyses of silicate-melt inclusions show that they have primitive magma compositions (Mg# = 75-91). The composition of the host clinopyroxene phenocrysts varies from typical plinian-related (Mg#≥85) to non plinian related (Mg#≤85). The mixed source of the host clinopyroxenes and primitive nature of the silicate-melt inclusions implies that these phenocrysts, in part, may be residual and/or have a polygenetic origin. The similar variation trends of major and minor-elements between homogenized silicate-melt inclusions from the Terzigno scoria, and silicate-melt inclusions in olivine and diopside phenocrysts from plinian eruptions ( Marianelli et al., 1995) suggest that the trapped inclusions represent melts similar to those that supplied the plinian and sub-plinian magma chambers. These geochemical characteristics suggest that the Vesuvius magmatic system retained a vestige of the most recent plinian event.

Mt. Somma-Vesuvius↗

USGS1991

Rock chemistry and fluid inclusion studies as exploration tools for ore deposits in the Sila batholith, southern Italy

The Sila batholith is the focus of an extensive petrogenetic research program, which includes an assessment of its potential to host granite-related ore deposits. Univariate and multivariate statistical techniques were applied to major- and minor-element rock geochemical data. The analysis indicates that the highest potential for mineralization occurs in corundum-normative, peraluminous, unfoliated, relatively late-stage plutons. The plutons are enriched in Rb, Nb, Ta and U, but depleted in Fe, Mg and Sr. The K/Rb, Ba/Rb, Rb/Sr and Rb 3 /Ba·Sr·K indices and high R -factor scores of Si-K-Rb are typical of mineralized granitic rocks. A reconnaissance fluid inclusion study indicates that the sub-solidus rock was infiltrated by solutions of widely different temperatures (50–416°C) and variable salinities (0 to ∼26 wt.% NaCl equivalent). The higher-temperature solutions probably represent granite or magmatic-related Hercynian fluids, whereas the lower-temperature fluids may be either Hercynian or Alpine in age. Fluids with characteristics typical of mineralized “porphyry” systems have not been recognized.

Journal of Geochemical Exploration↗

USGS1989

The campi flegrei (Italy) geothermal system: A fluid inclusion study of the mofete and San Vito fields

A fluid inclusion study of core from the Mofete 1, Mofete 2, Mofete 5, San Vito 1, and San Vito 3 geothermal wells (Campi Flegrei, Campania, Italy) indicates that the hydrothermal minerals were precipitated from aqueous fluids (??CO2) that were moderately saline (3-4 wt.% NaCl equiv.) to hypersaline (> 26 wt.% NaCl equiv.) and at least in part, boiling. Three types of primary fluid inclusions were found in authigenic K-feldspar, quartz, calcite, and epidote: (A) two-phase [liquid (L) + vapor (V)], liquid-rich inclusions with a range of salinity; (B) two-phase (L + V), vaporrich inclusions with low salinity; and (C) three-phase [L + V + crystals (NaCL)], liquid-rich inclusions with hypersalinity. Results of microthermometric and crushing studies are reported for twenty drill core samples taken from the lower portions of the five vertical wells. Data presented for selected core samples reveal a general decrease in porosity and increase in bulk density with increasing depth and temperature. Hydrothermal minerals commonly fill fractures and pore-spaces and define a zonation pattern, similar in all five wells studied, in response to increasing depth (pressure) and temperature. A greenschist facies assemblage, defined by albite + actinolite, gives way to an amphibolite facies, defined by plagioclase (andesine) + hornblende, in the San Vito 1 well at about 380??C. The fluid inclusion salinity values mimic the saline and hypersaline fluids found by drilling. Fluid inclusion V/L homogenization temperatures increase with depth and generally correspond to the extrapolated down-hole temperatures. However, fluid inclusion data for Mofete 5 and mineral assemblage data for San Vito 3, indicate fossil, higher-temperature regimes. A limited 87Sr/86Sr study of leachate (carbonate) and the leached cores shows that for most samples (except San Vito 3) the carbonate deposition has been from slightly 87Sr-enriched fluids and that Sr isotopic exchange has been incomplete. However, San Vito 3 cores show an approach to fluid/rock Sr equilibrium with a fluid similar to modern ocean water in 87Sr/86Sr ratio. The Campi Flegrei volcanic system has evolved undersaturated products, mostly trachyte, and defines a large (??? 12 km) caldera. The hydrothermal system developed in this location can be used as an analog for fossil systems in similar trachytic environments. The potential for ore mineralization is expressed by the recognition, from fluid inclusion and drilling data, of ore-forming environments such as boiling and brine stratification. ?? 1989.

Journal of Volcanology and Geothermal Research↗